Key Takeaways
- Demand steady, pricing finally stirring: Demand remains good, and after quarters of stagnation, prices are beginning to inch upward, setting up a modestly better Q4 margin outlook.
- Costs have peaked: Fuel cost per Kcal rose sequentially to ₹257 in Q3 but management expects a flattish Q4 and a taper from April, removing a major margin headwind.
- Internal levers target ₹300/ton in 18–24 months: Management is chasing a ₹1,000/ton EBITDA ambition, with ~₹200 from top-line, ~₹50 from manufacturing, and ~₹50–75 from supply chain, though granular plans were not fully shared.
- Volume growth ambition of 12–15% next year: The target is entirely self-sufficient, with no dependence on clinker purchases, supported by the ramp-up of the new grinding unit and broader capacity utilization above 85%.
- What to watch next quarter: Whether the promised price uptick materializes and flows through to margins, the pace of fuel cost tapering from April, and any concrete timeline on the next phase of capacity expansion.
Pricing & Margin Trajectory
- Pricing inflection: After several quarters where good demand failed to translate into price increases, management now sees prices moving upward, albeit not dramatically. JK Lakshmi will attempt further increases based on its own demand-supply position.
- Q4 margin outlook: Expected to be a little better than Q3, driven by the price improvement, internal efficiency drives, and higher capacity utilization (85%+) diluting fixed costs.
- Geo mix before trade mix: The first efficiency lever is optimizing the geographic sales mix, because margin gaps between trade and non-trade vary widely by region. In the North, the gap is ₹800–₹1,000 per day, while in the East and West it is much narrower, so non-trade in one geography can beat trade in another.
- Price gap with peers: The gap has reduced significantly in the West and East, but progress in the North has not been as great and needs further work.
- Trade share ambition: Management aims to push trade share beyond 60% in the next two quarters, but only after geo mix optimization, which remains the first priority.
Management: "Prices will inch up little bit this quarter and in coming quarters and we will try to attempt the price increase and I am talking about only JK Lakshmi Cement not talking about industry what they are going to do, but based on the demand supply situation and our position we will try to take it."
Cost Structure & Fuel
- Fuel cost peak: Q3 Kcal cost was ₹257, up from ₹230 in Q2. Management stated costs have peaked and Q4 is expected to be flattish at the same level.
- Taper from April: High-cost inventory will carry through Q4, but fuel costs are expected to start tapering down from April onwards. Q1 FY24 will see a marginal reduction, but not a 20% drop to the ₹2 level.
- Cost base normalization: The sequential increase in overall cost per unit from ~₹2.30 to ~₹2.52 was driven by the same fuel dynamic plus higher other expenses in Q3 (lower ad spend had depressed Q2). The normative run rate on other expenses is expected to continue in Q4. The normative run rate on other expenses is expected to continue in Q4.
- Renewable power in East: The Eastern operations have achieved an 80% renewable power mix, allowing the captive power plant there to be idled. A decision on its sale is deferred: it is "too early" and the asset may be repurposed for future expansion plans.
Internal Efficiency Levers & the ₹1,000/ton Target
- The ambition: Management is targeting ₹1,000 per ton EBITDA, with the gap to leaders diminishing through internal work rather than relying on price. The plan breaks down into ~₹200 from top-line initiatives, ~₹50 from manufacturing efficiencies, and ~₹50–75 from supply chain and outbound logistics, to be achieved over 18–24 months.
- Granular plans exist but were not shared: Management confirmed that detailed, element-level operational plans exist for each lever, including where growth is needed and how long implementation will take, but only broad heads were disclosed on the call.
- Lead distance improvement: Outbound logistics efficiency is already visible: lead distance improved to 396 km in Q3 from 401 km in the prior quarter.
- Trade/non-trade discipline: Management is reasonably confident that intermingling of trade and non-trade volumes is not happening at their end, supported by technology and systems.
Management: "If you really look at without taking price into consideration the EBITDA gap between JK Lakshmi Cement and the leaders is diminishing and dwindling and that is coming about the fact that we are working internally on our levers and we have decided that this is going to add value."
Volume Growth & Capacity Expansion
- FY24 volume target: Management is targeting 12% to 15% cement volume growth next year, entirely self-sufficient without any dependence on clinker purchases. The Amethi unit can be supplemented from the company's own clinkerization.
- Grinding unit ramp-up: The new grinding unit commissioned during the monsoon (July–August) averaged 25,000–30,000 tons per month initially and is now picking up to over 50,000 tons per month from Q4 onward.
- Udaipur expansion: The March 2024 deadline stands, but management cautioned it may spill over into the first quarter of FY25.
- Next growth phase: The plan is to reach 2.5 crore tons by March 2024 via the UCWL expansion, then 3 crore tons by 2030 through Durg, Nagaur, and Kutch (combined ~1.2 crore tons). The priority order between Durg and Nagaur depends on external factors: a railway siding at Durg (expected in the next one-and-a-half years) versus progress on mining approvals and land at Nagaur.
- Capital allocation decision: A decision on the next expansion phase is expected sometime in the next financial year, subject to external approvals.
- Limestone security: The Sirohi lease is due for renewal in 2030. Fallback options include Udaipur limestone and Nagaur (expected to be ready by then), and management is confident of renewal.
Value-Added Products & Non-Cement Business
- RMC and AAC momentum: The RMC business is progressing very well, with capacity expanding and quarterly volume reaching 1.35 lakh cubic meters. AAC block volume hit 1.36 lakh cubic meters in Q3, and the company recently acquired and started production at an AAC plant in Aligarh, UP.
