Key Takeaways
- Plywood margins hit double digits, capacity the only brake: Core EBITDA margin reached 10.05% (up 180 bps YoY and 160 bps QoQ) on premiumisation, but volume growth slowed to 6.1% because plants ran above 100% utilisation.
- MDF margin held despite full price rollback: Realisation fell after Q1 price hikes were passed back, yet EBITDA margin stayed at 15.2% as mix improvement and cost efficiencies absorbed a permanent chemical cost increase of 7–8%.
- SAMET JV drag ends January 5: The dilution to 19% is signed and dated; Greenply has already stopped funding losses, and the partner will carry the JV forward toward a listing.
- Industry shakeout is the MDF thesis: Management expects unorganised players to shut down in 6–12 months, after which returns can structurally improve; the next 12 months will be "further bad."
- What to watch next quarter: Whether MDF volume hits the 63,000 CBM quarterly target, the Odisha plywood plant stays on track for Q4 FY27, and any update on the new MDF line timeline (expected Q2 FY28).
Plywood: Premiumisation Driving Margins, Capacity Capping Growth
- Volume constrained, not demand: 6.1% YoY volume growth was below the 10%+ run-rate solely because plant utilisation exceeded 100%; management prioritised margin over volume given capacity limits.
- Realisation jump: Value growth of 15.5% YoY on 6.1% volume growth implies a blended realisation of ₹264 per sq m, driven by better sales of premium products and the Green value range.
- Margin breakout: Core EBITDA margin improved 180 bps YoY and 160 bps QoQ to 10.05%, attributed to focus on value-added products, traction from the TermiVax campaign, and better product mix.
- Capacity relief timeline: The constraint eases when Odisha starts in Q4 FY27 (~2 quarters) and Sandila expansion (1.5 crore sq m, ₹125 crores capex) starts in Q4 FY28 (~4–5 quarters); post-Odisha, the volume growth challenge should not persist.
- Margin ambition: Management sees no reason the segment cannot do 11–12% or higher once quarterly revenue crosses ₹600 crores, giving overall scale, and new manufacturing setups start saving costs.
- Pre-lam plywood entry: Trials are complete and commercial full-scale production starts around November; management believes this will "really change the ready-made furniture segment" with Greenply as the first company to do it in India at scale.
Sanidhya Mittal: "We are not assuming that we'll again face a cycle where the prices will come down and we feel that we are anyways in the top pricing, so we don't see a scope for further increase from here. So, if there's any gain, that should be an additional add to the margin."
MDF: Margin Resilience in a Price War, Shakeout Ahead
- Volume missed target on production disruption: 16.1% YoY volume growth fell short because monsoons and annual maintenance (planned for 1 day, ran for 4 days) disrupted production; sales of 54,605 CBM exceeded production of ~53,000 CBM.
- Price hikes fully reversed: Realisation fell to ₹31,816 per CBM as the price increases taken in Q1 were completely passed back due to high competitive intensity.
- Margin held through mix and cost work: Despite a 7–8% permanent cost increase from chemicals and the full price rollback, EBITDA margin held at 15.2% because of increased Pre-lam volumes replacing plain interior grade, energy cost reductions, and other operational efficiencies.
- H1 margin expanded: H1 FY27 margin of 16.3% expanded 350 bps YoY, demonstrating the structural improvement in the cost base.
- Full-year volume guidance revised down: Management now expects approximately 20% volume growth for FY27, revised from earlier guidance due to the H1 shortfall.
- H2 volume target: Targeting 63,000 CBM per quarter for Q3 and Q4, which management deems achievable on both production and sales.
- Margin guidance maintained: Expect to hold core EBITDA margins in the 15–16% range for the full year, with confidence in maintaining above ₹5,000 per CBM.
- Competitive intensity rising: Action TESA has started a plant in the South, Elixrr is starting soon, and Greenply's own new line is running ahead of schedule; management sees no challenge selling current and next-line capacity given brand strength, with challenges expected only from the third or fourth line onward.
- Unorganised players under severe pressure: Management expects some unorganised players to shut down in the next 6 months to 1 year because they cannot survive at current margin levels.
- Industry returns to improve after pain: The next 12 months will be "further bad," but after that structurally things can change once smaller players die out and demand catches up; ROC can move from ~17–18% currently to 20–23%.
- New big entrants unlikely: Given the current industry scenario, new large entrants will not be interested; those who had already committed have come in, and smaller players will die a natural death.
- Imports not a threat: Even if imports have slightly increased, the total quantum is far below historical levels; geopolitics, war, and freight costs do not support MDF imports.
Sanidhya Mittal: "The 15.5%, that Q1 everybody had taken a price rise, today that's more or less completely passed back. But in spite of that scenario, we have been able to do these kind of numbers and survive and thrive."
SAMET JV: Drag Removal Dated and Funded
- Dilution to 19% signed: Heads of terms are signed; January 5 is the end date for dilution from the current 50:50 JV to a 19% minority stake.
- Loss funding already stopped: Greenply stopped funding losses from Q1; the partner is funding the JV through advances and running the show; the drag on the balance sheet is only a line-item entry with no actual cash outflow from Greenply.
- JV loss in Q2: The JV reported a PAT loss of ₹12.6 crores in Q2 (Greenply share ₹6.3 crores) and ₹24.2 crores in H1 (Greenply share ₹12.1 crores).
- Post-dilution economics: After January 5, there will be no drag; Greenply will earn brand charges on an arm's length basis, which will be a significant other income; dealer-distributors will have another product from the house of Greenply.
- Partner's listing ambition: The partner's vision is to list the company; with majority control, the partner will divert global sales to the India JV, making it very profitable, big, and fit for listing; Greenply will hold 19–20% equity at that point.
