Key Takeaways
- Pipes volume surged 28% YoY, resin segment dragged: Strong agri and non-agri demand drove pipes & fittings growth, while the PVC resin business suffered from a sharp contraction in PVC/EDC and PVC/VCM deltas and a month-long maintenance shutdown.
- Pipe EBIT margin rebounded to INR12/kg: The recovery from 6% in the December quarter to 11% was driven by low inventory losses, better overhead absorption on higher volumes, and lower fuel costs. Management calls this level sustainable for the full year.
- PVC delta hit a multi-year trough, now improving: Management believes Q1 PVC/EDC and PVC/VCM deltas were the lowest in 4-5 years, with current-quarter deltas already showing recovery, though commodity price unpredictability remains a caveat.
- Surplus cash decision is imminent but undated: The company is evaluating a buyback, exceptional dividend, or expansion to deploy excess cash, with a decision promised "soon," but no timeline was committed.
- What to watch next quarter: Whether the PVC delta recovery holds into Q2, the pace of non-agri volume growth as the lean season begins, and any concrete announcement on surplus cash distribution.
Pipes & Fittings: Volume Surge and Margin Recovery
- Broad-based volume growth: Pipes & fittings volumes grew 28% YoY, driven by improved demand dynamics across all geographic regions and both rural and urban segments. Dryness and fear of a prolonged dry spell at the quarter's start pulled demand forward.
- Agri demand structurally resilient: Whether in deficit or excess rainfall, pipelines remain necessary for water transport. A rain deficit forces water movement from source to farm; a good crop after excess rain gives farmers money to invest in irrigation infrastructure.
- Non-agri growth accelerating: Non-agri segment volume increased over 40% from Q1 FY20 to Q1 FY24. Management expects non-agri to grow faster than agri going forward, supported by aggressive retail outlet expansion and a push into large cities.
- Fittings plant ramping up: The new fittings factory, which started in March 2023, ran for a full quarter in Q1 and is expected to reach peak installed capacity by end of July or early August. Contribution is improving but still modest as utilization ramps up.
- Channel inventory normalized: After skepticism in March when prices were declining, stable-to-rising prices over the last month have brought channel inventory back to normal levels.
Niraj Kedia: "When you have higher volumes, there is a better absorption of the overhead. Plus, in this quarter, we have seen fuel prices gradually coming down."
PVC Resin: Delta Compression and Shutdown Hit
- Delta collapse drove the segment down: PVC prices declined from ~135 to 78-79 levels during the quarter, while feedstock (EDC, VCM) prices corrected with a lag. The PVC/EDC delta fell to ~USD460 and the PVC/VCM delta dropped below USD150.
- Maintenance shutdown compounded the pain: A nearly one-month shutdown taken in April for maintenance, deferred from September/October of the prior year, significantly reduced resin volumes.
- Margin shrinkage mechanics: EDC and VCM bought toward end-March and April were processed and ready for sale only after PVC prices had already fallen, directly compressing resin segment margins.
- Current delta recovery underway: The PVC/EDC delta has improved to 540 from a Q1 average of 468, and the PVC/VCM delta to USD200 from a Q1 average of USD133. Management's personal view is that Q1 marked the bottom, but commodity prices remain unpredictable.
Niraj Kedia: "What we have seen in the first quarter has been the bottom in the last 3, 4, 5 years. But whether it has bottomed out, I mean it can be anybody's guess."
Margin Drivers and Sustainability
- Pipe EBIT margin walk: The jump from 6% in Q4 to 11% in Q1 was driven by three factors: negligible inventory losses due to low pipe and fittings inventory levels amid high demand since November; 10% higher volumes improving overhead absorption; and gradually declining fuel prices.
- No one-off contributors: Management attributed the margin improvement to structural factors: product mix, strong non-agri growth, volume contribution, better fixed cost allocation across 92,181 metric tonnes, low inventory levels, and a favorable forex comparison versus the prior year's forex loss in the same quarter.
- Fittings plant contribution still small: The new fittings plant helps margins but is still ramping up and not at full capacity utilization, so its impact is not yet significant.
- Depreciation step-up: Depreciation increased sequentially and YoY due to a useful life evaluation, adding INR5-6 crores. This is expected to normalize to INR25-26 crores per quarter through the year.
Capital Allocation: Surplus Cash Overhang
- Three options on the table: Management explicitly named a buyback, an exceptional dividend, or using the money for expansion as the three possible uses for surplus cash.
