Key Takeaways
- Volume dips, but cost levers fire: Net sales fell ~3% QoQ on monsoon-driven dispatch weakness, yet EBITDA rose 11% QoQ as freight and fuel costs eased, lifting per-ton profitability.
- Panna debottleneck is the near-term margin story: The clinker line is now ramped from 8,000 to 10,000 TPD, with regular production next quarter; further savings from AFR, WHR and normalized output are still to come.
- Price hikes landed, but sustainability is unproven: A 3–4% QoQ price increase took hold early in Q3, yet festivals, elections and a potential Delhi construction ban threaten to disrupt the demand needed to hold it.
- White cement/putty margins are under competitive siege: Putty volumes grew in line with the ~10% market, but paint companies’ aggression forced a ~5% sequential realization drop, and management may have to match further discounts.
- What to watch next quarter: Whether the Q3 price increase survives the full quarter, the pace of the promised ~₹50/ton sequential cost savings, and any Board decision on the next expansion pathway.
Panna Debottleneck & Cost Levers
- Clinker ramp-up in motion: The debottleneck from 8,000 to 10,000 TPD is complete and under trial; regular production begins next quarter, taking Panna to 0.4 cr tons capacity with utilization already at 75%.
- Three savings levers still loading: Normalizing clinker output to the full 10,000, starting AFR usage (not yet used at Panna), and commissioning the Waste Heat Recovery plant will deliver further cost-down, with WHR’s full benefit hitting in Q3/Q4.
- Freight cost fell on a mix of structural and one-off factors: A 15% railway off-season discount (withdrawn 1 October), lead distance reduction after Panna commissioning, and some marginal clinker/slag arrangement benefit all helped; the rail discount reversal alone adds ~₹20–25/ton back in Q3.
- Maintenance spend front-loaded: Q2 carried ~₹30–35 cr of additional maintenance, of which ₹15–20 cr was one-off; most scheduled work is done in H1, so Q3 and Q4 will see lower maintenance costs.
- Fuel cost trending down: Q2 fuel cost was ₹1.90; Q3 is expected at ₹1.80–1.85, driving a ~₹100/ton reduction in power and fuel cost sequentially.
- Sequential cost savings quantified: Management expects ~₹50/ton of cost savings in Q3, with a similar amount in Q4.
Saraogi: "there is a continuous -- when you start a plant, there are some additional costs, but that is ramp-up is still going on at the plant level like we are ramping up the clinker production from 8,000 to 10,000. So once all this gets normalized, there would be further savings that we see a potential and we are able to use -- presently, we are not using AFR at Panna."
Pricing & Demand Outlook
- Q3 price increase is real but young: A 3–4% average price increase versus Q2 has been in place for roughly 40 days; management stressed that the remaining 50 days, which include festivals and state elections, will determine whether it holds.
- November demand faces a double headwind: Festivals plus elections in Madhya Pradesh and Rajasthan are expected to cause a dip; management expects a bounce-back in December.
- Winter and Delhi construction ban add uncertainty: Winters typically soften northern markets, and a stricter construction ban in New Delhi could reduce volumes, though management frames this as a timing shift rather than lost demand.
- Lok Sabha elections may slow new project approvals: Ongoing projects are unaffected, but new projects requiring approvals could be delayed until after elections; the vote-on-account budget in February means the real budget proposal arrives only in June/July.
- Blended realization detail was not provided: When asked for a pan-India blended price increase number, management cited trade/non-trade mix variations and pending orders without quantifying a blended figure.
Saraogi: "if this price increase which has taken place sustains the whole quarter, we — I mean we have seen only around 40 days in the quarter so far. So, we have to see the remaining 50 days how the pricing, there's a festival, which will have some impact on the business."
White Cement & Putty: Growth vs Margin
- Volume growth intact, realization under pressure: White cement/putty volumes grew in line with the ~10% putty market growth, but realization dropped ~5% sequentially as paint companies drove aggressive competition in putty.
- Margins at a floor, but not necessarily the floor: Management believes putty pricing has reached an optimal level and should not see a major further drop, yet acknowledged that if paint companies offer additional discounts, JK Cement will have to match the market.
- Mix is the balancing tool: Lower putty pricing dragged white cement revenue; management is managing profitability through product mix adjustments.
Saraogi: "we feel that it has come to its optimal level. I think there should not be any major drop in the pricing, but still, we have to see how the paint companies because they are very aggressive on putty. So how they behave and whether they give further additional discounts. And then if it is so, then we will definitely have to match with the market."
