Key Takeaways
- Record quarter, then a soft patch: Q1 was the best quarter in company history; Q2 slowed to ~7% YoY growth as tariff confusion and GST uncertainty pushed customer orders from September into October.
- October set to be the highest sales month ever: Management expects October to be the single highest sales month in Menon Bearings' history, signaling that the Q2 softness was a timing shift, not demand destruction.
- Margins compressed to 15.6%, recovery promised: Raw material costs, wage hikes, and new-plant OpEx dragged EBITDA margin below 16% in Q2; management is preparing price-increase charts and expects the pass-through benefit to accrue in Q3.
- Multiple new revenue streams are now live: Allison USA thrust washers shipped, Bajaj Pulsar brake pads started, Alkop parts for John Deere approved, and an Africa brakes deal finalized, all set to contribute from Q3/Q4 onward.
- What to watch next quarter: Whether the October record translates into a sustained Q3, the pace of margin recovery toward the 20% full-year target, and the first billing from the Allison contract in January/February.
Revenue Trajectory & Order Book
- Q2 slowdown was a deferral, not a loss: September was weak because customers waited for GST revision and tariff clarity; those orders shifted into October, which is now tracking as the highest sales month ever.
- FY26 revenue target narrowed: Management guided to ₹285-290 crores for FY26, down from an earlier analyst-implied ₹300 crore figure, citing the September softness but confidence in Q3 and Q4 recovery.
- FY27 growth anchored on secured business: 18-20% year-on-year growth next year is based on business already secured, including Allison, Alkop parts, Bajaj brakes, and the Canada opportunity.
- Export share rising: Exports are targeted to reach 35% of revenue by end of FY26 and 40% by FY27, driven by US and new geography wins.
- Order book value undisclosed: When asked for the current order book value, management declined to provide a specific number, pointing instead to the revenue target.
Aditya Menon: "Second quarter, little bit uncertainty, even in order book. Before, we had a little more positive forecast, but even all bigger companies, they also are in uncertainty, right?"
Margin Dynamics & Recovery
- Q2 margin breakdown: EBITDA margin fell to less than 16% because input material costs (copper, tin, aluminium) rose, consumables and electricity costs increased, salary/wages went up on DA and increments, and new CapEx of ~₹30 crores added OpEx before full utilization.
- Pass-through mechanism: Management is preparing charts comparing Q1 average input rates to Q2 increases; customers will reimburse via price rises under a pre-decided formula, with the benefit accruing in Q3.
- Price increase quantum: The reimbursement exercise, to be completed by end of this month, is expected to yield a benefit of about 5-6%.
- New-plant drag temporary: The fruits of the ₹30 crore CapEx will be enjoyed by end of Q4, once the new plant reaches higher utilization and the basic electricity charge burden normalizes.
- Full-year margin guidance: Management guided 18-20% EBITDA margin for FY26, with Q3 and Q4 carrying the recovery; FY27 margin is guided at more than 20%, with management's own calculation at 22%.
- Tariff scenario pushback: Per an analyst's math, management was asked if a US tariff reduction below 20% would put them on track for 20%+ margins; management did not confirm that scenario, instead stating they will reach more than 20% EBITDA margins "irrespective of whatever trade deal happens."
Arun Aradhye: "We'll be preparing the charts as to what were the average rates of these items during the first quarter and how much they have increased in the second quarter and whatever increase is there on first quarter, that increase is being given by rise in the prices by the customer. And that benefit will accrue during this quarter, so that our EBITDA margins will go up drastically."
New Business & Customer Wins
- Allison USA thrust washers: Commercial production started; capacity increased by 7 lakh pieces per month; first two consignments shipped in September; billing starts January/February when batches reach the US.
- Bajaj Pulsar brake pads: Entered two-wheeler brake pads; currently supplying ~2 lakh pieces per month; targeting 5-6 lakh pieces by year-end; Bajaj gave an additional model part because they liked the quality.
- Alkop parts for John Deere: More than 51 parts tested and samples approved; 63 parts total to be productionized by end of Q3; supplies starting Q3/Q4.
- EV component entry: Entered the EV segment through Eaton parts supply to Porsche, expected to contribute 8-10% of Alkop revenue by FY27.
- Africa brakes deal: Brake lining deal worth ~₹50 lakhs per month starting November; 100% advance payment required due to past bad-debt experience in 1994-96.
- Canada opportunity: A Canadian company has approved pricing and quality; meeting in April in USA to finalize a deal worth ₹50-60 crores per year, driven by tariff-rerouting strategies of US companies.
- Competitor aftermarket proposal: A global bearings competitor wants Menon to handle its entire USA aftermarket, worth ~₹8-10 crores yearly from an ₹80 crore total; management is evaluating whether to proceed.
Aditya Menon: "Even when we ramp up, we want to make sure because they are replacing us with the existing customer of theirs, because of our quality and better pricing. So we also make sure that we are doing sustainable growth, right? Just because 6 lakh order, we are not doing 6 lakh. If there is an issue of quality, so they will also have doubts in us."
Export Markets & Tariff Strategy
- US tariff exposure is limited: Most US customers are on Ex Works or FOB Mumbai terms, so Menon is not directly affected; for Allison where duty is delivery-paid, the 50% tariff is partially offset by a 10-12% foreign trade zone exemption, leaving a net burden of ~10-12%.
- October US exports at record: October exports to the USA were the highest in company history and continuing, with no issues expected despite tariff slowdown concerns.
