Key Takeaways
- Healthy order book, project margin drag: Order on Hand grew 12.3% to ₹11,755 Mio, but gross margin compressed as low-margin project orders from oil & gas and FGD executed this quarter.
- SupremeServe aftermarket is the margin recovery engine: The BPCL acquisition, mechanical seals business, and FGD install base are all feeding the aftermarket pipeline, which management intends to use to compensate for project margin pressure.
- Nuclear: slow qualification, big backlog visibility: The first indigenously manufactured pump is undergoing a lengthy qualification process, but once cleared, the remaining seven pumps should move faster, with good visibility for 5–10 years.
- Multiple first-time orders signal market access gains: First orders for reciprocating pumps, FGD packages, and firefighting pump sets, plus empanelment with MSEDCL and a long-term Siemens locomotive contract, all point to a broadening addressable market.
- What to watch next quarter: Whether the project business (oil & gas, FGD) bounces back in H2 as expected, the pace of SupremeServe’s climb beyond 20%, and any quantification of the Siemens locomotive contract.
Margin Dynamics
- Gross margin compression has three specific drivers: (1) Project business orders taken 1–2 years ago in a highly competitive oil & gas environment executed this quarter; (2) FGD business carries knowingly tight margins to build an install base for future aftermarket; (3) Strategic orders in new segments (wastewater, higher motor ratings, firefighting) were taken to create references and break entry barriers, with firefighting pumps representing only 20–25% of the assembly, limiting margin potential.
- The FGD margin trade-off is deliberate: FGD is a high-admissive application with high wear and tear, so as plants commission, spare parts and component business starts flowing into SupremeServe.
- The recovery plan does not rely on project margins improving: Management intends to compensate by growing the SupremeServe business (BPCL, mechanical seals, FGD aftermarket) and export business, which carries somewhat better margins than domestic.
- SupremeServe currently sits between 15% and 20% of the mix, held down by the high share of standard domestic and agri business; management wants to take it beyond 20%.
Rajeev Jain: "We have knowingly taken these orders at lower margins so that we have a good install base that will help our SupremeServe business in the future months to come."
Nuclear Business
- The core challenge is first-time indigenous manufacturing: The first pump is being made 100% in India, and every stage of manufacturing is extensive and detailed, involving document approval, testing, and motor supply from BHEL. The testbed at Tarapur being built by NPCIL must synchronize with pump manufacturing, and the first pump requires 500 hours of testing.
- Once qualification clears, the remaining pumps accelerate: After the first pump completes its qualification process, the remaining seven pumps should be much faster and smoother. The Gorakhpur/Haryana site is delayed, adding to the timeline uncertainty.
- Visibility is strong but unquantified: Management sees good visibility for the next 2–3 years and continuing for 5–10 years, expecting some good orders, but declined to quantify numbers for this year or next. Last year, nothing was booked; major ones are planned this year.
- Two nuclear pump sets are on track for supply this year, totaling approximately ₹100 crores.
- A reciprocating pump prototype for nuclear is being made to qualify for future 700 MW power plants, though supply is still some time away and requires a proven tech record first.
- Export potential exists if things go well, given KSB’s capability and know-how. Small Modular Reactors are being studied, with customer visits and discussions happening, but it will take some time.
Rajeev Jain: "And because this is where this pump will be first time made 100% in India, that qualification process till the pumps are tested, finally, it is going to be lengthy. But once it is completed, then the remaining seven pumps should be much faster, much smoother."
SupremeServe & Aftermarket
- Three new pillars are feeding the install base: The BPCL acquisition is now reaping benefits, with most PSUs qualifying KSB as a proprietary supplier for aftermarket of the BPCL installed base; the mechanical seal business sold 10,000 seals and wants to double that; and FGD plants, as they commission, will generate spare parts and component demand.
- The first reciprocating pump order (₹7 crores, from a PSU for oil & gas replacement) sets a precedent for the replacement market in the oil business. Though reciprocating pumps are not KSB’s core area, the BPCL acquisition has given customers confidence in KSB as a reliable partner.
- OEM advantage compounds: Boiler circulation pump repair, supercritical plants, and nuclear aftermarket (mechanical seals, replacement pumps in turbine island) are all contributing to SupremeServe growth.
- The percentage target is directional: Management wants to take SupremeServe beyond 20% and further; the current 15–20% range is diluted by the high mix of standard domestic and agri business.
Rajeev Jain: "Though it is not our core area. But due to the acquisition of BPCL, what is good is that the customers have faith and confidence in us that we could be a reliable partner in terms of quality and delivery."
New Order Sources & Market Access
- Multiple first-time breakthroughs were recorded this quarter: First order for reciprocating pumps, first order for FGD, first order for an FM package firefighting pump set, and indigenized KRT pumps. A letter of empanelment from MSEDCL for solar pumping systems under PM-KUSUM in Maharashtra was also received.