Expansion & Capital Allocation
- Panna is the probable next move, but no Board decision yet: Management declined to commit, but when pressed on Panna versus Toshali for the next expansion, indicated that “in all probabilities… Panna could be the first option,” citing the existing mining lease advantage.
- Toshali acquisition waits on a mining lease: The agreement is conditional on allotment of a mining lease, which remains under consideration with no timeline; only after allotment will the formal agreement be executed and expansion strategy at the site be developed.
- Acro integration nearing completion: The final instalment to the Acro promoter is due in December, after which JK Maxx will acquire 100% equity and the merger of JK Acro with JK Maxx will be initiated.
- Capex is peaking and then declining: This year’s target is ₹1,400 crores; next year’s drops to ₹700 crores. Net debt has already peaked at ₹3,036 crores and should not increase further, with small borrowings for Ujjain and Prayagraj offset by repayments.
- Capacity utilization target set: FY25 capacity should reach 2.4 crore tons, with 85% clinker utilization achievable.
Saraogi: "See again, you also know the business. Why do you want to put some words in my mouth and I say, no, this is what -- I mean see again, it's a natural thing. At this stage, for me to comment anything which the Board has not decided yet or taken taking a call will not. But definitely, in all probabilities, as you say -- I mean there should -- it could be because, again, new mining lease, you think Panna could be the first option."
UAE & Other Businesses
- UAE volumes surged on one-off factors: A significant volume improvement came from market normalization, easing container availability, and a one-off 40,000-ton shipment to Australia; this level is explicitly not sustainable.
- UAE profitability turning: Operations are improving due to easing fuel prices and container freight rates, with better performance expected going forward.
- Paints business targeting breakeven exit rate: FY24 turnover target is ₹150–200 crores (internal target ₹175–200 crores), with H2 expected better than H1; management sees a possible breakeven or positive EBITDA exit rate by the end of next year, not as a full-year average.
- No import duty risk flagged on UAE clinker: Management stated that no clinker except white clinker comes from UAE to India, and they have not heard of any import duty being considered.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Panna regular production | Debottlenecked clinker line moves from trial to regular output | Q3 FY24 |
| Waste Heat Recovery commissioning | 18 MW WHR plant at Karnataka | Within Q3 FY24 |
| Sequential cost savings | ~₹50/ton reduction in Q3; similar amount in Q4 | Q3 and Q4 FY24 |
| Fuel cost | ₹1.80–1.85, not higher than Q2’s ₹1.90 | Q3 FY24 |
| Capex | ₹1,400 cr (FY24), then ₹700 cr (FY25) | FY24 and FY25 |
| Net debt | Already peaked at ₹3,036 cr; should not increase further | Ongoing |
| Paints turnover | ₹150–200 cr (internal target ₹175–200 cr) | FY24 |
| Paints breakeven | Breakeven or positive EBITDA as an exit rate | By exit of next year |
| Acro merger initiation | Final payment in Dec, then 100% acquisition and merger process begins | December onward |
| Capacity | 2.4 cr tons with 85% clinker utilization achievable | FY25 |
Key Metrics
| Metric | Q2 FY24 |
|---|---|
| Revenue from operations | ₹2,571 cr, down 2% QoQ |
| Net sales | ₹2,476 cr, down 3% QoQ and down ~1% YoY |
| EBITDA | ₹447 cr, up 11% QoQ and up 14% YoY |
| EBITDA margin | 18%, vs 15.8% QoQ and 15.2% YoY |
| Profit after tax | ₹179 cr, vs ₹126 cr QoQ |
| EPS | ₹23.10, vs ₹16.03 QoQ |
| Net debt | ₹3,036 cr, net debt to EBITDA 2.08x and net debt to equity 0.63x |
| Gray cement production growth | +22% YoY |
| Combined operations growth | +22% YoY |
| Gray cement clinker capacity | ~1.5 cr tons |
| Panna plus Hamirpur utilization | 75% |
| Lead distance | 418 km |
| Fuel cost per kcal | ₹1.90, vs ₹2.4 in Q2 last year; Q3 expected ₹1.80–₹1.85 |
| Rail mix | 11% of dispatches, vs 14% in Q1 |
| Paints turnover (H1 FY24) | ₹70 cr |
| Paints EBITDA (H1 FY24) | loss of ~₹7 cr |
| Paints FY24 turnover target | ₹150–₹200 cr |
| UAE volumes | 193,000 tons, vs 121,000 tons QoQ |
| Incentive booked in P&L | ₹69 cr, out of ~₹250 cr annual |
| Maintenance cost (additional) | ₹30–₹35 cr total, of which ₹15–₹20 cr one-off |