- Tariff negotiation approach: Where tariffs do apply, management is in active discussions with customers to share the burden, noting that customers understand the situation and that margins are thin relative to the tariff quantum.
- Canada as a tariff hedge: Many US companies with Canadian manufacturing are rerouting supply chains via Canada and Mexico to mitigate tariff risk; Menon is positioned to capture this shift.
- Africa entry with caution: Starting small at ₹50 lakhs per month with 100% advance payment, a condition driven by a ₹30-40 lakh bad-debt loss in 1994-96 that could not be recovered through international courts.
Aditya Menon: "If someone is adding 50% tariff, customer hardly gives us 18%, 20% margin. So if someone is giving 50% tariff, so to what extent we are in negotiations, to what extent they are going to bear the tariff, like reimburse us with the tariff."
Segment & Capacity Updates
| Segment | Status | Key Detail |
|---|---|---|
| Bi-Metal | ▲ Major contributor | Capacity rising from 486 to 5.3 crore units; Allison and thrust washers driving growth |
| Alkop | ▲ Healthy growth | Export orders strong; 63 parts productionizing by Q3; capacity can double from 1,440 to 2,880 tonnes anytime |
| Brakes | ▬ Stable, ramping | Bajaj Pulsar started; railways registered, awaiting dynamometer; FY26 contribution ₹13-15 crores |
| Thrust Washers | ▲ New, margin-accretive | Similar margins to Bi-Metal; first Allison shipments done; marketing for 2027-2028 customers underway |
- Brakes dynamometer delay: Railways registration is complete, but the dynamometer (cost ₹3-3.5 crores) is delayed due to manufacturer issues; OEM business will also come only after installation, expected in Q3 or Q4.
- Bajaj brakes ramp-up philosophy: Management is deliberately pacing growth to ensure zero PPM on a safety product; currently at 2 lakh pieces, targeting 5-6 lakh by year-end, with eventual monthly business of ₹1.30-1.50 crores.
- Solar investment: 570 KW already implemented; 2.5 MW rooftop solar to be completed within a couple of months, saving ~₹2 crores per year and helping customers meet carbon-footprint goals for supplier selection and better pricing.
Capital Allocation & Investment
- CapEx largely complete: Most planned CapEx of ₹25-30 crores is done; only part-specific machinery will be added when orders come. No significant CapEx needed till 2027 and the first two quarters of 2028.
- Revenue targets achievable with current capacity: Management confirmed that revenue targets across all three divisions can be met with existing CapEx.
- Tractor components pipeline: Components worth ₹55 crores developed for John Deere, Escorts (Kubota JV), and International Tractors (TMTL); 50% approval already received for a mixed batch covering India, Africa, Southeast Asia, and Europe.
- Bajaj additional model investment under evaluation: Bajaj offered another model part due to quality satisfaction; management is deciding whether to invest in the additional capacity required.
Arun Aradhye: "Apart from that, from one of the global companies into Menon -- into bearings, we have received as many as more than 800 samples for development from USA. We're skeptical about that. They want that entire aftermarket should be looked after by us so far as USA is concerned."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| FY26 revenue | ₹285-290 crores | FY26 full year |
| FY26 EBITDA margin | 18-20% | FY26 full year |
| FY27 EBITDA margin | More than 20% (management calculation 22%) | FY27 full year |
| FY27 revenue growth | 18-20% year-on-year | FY27 |
| Export share | 35% of revenue | By end of FY26 |
| Export share | 40% of revenue | By FY27 |
| EV business contribution | 8-10% of Alkop revenue | By FY27 |
| Bajaj brakes volume | 5-6 lakh pieces per month | By end of FY26 |
| Alkop 63 parts productionization | All 63 parts productionized | By end of Q3 FY26 |
| Allison billing start | Revenue impact visible | January/February 2026 |
| Canada deal finalization | Deal worth ₹50-60 crores/year | By end of April 2026 |
| Price increase benefit | ~5-6% reimbursement from customers | Exercise completed by end of this month; benefit in Q3 |
| No significant CapEx needed | Current capacity sufficient for targets | Till 2027 and first 2 quarters of 2028 |
Key Metrics
| Metric | Q2 FY26 |
|---|---|
| Revenue | ₹63.85 crore, ~7% YoY growth |
| EBITDA | ₹11.1 crore |
| PAT | ₹6.8 crore |
| EBITDA margin (Q2) | 15.6%, impacted by higher raw material costs, consumables, wages, and electricity rates |
| EBITDA margin (H1 FY26) | 18.8% |
| PAT margin (H1 FY26) | 11.6% |
| H1 FY26 PAT growth | 18% over same period last year |
| FY26 revenue guidance | ₹285 crore to ₹290 crore, consolidated |
| FY26 EBITDA margin guidance | 19% to 20% for the full year |
| FY27 revenue growth target | 18% to 20% year-on-year |
| FY27 EBITDA margin guidance | 20% to 21%, conservative estimate; management forecast is 22% |
| Exports as share of revenue | ~30% currently, target 35% by end of FY26, projected 35% to 40% by FY27 |
| Capacity utilization (all segments) | 70% to 75% |
| Order book (current year) | ₹290 crore |
| Order book (next year) | ₹350 crore |
| Brakes segment FY26 revenue guidance | ₹13 crore to ₹14 crore |
| EV business contribution to Alkop revenue by FY27 | 8% to 10% |