Key Takeaways
- Q1 was a clear miss, but management insists the structure is intact: Revenue and order inflow disappointed across several segments, yet the company calls it a slow start driven by global distractions, not demand destruction, and maintains its aspirational ₹2,000 crore full-year target.
- Tezcatlipoca centrifugal compressors are the standout performer: The product is on track to become the first ₹100 crore order booking from a new product this year, winning big and repeat orders even in a weak quarter.
- A structural European supply chain problem is delaying refrigeration packages: Delays in Howden compressor deliveries from Europe are not denial of orders but a structural issue affecting the entire industry; the company is using Khione compressors in smaller packages to compensate.
- The newly launched Tyche semi-hermetic compressor is the big bet for import substitution: It replaces European imports, will scale from Q2, and is priced competitively, with management targeting 18-20% margins on new products over time.
- What to watch next quarter: Whether the promised Q2 scale-up to ~₹500 crore revenue materializes, whether held-up process gas and refrigeration orders convert, and how quickly Tyche ramps up.
Q1 Performance: What Went Wrong
- Global uncertainty froze order finalization: Tariffs, wars, strikes, and changing political and trade policies disrupted site availability, inspections, and clearances, delaying both order booking and dispatch.
- Process gas compression hit a bottom: Sales and order booking were at their lowest point, with a couple of major orders held up specifically due to political uncertainty. Management believes this segment can only get better going forward.
- Refrigeration packages faced a double hit: Large packages for oil and gas, petroleum complexes, and ammonia terminals suffered from both delayed customer finalizations and structural delays in Howden compressor deliveries from Europe.
- Standard screw compressor sales were muted: Lower offtake from general engineering applications reflected broader industrial caution.
- Systems & Components had a brutal first quarter: The newly acquired subsidiary lost money after completing a hydrocarbon project where the entire liquidated damages amount was booked as cost immediately upon invoicing, though some recovery is possible later.
- Material cost improved 1.7%: A more favorable product mix and in-house manufacturing of select components provided a partial offset.
- Employee expenses rose: A modest salary revision at the start of the year plus new manpower hired to target ₹2,000 crore in sales pushed costs higher.
K. Srinivasan: "I know many of you are disappointed with the results. And I owe it to all of you to explain the results and to assure you that things are not as bad as it"
The European Supply Chain Problem
- The delay is structural, not a one-off: Howden compressor deliveries from Europe are not facing a temporary disruption; European companies are going through a structural re-orientation of their entire supply chain, affecting Kirloskar and its competitors who import from Europe.
- Refrigeration packages bear the brunt: Large packages for the oil and gas sector, petroleum complexes, and ammonia terminals rely on Howden compressors and face delivery delays. Gas packages face a different problem: finalization delays, not delivery delays, because the oil sector is seeing the largest churn globally.
- Khione is the partial workaround: The company is accelerating packages built using its own Khione compressors to compensate for the challenges with larger Howden-based packages going out.
- Full-year targets are not being revised down: Management still targets the numbers set at the beginning of the year and does not expect to be far from them, using Khione in smaller packages to take away some of the uncertainty.
K. Srinivasan: "This has become some kind of a structural issue. It is not a denial as much as a delay."
New Product Engine: Tyche, Tezcatlipoca, and the Import Substitution Thesis
- Tezcatlipoca is the clear Q1 star: The centrifugal compressor is winning big and repeat orders and is expected to cross ₹100 crore in order booking during the year, a first for a new product.
- Tyche semi-hermetic compressor launched and tested: The alpha launch is complete in a small controlled area; scale-up begins in Q2. It is a recip version initially, with semi-hermetic screw and centrifugal variants still a long way off.
- Tyche pricing is aggressive: Management will price it much more competitively compared to European imports, targeting new product margins in the 18-20% range on average over time.
- Lost foam casting plant and Janus motors are enablers: The Nashik casting plant is under trial production to meet intricate casting needs of Tyche; the Janus range of specialty motors at Saswad has been commissioned for Tyche and other specialty applications.
- Systems & Components acquisition opens a new packaging market: The subsidiary packages smaller refrigeration systems using Chinese and Japanese compressors; Kirloskar will gradually replace those with Khione and other in-house compressors to enter a packaging market it does not currently serve.
- ARiA range to be relaunched: The low-cost compressor did not scale as expected; a relaunch with changes in go-to-market approach is planned during the year.
- More launches are coming: Management says the current 4-5 launches are not the end; a lot more are in the pipeline, creating headroom for the 20% CAGR growth target.
K. Srinivasan: "But with all the technology and investments that we have made over the last 5 years, we have not met our own internal aspirational targets in this space. We will try and do better going forward."
Segment Dynamics: Gas, Refrigeration, and the Bottom in Oil & Gas
- Oil and gas has hit the real bottom: Q1 was the trough; the oil part remains uncertain due to global changes, but the gas part is the way out for many economies. Management expects improvement from here.
- CNG packages see huge demand but slow execution: Demand is strong from several geographies as the energy basket shifts to natural gas; packages for biogas and hydrogen are also being finalized. However, the pace of execution is expected to remain low.
- Mother vs. daughter station mix is a structural reality: Oil and gas marketing companies install roughly 80% daughter (booster) stations and only 20% mother stations because geographic coverage mandates are easier to meet with daughter stations. Kirloskar's own sale mix is around 50-50, but management does not expect the industry mix to shift toward mother stations for quite some time.
