Key Takeaways
- Flat H1, recovery bet placed on H2: Exports of bimetal strip to Japan dragged sales, while the tractor segment softened domestically; management expects both to recover from December and targets 12% growth for the full year.
- Brake lining aftermarket is the new growth leg: Monthly revenue has ramped from Rs.10 lakhs to Rs.40-45 lakhs, export orders exceed Rs.1 crore per month, and the distributor network is scaling toward 150 outlets within six months.
- Alkop revenue target slips, not dies: The Rs.75 crore milestone was delayed by a tractor and Honeywell (USA) slowdown; management now commits to exceeding it next year, with samples approved and testing underway.
- Margins are structural, not cyclical: The company attributes its 23-25% EBITDA margin (vs. peers' 7-8%) to in-house machine building, low CapEx intensity, and semi-automatic productivity, and vows never to compromise on margins.
- What to watch next quarter: Whether tractor demand actually bounces back in December, the pace of brake lining distributor additions, and any conversion of the 128-part bearing RFQ pipeline into firm orders.
Revenue Drivers & Segment Performance
- Bimetal strip exports: The fall in sales over the last six months was concentrated in bimetal strip exports to Japan; finished product exports remained constant or slightly higher year-on-year.
- Tractor segment: A slowdown in the first 4-5 months of the year affected the bearing division; management expects demand to increase from December onwards.
- Capital goods: Orders are flowing from Cummins, John Deere, Mahindra, Ingersoll, and Mayekawa (Japan), offsetting the auto-side slowdown.
- Brake shoe/liner: Aftermarket revenue has grown from Rs.10 lakhs per month in April to Rs.40-45 lakhs currently, with export orders of more than Rs.1 crore per month now dispatching.
- Alkop division: Enquiries from 5 customers for 38 parts worth Rs.7.50 lakhs per year, plus an Indian business pipeline of Rs.28 crores; samples and commercial terms are approved, with parts under testing.
- Order book: Present order book stands at approximately Rs.250 crores, covering one year from now.
Arun Aradhye: "Doable in the next year, because there was little slow down in the first 3 to 4, 5 months in tractor segment and there as well as Honeywell is concerned you see there was a little slowdown in USA actually, because of that slightly delayed otherwise we would have targeted - as per the target it was to be achieved in this year only, but better luck next time, next year, we will be exceeding that Rs.75 crores."
Brake Lining: The Aftermarket Build-Out
- Go-to-market: The company targets only the aftermarket, not OEMs, and has appointed 30-35 people to expand distribution; the network now exceeds 50 distributors.
- Geographic reach: Present in Dubai, South Africa, Nepal, and Bangladesh, with Sri Lanka launching next month; domestic coverage spans all of India except Jharkhand, Bihar, Gujarat, and Rajasthan.
- Revenue trajectory: Current-year target of Rs.7-8 crores, rising to Rs.16-17 crores next year; at Rs.19 crores annual revenue, margins will match other products.
- Capacity ceiling: At Rs.20 crore revenue, capacity will be 100% utilized; management will consider approaching OEMs only after exhausting aftermarket capacity, and any further CapEx decision waits until after next year.
- Product positioning: The company manufactures only eco-friendly, asbestos-free brake linings.
Arun Aradhye: "We are doing only eco-friendly asbestos free brake lining only. We are not with the manufacturing with asbestos, because we want to be eco-friendly."
Competitive Moat & Margin Structure
- Bearing division oligopoly: Only four major players globally: Menon Bearings (the only Indian company), Federal Mogul, and KSPG (both MNCs). High entry barriers stem from rigorous testing, validation, and long OEM approval timelines.
- Cost advantage: The company builds its own machines in-house, which keeps CapEx requirements, finance costs, and depreciation far lower than competitors. Semi-automatic machines enable work with minimum staffing levels and deliver higher productivity.
- Gross margin: 43% gross profit margin is achieved through competitive pricing layered on a lower cost structure.
- Margin discipline: Management states it will never compromise on margins and will sustain EBITDA or PAT margins at similar levels.
Arun Aradhye: "We will never compromise on our margins as well. So we will keep the margins intact and we will sustain the EBITDA or whatever PAT margins always similar."
Capacity Expansion & CapEx
- Facilities: A 45,000 sq ft building for the bearing division and a 65,000 sq ft building for the aluminium division are approved, with both buildings and machinery to be completed by the end of this financial year.
- Bearing capacity: Capacity will be augmented to 5.5 crore pieces per month by year-end.
