Key Takeaways
- Flat EBITDA despite sales growth: Employee costs rose 15% and initiative spending consumed 1.2% of EBITDA, leaving underlying profitability roughly flat YoY. PBT grew 28% only because of a one-off US property sale.
- Europe restructured, not yet profitable: Deep cost cuts and a sales reorganisation have been completed, but the region remains a drag. Management expects the P&L to improve in the second half and turn profitable thereafter.[14-15]
- US tariffs fully mitigated on profit, not on revenue: The $9 million tariff impact on industrial products has been neutralised through cost actions, so profitability is protected even at current rates. A tariff reduction would now be pure upside.
- India growth is steady but unspectacular: Consolidated growth of 7–8% masks pockets of strength in industrials and aftermarket, offset by a weak textile segment and slowing portable compressor demand. Inquiry pipelines are strong but conversion times have lengthened.[21-22]
- What to watch next quarter: Whether the Europe cost cuts actually flow through to the P&L, the pace of India go-to-market traction, and any update on the US direct-sales experiment.
Europe: Restructuring & Path to Profitability
- Problem redefined: The strategy that successfully gained entry and initial growth is now insufficient. The new question is how to accelerate growth, prompting a fundamental reset of the go-to-market model.
- Sales organisation split: The team has been restructured into a channel arm (managing existing partners) and a direct arm (connecting with end users in partnership with distributors). This hybrid model is designed to work within the existing cost envelope.
- Cost base resized: Management cut deeply, resizing the organisation to the most realistic revenue level based on the last 1.5 years of experience. Exit costs from this restructuring will be incurred in the remaining quarters.
- People cost reduction: A ~€1 million reduction in employee costs has been initiated and completed, but the benefit has not yet appeared in reported numbers. It will show in subsequent quarters.[14-15]
- Profit zone ahead: The combination of cost reduction and specific top-line growth initiatives is expected to take Europe into a profit zone, allowing the company to start recovering investments made in the region. [14-15]
Jairam Varadaraj: "So, what we have done is really gone back and cut deeply on some of our costs and resized the organization to the most realistic level of revenue considering our experience in the last 1.5 years."
US: Tariffs, Mitigation & a New Go-to-Market
- Tariff impact quantified: The combined impact of a 50% tariff on India exports and a 15% tariff on Italy exports to the US is $9 million, split across portable and industrial verticals. No impact was felt in Q2 as inventory was bled out; Q3 will see the impact at the contribution margin level in the industrial product vertical, but not at the consolidated P&L level.[10-11]
- Profitability protected: Mitigation measures are fully in place. Management is confident that even at current tariff rates, profitability on the industrial side will not be compromised. If tariffs drop from 50%, profitability will rise.
- Mitigation surplus next year: Assuming a certain growth rate, the tariff impact is expected to be fully mitigated with surplus in the next financial year (2026-27).
- Go-to-market experiment: Management is exploring a hybrid model where ELGi's own people go directly to customers in distributor territories, partnering with distributors for aftermarket service. Distributors' profit primarily comes from aftermarket, so ELGi does not intend to compete there. The experiment is not yet implemented or finalised. [15-16]
- Distributor inertia acknowledged: As a late entrant, ELGi faces distributors with well-entrenched relationships with other compressor brands, making it slow to break in. The direct-sales exploration is a response to this structural challenge.
- Growth ambition: The goal in the US is top-line growth and discovering new go-to-market avenues for disproportionate growth, as part of the long-term CK2 aspiration. Industrial is growing but not fast enough.
Management: "If the tariffs continue now with the mitigation done, our profitability will not get compromised. But if tariffs go down, then obviously the profitability would go up on the industrial side."
India: Steady Growth, Slower Conversions
- Pockets of strength: Industrial products grew faster than construction and mining. The automotive aftermarket (garages) is seeing an uptick. Aftermarket contribution is ~30% of revenue from the domestic installed base.
- Pockets of weakness: Textiles remain in "quite bad shape" and ELGi is not growing in that segment. Portable compressor growth, driven for two years by construction activity, has "kind of come down." [21-22]
- Go-to-market initiative gaining traction: A programme kicked off 1.5 years ago is showing marginal improvements across segments. Management expects Q3 to show more impact than Q2, and believes there is significant opportunity to grow faster than 7–8% by gaining share.
- Inquiry pipeline strong, conversion slow: The inquiry bank is healthy but conversion time has extended compared to 1–1.5 years ago. General market sentiment reflects a "wait and see" approach post-tariffs: companies prefer milking existing capacity rather than investing in new capacity.
- Tariff sentiment stabilising: Management believes the "tariff-based depression in the market" has passed, with everyone calibrating to the reality that tariffs will not be zero but will not stay at current levels either.
Management: "Everyone believes that this tariff is not going to be at this level, but everyone also realizes tariff is not going to be 0, right? So, everyone's calibrating to various percentages and they've come to terms with it."
Product & Technology Initiatives
- Demand=Match launched: The stabiliser product (formerly called stabiliser) was launched commercially in October across India. It is now standardised as a standard offering, not an option, across products. A retrofit programme has been kept ready but not yet launched; management may look at it in Q3/Q4.