- The Siemens locomotive contract is a decade-long anchor: A long-term agreement for approximately 10 years of pump supply (more than 2,000 units) is being finalized. Pumps have been localized from the parent company and tested in Germany per Siemens requirements. Business is expected to start this year and continue for the next 5–10 years. Discussions with other locomotive manufacturers have also begun.
- MSEDCL empanelment is a foot in the door, not an order: The letter of award gives KSB a quantity share for the whole state, but the next step requires the installer network to collect orders from farmers through the government process.
- Solar business is building state-by-state: KSB participated as a consortium to qualify with a minimum criterion of supplying 1,000 pump sets, partnering with partners in different states. As PTRs are obtained, chances to participate in almost all states improve, with better business expected in 2024 and 2025.
- Export order intake has grown at a 23% CAGR, and the enhanced product basket gives more market access to KSB offices, with somewhat better margins than domestic business.
Product & Capacity Expansion
- Valves business is at a capacity ceiling: The Coimbatore plant is at its limit, and the market is much bigger than the pump market. KSB has added a traded valve segment (butterfly valves), and turnover is growing, but space and capacity constraints exist. The team is evaluating options: adding multi-operation or 5-axis machines in-house, a possible new site, or outsourcing, with measures expected in coming months.
- Green hydrogen is a parent-company advantage: KSB Group is leading globally in green hydrogen, and products are similar to the existing range. A magnetic drive pump for electrolyzers has been localized; some variants (block version) still need localization. All know-how is available from the parent company.
- The green hydrogen opportunity is a 10-year story: Management expects it will be quite substantial in the next 10 years, with 2025 and 2026 marking a beginning rather than a very big number, and future years being more substantial. The first-mover advantage from the parent is significant, but leveraging it locally is the key task.
- Reciprocating pump competence is being built: The company needs to gain competence internally; once experience is gained in oil & gas and nuclear, global opportunities will open up, but the first priority is establishing in the local market.
Rajeev Jain: "I would say that it is a big advantage and how we leverage that locally is very important."
Demand Environment
- Domestic standard business is doing quite well: General industry, building services, and water/wastewater represent approximately 50% of the portfolio and are showing good traction.
- Project business is the soft spot: Petrochemical, oil & gas, FGD, and coal markets are slow. FGD had provided relief in the last couple of years but has also slowed. Management expects a bounce-back in the second half of this year, with the first half likely remaining slow.
- The election year adds uncertainty: Management noted that revenue growth continuation depends on the market, especially given it is an election year, even as the order book position remains quite healthy and new initiatives (solar, mechanical seals, SupremeServe, BPCL acquisition) continue to help growth.
- Export business is a compensating lever: With an enhanced product basket and better margins than domestic, exports are expected to increase going forward, helping offset project business concerns in oil & gas and energy.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Project business recovery | Oil & gas and FGD expected to bounce back | Second half of this year |
| SupremeServe mix | Take beyond 20% from current 15–20% | No date (directionally stated) |
| Mechanical seals volume | Double the 10,000 seals sold | This year |
| Nuclear pump supply | Two pump sets (~₹100 crores) on track | CY24 |
| Siemens locomotive contract | Long-term agreement for ~10 years, >2,000 units; business to start | This year, continuing 5–10 years |
| Solar business | Better market share and orders expected | 2024 and 2025 |
| Valves capacity expansion | Measures to enhance capacity | Coming months |
| Green hydrogen | Beginning of business, not a very big number | 2025 and 2026; more substantial in future years |
| Revenue growth | Continuous growth similar to past two years, subject to election-year market conditions | Coming years |
Key Metrics
| Metric | Q3 FY24 |
|---|---|
| Revenue from operations | ₹22,472 Mio, +23.3% YoY from ₹18,222 Mio |
| Profit | ₹2,749 Mio, growth maintained alongside revenue |
| EPS | ₹58.8 per share, up from ₹51.5 per share |
| ROCE | 23.5% in CY23 |
| Order on hand (excl. nuclear) | ₹11,755 Mio, +12.3% YoY |
| Export revenue | ₹382 cr, 16% of revenue |
| Nuclear order book | ₹1,000 cr+ |
| Nuclear pumps to be supplied in CY24 | 2 pump sets, expected revenue ~₹100 cr total |
| SupremeServe revenue share | 15–20% of total revenue |
| Valves business turnover | ~₹400 cr in CY23 |
| Inventories | ₹564 cr at December end |
| Receivables | ₹497 cr at December end |
| Net financial position | ₹274.6 cr, up from ₹262.3 cr at December '22 |
| KUSUM revenue contribution | ~₹30 cr invoiced in CY23 |
| Mechanical seals sold in aftermarket | 10,000 seals, target to double in the coming year |
| First reciprocating pump order | ₹7 cr, replacement order from a PSU in oil and gas |
| Group captive solar PPA capacity | 6.65 MW, supplying ~1 cr units of green power annually for 25 years |
| Carbon emission reduction (scope 1) | 22% achieved in 2022 |
| Carbon emission reduction (scope 2) | 8% achieved in 2022 |