- VAP margin improvement: Value-added products margin improved to 7% in Q3 from 5% in Q2 and 3% in the same quarter last year. Non-cement revenue margin is expected to reach ~7–8% next year.
- Putty plant: A grand-making ceremony was held for a putty plant at Alwar, Rajasthan, which is expected to be operational in 6 to 9 months. Going forward, the focus for VAP will be AAC and RMC.
- Blended cement target: Management is targeting close to 75% blended cement, up from the current 66–67%.
Capital Allocation & Corporate Structure
- FY24 capex: Approximately ₹700 crore on a consolidated basis, including the remaining part of the ongoing project and JK Lakshmi effect. Q4 will see another ₹150–₹200 crore incurred. FY25 capex is expected to be a marginal ₹100–200 crore.
- JK Lakshmi–UCWL merger: The merger is not tax-efficient currently due to ~₹150 crores of MAT credit entitlement at UCWL. It will happen after the MAT credit is exhausted. In the meantime, synergy benefits are already being driven without a paper merger.
- Solar power investment: A 40 MW solar power project under an outsource model (26% equity stake, ~₹22 crores investment) is to be implemented by March 2024, not March 2023.
- Selective disclosure concern: An analyst raised a concern that management discussed a ₹1,000 EBITDA per ton target at an investor meeting without informing exchanges. Management responded that the presentation was uploaded on the website and the bridging gap was also highlighted in the last earnings call.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Q4 margins | A little better than Q3, driven by price improvement and internal efficiencies | Q4 FY23 |
| Q4 capacity utilization | 85% plus | Q4 FY23 |
| Q4 fuel cost | Flattish, same as Q3 (₹257/Kcal) | Q4 FY23 |
| Fuel cost taper | Marginal reduction from April, but not to ₹2 level (not a 20% drop) | Q1 FY24 |
| FY24 cement volume growth | 12–15%, all internal without clinker buying | FY24 |
| FY24 capex | ~₹700 crore consolidated | FY24 |
| FY25 capex | Marginal ₹100–200 crore | FY25 |
| Udaipur expansion | March 2024 deadline, possible spillover to Q1 FY25 | By Q1 FY25 |
| Trade share | Beyond 60% (second priority after geo mix) | Next two quarters |
| Blended cement share | Close to 75% (from 66–67%) | Not specified |
| EBITDA/ton internal levers | ₹300/ton improvement (~₹200 top-line, ~₹50 manufacturing, ~₹50–75 supply chain) | 18–24 months |
| Putty plant (Alwar) | Operational | 6–9 months |
| 40 MW solar project | Implemented (26% equity stake, ~₹22 crores) | By March 2024 |
| Next expansion phase decision | Capital allocation decision, subject to external approvals | Sometime in FY25 |
| JK Lakshmi–UCWL merger | After exhausting ~₹150 crores MAT credit | No date |
Key Metrics
| Metric | Q3 FY23 |
|---|---|
| Revenue | Not stated in transcript |
| Operating margin | Not stated in transcript |
| Net profit | Not stated in transcript |
| Consolidated cement volume | 26.96 lakh tons, +16% YoY on cement |
| Consolidated total volume (cement + clinker) | 28.78 lakh tons |
| Standalone cement volume | 24.22 lakh tons |
| Standalone clinker volume | 1.82 lakh tons |
| UCWL cement volume | 4.48 lakh tons |
| Consolidated clinker production | 21.86 lakh tons (JK Lakshmi 18.51, UCWL 3.35) |
| Capacity utilization | 77% in Q3, expected 85% plus in Q4 |
| Current cement capacity | ~1.5 crore tons (including outsourced Amethi unit) |
| Volume growth guidance (FY24) | 12% to 15% on cement |
| EBITDA per ton (current run rate) | ₹650 |
| EBITDA per ton improvement target | ~₹300, over 18–24 months; ~₹200 from topline levers, ~₹50 manufacturing, ~₹50–75 supply chain/utilization |
| Kilocal cost | ₹257, up from ₹230 in Q2; expected flattish in Q4 |
| Fuel mix | Coal 37%, petcoke 48% |
| Trade share | 54% |
| Blended cement share | 66% |
| Premium share (overall volume) | ~11% |
| Premium share (trade volume) | ~25% |
| Lead distance | 396 km, improved from 401 km in Q2 |
| Value-added products revenue | ₹116 crore, same as Q2; margin improved to 7% from 5% in Q2 |
| RMC revenue | ₹56 crore |
| AAC block revenue | ₹40 crore |
| RMC volume | 1.35 lakh cubic meter |
| AAC block volume | 1.36 (lakh cubic meter implied) |
| Consolidated net debt | ₹1,225 crore |
| Consolidated total debt | ₹1,875 crore |
| Standalone net debt | ~₹200 crore |
| Consolidated capex incurred (9M FY23) | ~₹700 crore (on the 1,650 crore project) |
| Consolidated capex guidance (FY23) | ~₹750 crore |
| Consolidated capex guidance (FY24) | ~₹750 crore |
| UCWL expansion deadline | March 2024, may spill to Q1 FY25 |
| Capacity target by 2030 | 3 crore tons, adding ~1.2 crore tons across Durg, Nagaur, Kutch |
| Solar power (40 MW) landed cost | ~₹5.50 per unit; project ready by March 2024 |
| Rail share in road-rail mix | ~10% |
| Grinding unit volume (Amethi) | 25,000–30,000 tons/month, expected to exceed 50,000 tons/month |
| Price gap with peers (analyst's math) | ~₹250 in Q3, widened from ₹100–125 in Q2 (per an analyst's math) |