- Optionality retained: If the company becomes very profitable and Greenply's balance sheet has free capital, management would want to invest and grow capital, with provision and understanding from the partner's side.
Sanidhya Mittal: "Honestly, to remove the drag, I think the organization has taken a very difficult decision that, we don't want to be 50-50 JV partner, we want to have a minority."
New Initiatives: Flooring, Carbon Credits, TermiVax
- HDF flooring line live: Commercial production commenced in July 2026 and is progressing well; contribution to overall performance expected to begin in H2 FY27 as expansion ramps up.
- Flooring revenue potential: Management estimates ₹2–3 crores per month easily achievable to begin with; a full-year guidance will be provided next year once a base is established.
- Carbon credits allotted: 2,56,688 carbon credits officially allotted under the VCS-validated grouped project "Agroforestry Plantations in the Country by Greenply"; a sample credit has already been sold at USD 15 per credit.
- Monetisation philosophy: Monetisation for Greenply will be very small; the idea is to ensure income goes to the farmer and becomes part of their sustainable income; another tranche of credits is expected through to 2026 end.
- Agroforestry phase 1 complete: First phase rolled out across Gujarat and Nagaland covering over 2,300 hectares, benefiting over 505 farmers; phase 2 committed to expanding to 12,000 hectares, and the program will eventually become national, running in every state around every plant.
- TermiVax launched: A patented nanotechnology-based anti-termite solution introduced in the premium plywood portfolio; underwent a 20-month graveyard test, patent applied for after 12 months, and launched at the 14th month post-test.
- Ecotec Prime launched: Another step to further premiumise the Ecotec range, which continues to grow "very, very sharply" at a sweet price spot.
- Chipboard on the horizon: Approach will be a dependent setup along with MDF; a multi-delight line complementing the MDF line will be super profitable with low total capex; first line expected sometime next year or the year after, depending on operating team bandwidth.
Balance Sheet & Capital Allocation
- Net debt comfortable: Net debt of ₹544 crores and D/E of 0.56x remains well within the guided range of 0.7x–0.75x.
- Sandila plywood capex: New 1.5 crore sq m capacity budgeted at ₹125 crores, funded through a mix of debt and equity, with commercial production expected in Q4 FY28.
- Vadodara and Odisha on track: MDF Vadodara and Odisha plywood projects progressing well, on track for commissioning with committed timelines: MDF in Q2 FY28, plywood in Q4 FY27.
- Timber cost assumption: Management assumes timber prices will remain at current elevated levels with no scope for further increase; any gain would be an additional add to margin, and margins committed in both MDF and plywood consider existing timber costs.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Plywood volume growth | More than 10% annually | Ongoing, post-Odisha ramp-up |
| Plywood EBITDA margin | Sustainably 10%+; 11–12% or higher achievable | Once quarterly revenue crosses ₹600 crores |
| MDF full-year volume growth | Approximately 20% | FY27 |
| MDF core EBITDA margin | 15–16% range | FY27 |
| MDF EBITDA per CBM | Maintain above ₹5,000 | Ongoing |
| MDF quarterly volume | 63,000 CBM per quarter | Q3 and Q4 FY27 |
| Odisha plywood plant commissioning | On track | Q4 FY27 |
| Sandila plywood expansion commissioning | Commercial production | Q4 FY28 |
| Vadodara MDF plant commissioning | On track | Q2 FY28 |
| SAMET JV dilution to 19% | No further drag; brand charges commence | January 5 |
| Unorganised MDF player shakeout | Some players shut down | Next 6–12 months |
| Net D/E | Within 0.7x–0.75x | Ongoing |
| Agroforestry program expansion | 12,000 hectares across Gujarat and Nagaland | Phase 2 |
Key Metrics
| Metric | Q2 FY27 |
|---|---|
| Consolidated revenue | ₹799.7 crores, +16.1% YoY |
| Consolidated core EBITDA | ₹89.2 crores, margin of 11.2%, +300 bps YoY |
| Consolidated revenue (H1 FY27) | ₹1,524.6 crores, +18.2% YoY |
| Consolidated core EBITDA (H1 FY27) | ₹167.5 crores, margin of 11%, +180 bps YoY |
| Plywood segment revenue | ₹625.7 crores, +15.5% YoY value growth |
| Plywood volume growth | 6.1% YoY |
| Plywood realisation | ₹264 per square meter |
| Plywood core EBITDA margin | 10.05%, +180 bps YoY and +160 bps QoQ |
| MDF segment revenue | ₹173.9 crores, +18.4% YoY |
| MDF volume | 54,605 CBM, +16.1% YoY |
| MDF realisation | ₹31,816 per CBM, declined due to rollback of price hikes |
| MDF EBITDA margin | 15.2% |
| Furniture fittings JV sales | ₹14.08 crores |
| Furniture fittings JV PAT loss | ₹12.6 crores, Greenply share of loss ₹6.3 crores |
| Consolidated net debt | ₹544 crores, debt-to-equity ratio of 0.56x |
| Proposed Sandila plywood capacity expansion | 1.5 crore square meters, capex of ₹125 crores, commercial production expected Q4 FY28 |
| Total plywood capacity starting Q4 FY28 | 8.13 crore MSM |
| Carbon credits allotted | 2,56,688 under VCS-validated agroforestry program |
| MDF full-year volume growth guidance | Approximately 20%, with core EBITDA margins of 15% to 16% |
| Plywood full-year volume growth guidance | More than 10% |
| MDF EBITDA per CBM | Above ₹5,000 expected going forward |
| SAMET JV dilution | 19% stake from 5th of January, no further funding of losses from Q1 |