- Retrofit opportunity: For ELGi's own installed base, the retrofit opportunity is 3,000–4,000 machines per year, at an estimated cost of 10–15% of machine value. The product is technically usable with any screw compressor, but payback viability for non-ELGi customers may not make it worthwhile, so no sales programme is being built for that.[19-20]
- Low-cost compressor: Compressors are running in the field for validation. The internal target for launch is 1st April, and definitely by Q1 of next year. The product targets a customer segment that prioritises low upfront capital cost over energy efficiency, either because annual power consumption is low or power cost is a small part of their P&L. [17-18]
- Motor in-sourcing: By FY26-27, 75–80% of motor volume globally will be made in-house. The P&L impact was not quantified on the call.
- Capex plan: ₹600 crores over five years, of which ₹250 crores is firmed up but delayed ~12 months due to hard rock. The balance ₹350 crores has its architecture and master plan done, but detailed planning is not yet complete.
Management: "There is a certain segment of customers in the market for whom performance in terms of energy efficiency, energy cost is not a major factor either because their overall power consumption in a year is low or because power cost is such a small part of their overall P&L, they don't care. They want to look at low upfront capital cost." [17-18]
Financials: Costs, Margins & Cash
- Employee cost up 15%: The increase breaks down into 6% normal increase, 4% currency impact, and 3% headcount growth. Critically, this does not yet reflect the European employee cost reduction, which will show in subsequent quarters.
- Initiative spending a drag: Initiatives consumed 1.2% of EBITDA. Without that spend, the EBITDA percentage would have been close to the prior year.
- Gross margin declined modestly: Per an analyst's math, gross margin was 51.9%, down ~50 bps YoY and ~30 bps QoQ. Management attributed this to product mix and described it as a "beneficial blip," seeing no challenges on pricing or material cost.
- Cash generation healthy: Driven primarily by a reduction in receivables, which were managed well and brought under control. Inventory reduction in the US was not a major factor, as the company paused inventory redeployment plans and held on to lower-cost historical inventory.
- Cost control initiatives underway: Multiple projects are running: renewable energy over-indexing (₹5–6 crore annual savings), container cost optimisation, transportation, travel reduction, and in-house motor production savings. The net benefit was not quantified. [12-13]
- Inventory management push: An internal project to bring greater control and deliberateness to inventory is expected to gain momentum in Q3 and Q4 across Europe and India.
Aftermarket & Overseas Arithmetic
- Aftermarket as a structural growth lever: In India, where the installed base is mature, aftermarket contributes ~30% of revenue. In overseas markets where the installed base is smaller (indexed at 25 vs India's 100), aftermarket is only ~12%. As the overseas installed base grows toward 100, the aftermarket contribution should migrate toward 30%.
- Velocity of growth increasing: Management is focused on increasing the velocity of aftermarket growth to get the installed base from 25 to 100 in large overseas markets sooner.
- Balancing figure explained: The gap between overseas sales and exports to subsidiaries contains multiple pieces: profit on exports to subsidiaries, accessories branded in ELGi's name but bought from outside, and in the US and Australia, an additional layer of profit on equipment sales plus service and spare parts from own distribution operations. The profit question on this figure was not answered and was taken offline.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Europe P&L improvement | Cost cuts plus top-line initiatives to take Europe into profit zone | Balance of FY26; cost cuts visible in subsequent quarters[14-15] |
| US tariff mitigation | $9 million impact fully mitigated; profitability protected at current rates | Already done; surplus expected in FY27 |
| India go-to-market traction | Expects Q3 to show more impact than Q2 | Q3 FY26 |
| Low-cost compressor launch | Internal target 1st April | Definitely by Q1 FY27 |
| Motor in-house production | 75–80% of global motor volume made in-house | FY26-27 |
| Capex (₹250 cr firmed up) | Delayed ~12 months due to hard rock | No revised date given |
| Revenue & EBITDA guidance | Management to provide well-thought-through guidance | Q3 or full-year call |
Key Metrics
| Metric | Q2 FY26 |
|---|---|
| Revenue growth | 11% YoY |
| EBITDA margin | 14.9% of revenue vs 16.3% last year; 1.2% of EBITDA spent on special initiatives |
| PBT growth | 28% YoY, driven by one-off US property sale; flat excluding this gain |
| PAT | ₹94.7 cr, roughly similar to previous year and previous quarter |
| Employee cost growth | 15% YoY: 6% normal increase, 4% forex impact, 3% headcount addition |
| Gross margin | 51.9% (per an analyst's math), ~50 bps lower YoY and ~30 bps lower QoQ |
| Net cash position | Improved sequentially; better management of receivables and inventory |
| India standalone revenue growth | ~7–7.5% average over past four quarters |
| Europe market share | 3–4% currently; targeting 6–7% |
| Europe cumulative investment (losses) | ~€25 million, roughly ₹250 cr |
| Europe cost reduction | ~€1 million annual people cost reduction initiated |
| US tariff impact (FY26-27, pre-mitigation) | $9 million at EBITDA level; fully mitigated with cost actions and price increases |
| US tariff benefit if rates halved | ~$3 million EBITDA benefit (management guesstimate) |
| Capex plan | ₹600 cr over five years; ₹250 cr firmed up, delayed ~12 months due to hard rock |
| In-house motor production (FY26-27) | 75–80% of global motor volume to be produced in-house |
| Demand=Match retrofit opportunity | 3,000–4,000 machines per year; retrofit cost ~10–15% of machine value |