- Biogas: lots of excitement, few installations: Hundreds of quotes go out weekly and some finalization is happening, but the actual number of gas projects getting installed and commissioned remains very few.
- Hydrogen: the opposite problem: There is a lot of interest, projects, finalization, and even some commissioning, but the use case is still undefined. Only two proven processes exist: diesel refining and hydrogenation for vegetable oil. People have hydrogen available but do not know how to use it.
- Ammonia reciprocating compressors are steady: No big swings in Q1, but expected to improve dramatically with increased sale of Tyche compressors in coming quarters.
- Fertilizer sector disruption: Ammonia terminals have all come in and Kirloskar's compressor refrigeration packages are more or less delivered, with only a few still going out.
Margin, Mix, and the Scale Trade-off
- Management is explicit about the margin vs. scale trade-off: Aggressive margin targeting would slow the scale-up and the pace of indigenization. The company is choosing to invest in growth.
- Margins will stay in an 18-20% band: One quarter may go up to 21-22%, another may stay at 19%, but the range holds for now.
- Product mix target is 80% products within 1-2 years: The company is trying to shift the mix toward a higher proportion of products versus projects.
- Backward integration starts with own use: All investments in new capabilities (motor plant, lost foam casting) begin with meeting Kirloskar's own requirements to improve cost competitiveness and offer something unique, then eventually scale up and supply competitors.
- Net working capital below 12% of sales and cash flow over ₹100 crores: Management points to these as evidence that there were no push sales to inflate Q1 numbers.
K. Srinivasan: "We don't want, see, it is a trade-off. If you do too aggressive margin targeting, then you would ensure that your scale up is slower and then you are able to indigenize much lower."
The Screw Compressor Challenge
- Market share is near zero: Management acknowledges the company is almost insignificant in the screw compressor market, which has two very strong entrenched players.
- No oil-free screw compressor yet: The company is working on a variant quite different from what is available in the Indian market today (water-jacketed or water-based), but has not launched it.
- Strategic moves are planned: Management says it will address the screw market with several strategic moves, and modifications or relaunches are coming up in the screw space.
- Internal targets have not been met: Despite all the technology and investments made over the last five years, the company has not met its own aspirational targets in the screw space.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Q2 revenue | At least near ₹500 crores, ~10% growth over Q2 FY25 | Q2 FY26 |
| Q2 margins | More or less same as Q2 FY25 | Q2 FY26 |
| Full-year revenue | At least 18%+ growth over FY25, very near ₹2,000 crores | FY26 |
| Catch-up to plan | Confident of catching up gradually, improving in Q2, definitely coming to plan | By Q3 FY26 |
| Tezcatlipoca order booking | First ₹100 crore order booking from a new product | During FY26 |
| CAPEX | Complete planned CAPEX of ~₹100 crores | During FY26 |
| Tyche scale-up | Scale up from alpha launch | Q2 FY26 onwards |
| ARiA relaunch | Relaunch with go-to-market changes | During FY26 |
| Product mix | Take product proportion up to 80% | Next 1-2 years |
| Order book normalization | Normalize and then build higher to execute bigger numbers | Next 1-2 quarters |
| Booster + mother compressors | At least 250 units combined | FY26 |
| Margin range | Stay within 18-20% range | Ongoing |
| Revenue CAGR | 20% top-line growth | For quite some time |
Key Metrics
| Metric | Q1 FY26 |
|---|---|
| Revenue | ₹272 cr, almost matching last year's level |
| Total income | ₹282.2 cr, up from ₹279.7 cr in Q1 FY25 |
| Other income | ₹8.2 cr, up from ₹4.44 cr in Q1 FY25 |
| Material cost to sales | 47.2%, improved 1.7 ppt from 48.9% in Q1 FY25 |
| Employee expenses | ₹49 cr, up from ₹43.1 cr in Q1 FY25; includes ~10% wage hike and new hires |
| EBITDA | ₹44.1 cr, margin 15.7% to total income vs 15.6% in Q1 FY25 |
| Profit before tax | ₹36.8 cr, margin 13.1%, up from 12.8% in Q1 FY25 |
| Profit after tax | ₹28.1 cr, margin 10% vs 9.6% in Q1 FY25 |
| Basic EPS | ₹4.33 per share, up from ₹4.15 in Q1 FY25 |
| Compression segment profitability | 19.1%, same as Q1 FY25, directionally in 18%–20% range |
| New order booking | ~₹365 cr |
| Order book | ₹1,725 cr as on 1 July 2025, up from ₹1,625 cr at beginning of year |
| Net working capital | Below 12% of sales, for the first time |
| Cash flow released | Over ₹100 cr during Q1 |
| Planned CAPEX for FY26 | ~₹100 cr |
| FY26 revenue target | ~₹2,000 cr, unchanged; at least 18%+ growth over FY25 |
| FY26 EBITDA margin target | 18%–20% |
| Q2 FY26 revenue guidance | ~₹500 cr, about 10% growth YoY |
| Product vs projects mix in order book | 65:35 in favor of equipment and non-project orders, up from 60:40 last year |
| Revenue from Compression segment | Over 89% of total revenue |
| Tezcatlipoca order booking target FY26 | ₹100 cr, expected to be first new product to reach this milestone |
| CNG compressor units target FY26 | At least 250 plus mother and booster stations combined, up from ~200 last year |
| Imported-compressor-based packages | Below 25% of business, down from ~50% five years ago |