Key Takeaways
- Best Q3 in India after a long period, driven by two-wheeler strength and premiumisation, while Europe managed capacity constraints and Maxwell posted a small EBITDA loss on delayed EV launches.
- ₹164 cr of new orders booked in Q3, including ₹60 cr of EV and four-wheeler casting business, with major wins from Suzuki, HMSI, Punch Powertrain and Royal Enfield.
- Underlying margin improved QoQ once a one-off mega project incentive is stripped out: EBITDA rose from 11.9% in Q2 to 12.2% in Q3, despite raw material cost staying elevated at 66.3% of sales.
- A clear FY30 roadmap was laid out: grow four-wheeler share from 26% to 45% of consolidated revenue, lift aftermarket to 10% of India sales by FY28, and become a significant player in advanced electronics.
- What to watch next quarter: whether Maxwell returns to profitable growth as guided, the pace of new-order ramp-ups (Suzuki, HMSI, Hero brakes), and any further clarity on Bajaj BMS engagement.
India Operations: Premiumisation & New Order Ramp-Up
- Two-wheeler strength: The quarter was the best Q3 in India after a long period, with major customer Bajaj Auto performing well across Triumph, KTM and Chetak, and growth concentrated in high-end bikes.
- Premium mix shift: Growth is coming from 150cc-plus bikes carrying higher-value content: inverted front forks, rear mono shock absorbers, high-end brake assemblies, ABS and assist-and-slip clutches.
- Brakes scaling fast: Motorcycle brake assemblies reached about 75,000 sets per month; scooter brakes started this month; the target is 100,000 brake assemblies per month for TVS, the second-largest brake customer after Bajaj.
- Structural castings leadership: Management claims near sole-supplier status in structural aluminium castings, with orders from Bajaj Auto, KTM and Piaggio already in production and TVS SOP planned for April 2024.
- New plant readiness: A second disc brake assembly plant at Waluj started SOP last year and will supply Hero MotoCorp from April 2024 and HMSI from end-Q3 FY25; a third aluminium forging press started in February 2024, with a fourth coming in Q1 FY25.
- Suzuki win: ₹165 cr of orders received for new front fork and rear shock business, with SOP in Q3 FY25, adding to an earlier ₹140 cr Suzuki order also starting in Q3 FY25.
Anurang Jain: "My belief is at Endurance; we have to be in all the segments plus the non-automotive because we don't know where the industry growth will reside."
Europe: Capacity-Led Slowdown, Order Book Healthy
- Capacity constraints bite: New business acquisition was deliberately slowed because the European operations are space-constrained; the company is acquiring new land and constructing new buildings to unlock growth.
- Order intake still healthy: EUR 249 million of new orders won over the last four years against an annual turnover of roughly EUR 250 million, though the last nine months added only EUR 29 million as the brakes were applied.
- Investment underway: EUR 50 million is being invested this year for production capacity, and management expects a larger share of revenue to come from newer orders in coming years, albeit with some delay in EV ramp-ups.
- Cost structure: Employee costs rose 6% from June 2023 linked to inflation; the Q3 vs Q2 increase in other expenses was driven by inventorisation of costs for stock build and product mix, while material cost incidence correspondingly decreased.
Massimo Venuti: "We have also slowed down new business acquisition. But by and large, we continue to quote for new business."
Maxwell: EV Volatility & The Path to Profitability
- Q3 loss: Maxwell posted a ₹3.37 cr EBITDA loss, attributed to postponement of new EV launches by customers.
- Turnaround thesis: Management is fully focused on profitable growth from FY25, supported by an in-house SMT line for BMS assembly at Waluj (SOP February 2024) and new products with lower raw material content and higher margins.
- Regulatory tailwind: The AIS-156 norm has eliminated low-cost Chinese PCM competitors; OEMs are now moving toward functionally safe BMS, a trend that favours Maxwell's technology position.
- Order book building: Maxwell won a new BMS order from Royal Enfield this month (SOP January 2025), has large orders from Greaves Electric, and a Hero Electric order postponed by FAME II subsidy uncertainty is expected to start from Q1 FY25.
- Bajaj BMS still elusive: Management acknowledged they are a late entrant and that Bajaj has commitments to an existing supplier; "right now, we have no wins from Bajaj."
Vishwas: "Now with AIS-156 coming in from last year, so these low cost options have gone off... many of the OEMs are realizing that they have to move towards a more functionally safe BMS... this trend is going to continue, and that's where Maxwell is getting a lot of advantages."
Margin Walk: Underlying Improvement Masked by Incentive
- Headline vs underlying: Reported EBITDA margin was flat QoQ, but Q2 included a mega project incentive booking; excluding that one-off, EBITDA rose from ₹233.6 cr (11.9% margin) in Q2 to ₹244.7 cr (12.2% margin) in Q3.