- Decision promised "soon," no date: Management acknowledged the need for better distribution of surplus cash to shareholders and said a decision should be soon, but declined to commit to any specific date or confirm whether action would occur in FY24.
- Expansion unlikely to absorb all cash: The company does not plan to expand PVC capacity, as that introduces variability. Debottlenecking within the existing 30-year-old plant is the preferred approach to maintain capacity. No modular capacity addition is needed in pipes and fittings this year.
- Capex run-rate: FY24 capex is guided at INR200-250 crores, with FY25 in the same range, largely for PVC resin maintenance and moulds for the pipe and fittings business.
Niraj Kedia: "See, generally, we are not used to carrying so much of cash. If you're not able to allocate this in the business, this will go back to the shareholders."
Strategic Direction: Focused, Not Expanding
- No adjacencies planned: The company has decided to stay focused on pipes and fittings and is not looking at entering infrastructure pipe, water tanks, or other building material categories in the near future.
- No plan to dispose Finolex Cables holding: Management confirmed there is no plan to dispose of the investment in Finolex Cables as of now.
- Agri vs non-agri mix shift: The current mix is 70% agri, 30% non-agri. The 5-year intent is to reach a 50:50 split, with non-agri expected to grow faster while agri is defended. Agri growth is expected in high single digits, in line with the market.
- Decentralized manufacturing under evaluation: The company is evaluating whether to expand into decentralized manufacturing locations, but noted the humongous investment needed in dies, moulds and extruders to produce all 2,300 SKUs across distributed locations.
Ajit Venkataraman: "See, we would like to defend our agri market, but at the same time, go aggressive with our non-agri. So we expect non-agri to move faster."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Pipe EBIT margin | INR12 per kg sustainable at a full-year level | Full year FY24 |
| Volume growth CAGR | 15% sustainable volume growth | Next 3-5 years |
| Resin production volume | ~230,000 tonnes | FY24 |
| Resin production volume | 250,000-260,000 tonnes | FY25 (next year) |
| Normalized resin EBIT | INR14 to INR15 per kg in a normal year | Normalized year (no date) |
| Capex | INR200-250 crores, largely maintenance and moulds | FY24 and FY25 |
| Fittings plant capacity | Reach peak installed capacity | End of July / early August 2023 |
| Agri vs non-agri mix | 50% each | 5-year horizon |
| Surplus cash distribution | Decision on buyback, exceptional dividend, or expansion | "Soon" (no date committed) |
Key Metrics
| Metric | Q1 FY24 |
|---|---|
| Total income from operations | ₹1,179.17 cr, almost flat vs ₹1,189.81 cr in Q1 FY23 |
| EBITDA | ₹152.47 cr, +21% YoY from ₹125.91 cr in Q1 FY23 |
| EBITDA margin | 12.93%, up from 10.58% in Q1 FY23 |
| Profit after tax | ₹110.88 cr, vs ₹100.9 cr in Q1 FY23 and ₹158.35 cr in Q4 FY23 |
| Pipes and fittings revenue | ₹1,154.21 cr, +2% YoY from ₹1,132.01 cr in Q1 FY23 |
| Pipes and fittings volume | 92,181 metric tons, +28% YoY from 71,960 metric tons in Q1 FY23 |
| Pipes and fittings EBIT | ₹126.44 cr, +197% YoY from ₹42.58 cr in Q1 FY23; +40% QoQ from ₹90.32 cr in Q4 FY23 |
| PVC Resin segment revenue | ₹359.41 cr, -54% YoY from ₹784.58 cr in Q1 FY23 |
| PVC Resin segment volume | 46,074 metric tons, -27% YoY from 62,746 metric tons in Q1 FY23; impacted by a month-long maintenance shutdown in April |
| PVC Resin segment EBIT | ₹3.12 cr, vs ₹72.9 cr in Q1 FY23 |
| Net cash surplus | ₹1,650 cr as on 30th June 2023 |
| Agri vs non-agri volume mix (pipes and fittings) | 70:30, both segments grew 28% YoY |
| PVC/EDC delta | USD468, vs USD785 in Q1 FY23 |
| PVC/VCM delta | USD133, vs USD279 in Q1 FY23 |
| Pipes and fittings EBIT per kg guidance (full year) | ₹12, management considers this sustainable on a full-year basis |
| PVC Resin production target (FY24) | ~230,000 tonnes |
| Capex guidance (FY24) | ₹200 cr to ₹250 cr, largely for PVC Resin maintenance and moulds for pipes and fittings |
| Distributor and touch point network | ~800 distributors and ~22,000 touch points |