- CapEx spend: Rs.30 crores of CapEx across both divisions, expected to complete by year-end.
- Revenue addition: The additional CapEx is expected to increase revenue by Rs.75 crores, with visibility on more than Rs.68 crores of that.
- Medium-term scale: With 25% additional capacity, the company can reach Rs.400 crores within 2-3 years; within 4 years, management believes it can double the current figure.
- Capacity utilization cap: The company will not exceed 80% capacity, deliberately keeping idle capacity for any surge in demand.
Arun Aradhye: "We will not exceed 80% capacity, because we want to keep always idle capacity for any surge of demand anytime."
RFQ Pipeline & New Business Conversion
- Bearing division: RFQs received from 8 new customers (mostly exports) for 128 parts.
- Alkop division: RFQs received from 5 customers for 38 parts.
- Conversion timeline: From RFQ receipt to first purchase order takes 7-9 months, spanning feasibility checks, drawing comparison, design, tooling, sample manufacturing, inspection, 2,000-3,000 hours of engine trials, and sample approval.
- Export bias: The majority of RFQs received, across both bearing and Alkop divisions, have 70% going for exports.
- Near-term start: Some business from new RFQs may start from April onwards, with more expected from July onwards, subject to testing and validation timelines.
Arun Aradhye: "It will take little time. Maybe after March some business will start from April onwards and some business is expected to start from July onwards, because it will take little more time for the testing and validation and approval of samples and that's all."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Full-year revenue growth | 12% growth this year | FY24 |
| Forward revenue growth | 20-22% growth | From FY25 onwards |
| Bearing capacity | Augment to 5.5 crore pieces per month | End of FY24 |
| CapEx completion | Rs.30 crores across bearing and aluminium divisions | End of FY24 |
| Revenue from CapEx | Rs.75 crores additional, with >Rs.68 crores visibility | Post CapEx completion |
| Brake lining revenue | Rs.7-8 crores (FY24); Rs.16-17 crores (FY25) | FY24 and FY25 |
| Brake lining margin breakeven | Margins match other products at Rs.19 crores annual revenue | When revenue reaches Rs.19 crores |
| Brake lining distributors | Reach almost 150 distributors | Within 6 months |
| Alkop revenue | Exceed Rs.75 crores | Next year (FY25) |
| Medium-term revenue | Reach Rs.400 crores | Within 2-3 years |
| EBITDA margin floor | Operate with EBITDA margins of more than 20% | Ongoing |
| Capacity utilization ceiling | Will not exceed 80% | Ongoing |
Key Metrics
| Metric | Q2 FY24 |
|---|---|
| Total income | ₹51.12 cr |
| Total income (H1 FY24) | ₹106.27 cr |
| Gross profit | ₹21.71 cr, 43.30% of total income |
| EBITDA | ₹10.32 cr, 20.58% of total income |
| Profit before tax | ₹8.35 cr, 16.33% of total income |
| Profit after tax | ₹6.30 cr, 12.32% of total income |
| Revenue growth guidance (FY24) | 12% |
| Revenue growth guidance (FY25 onward) | 20% to 22% |
| Order book | ₹250 cr, for 1 year from now |
| Bearing division capacity utilization | 70% to 75% |
| Bearing division capacity | 40 to 4.8 cr pieces per month, augmenting to 5.5 cr pieces by end of FY24 |
| Brake lining H1 FY24 sales | ₹75 lakhs |
| Brake lining FY24 revenue expected | ₹7 cr to ₹8 cr |
| Brake lining FY25 revenue expected | ₹16 cr to ₹17 cr |
| Brake lining aftermarket monthly run-rate | ₹40 lakh to ₹45 lakh, up from ₹10 lakh in April |
| Brake lining export orders received | more than ₹1.5 cr |
| Brake lining distributors | more than 50, target 150 within 6 months |
| Alkop division RFQs received | 5 customers, 38 parts, annual quantity 7.50 lakh numbers, annual business ₹28 cr |
| Bearing division RFQs received | 8 new customers, 128 parts, annual quantity ₹1.15 cr, annual business ₹36 cr |
| CapEx underway | ₹30 cr, expected to generate additional revenue of ₹64 cr to ₹70 cr |
| Debt increase (H1 FY24) | ₹12 cr, earmarked for bearing division CapEx |
| Revenue aspiration (2-3 years) | ₹400 cr |
| Revenue doubling timeline | within 4 years from current level |