- Raw material headwind persists: Raw material cost as a percentage of sales stood at 66.3% in 9M FY24, roughly 3-4 percentage points higher than when Endurance was delivering 14.5-16.5% margins historically. Management argues the current margin performance is therefore stronger than it appears.
- Mega project incentive winding down: FY24 was the last big year under the 2013-2019 scheme, with close to ₹60 cr booked; going forward, only smaller amounts (10% held back for GST audit) may be released, possibly some in Q4.
- Profitability levers: Management is working with the Endurance Vendor Association to keep raw material percentage in check, while shifting the product mix toward higher-margin four-wheeler, premium two-wheeler and non-automotive business.
Strategic Roadmap: FY30 Targets
- Four-wheeler share: Target to increase consolidated four-wheeler revenue from 26% to 45% by FY30, starting with aluminium castings and forgings, and supplemented by acquisitions, JVs or technology collaborations in brakes, suspension and new products for both ICE and EV.
- Aftermarket ambition: Reach 10% of India sales by FY28, up from 5.58% growth in 9M FY24; exports already go to 33 countries, with two more in Central and Western Africa to be added in FY24.
- Advanced electronics: Become a significant player in BMS and new electronic products for EVs and other applications; ABS valve manufacturing started March 2023, dual-channel ABS supply begins June 2024, and ABS capacity expands to 0.12 crore units per annum by H2 FY26.
- Non-automotive diversification: Already supplying generator castings to Generac (USA) and cell-tower castings to Sanmina; a special team is being built to grow this segment, with aluminium casting as the entry point.
- Sustainability: Furnace oil use completely stopped; 30% carbon neutral achieved in FY24; targeting more than 50% by FY30, plus zero waste to landfill.
Anurang Jain: "We have to be careful and ensure that in terms of acquisitions, we are able to manage and sustain profits. That's our philosophy but definitely reaching to 45% is a clear target which we intend to achieve by FY30."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Maxwell profitable growth | Return to profitability after Q3 EBITDA loss | From FY25 |
| ₹3,872 cr new business peak | Cumulative new business since FY20 reaches peak sales | FY26 |
| TVS business peak | ₹527.8 cr business reaches peak | FY25 |
| EV scooter parts peak | ₹100 cr per annum peak | FY25 |
| Aluminium forging peak | Additional ₹75 cr business at peak | FY25 |
| Maxwell business peak | ₹378.5 cr order book fully realised | FY27 |
| Dual-channel ABS supply start | Supply begins | June 2024 |
| ABS capacity expansion | Reach 0.12 crore single and dual channel ABS per annum | H2 FY26 |
| Four-wheeler share target | Grow from 26% to 45% of consolidated revenue | FY30 |
| Aftermarket share target | Reach 10% of India sales | FY28 |
| Carbon neutral target | Reach more than 50% | FY30 |
| Suzuki front fork and rear shock SOP | ₹165 cr new order plus earlier ₹140 cr order | Q3 FY25 |
| Hero MotoCorp brake assembly SOP | Supply from second Waluj plant | April 2024 |
| HMSI brake assembly SOP | Supply from second Waluj plant | End of Q3 FY25 |
| KTM Austria air suspension SOP | 35 dia air suspension inverted front forks exported directly | Q3 FY25 |
Key Metrics
| Metric | Q3 FY24 |
|---|---|
| Consolidated Total Income | ₹2,588.08 cr, +22.8% YoY |
| Consolidated EBITDA | ₹325.97 cr, +29.9% YoY |
| Consolidated EBITDA margin | 12.6% |
| Consolidated PAT | ₹152.28 cr, +40.7% YoY |
| Consolidated PAT margin | 5.9% |
| Standalone Total Income | ₹2,006.97 cr, +25.1% YoY |
| Standalone EBITDA | ₹244.67 cr, +31.8% YoY; margin 12.2% |
| Standalone PAT | ₹132.4 cr, +43.6% YoY; margin 6.6% |
| Endurance Overseas sales | EUR 63.38 million, +5.4% YoY |
| Endurance Overseas EBITDA margin | 15.5% |
| Maxwell EBITDA loss | ₹3.37 cr |
| Net cash (consolidated) | ₹463.6 cr |
| India new business won (ex-Bajaj, 9M FY24) | ₹941 cr, peak in FY26; comprises ₹567.9 cr new and ₹373.2 cr replacement |
| Total EV business win till date (ex-Maxwell) | ₹677.7 cr |
| Maxwell business won since FY22 | ₹378.5 cr, fully realised by FY27 |
| Aftermarket sales (9M FY24) | ₹325.73 cr, +5.58% YoY |
| Export sales, India standalone (9M FY24) | ₹148.73 cr, +7.37% YoY |