Key Takeaways
- 20% growth commitment, brakes live: Management guided 20%+ consolidated revenue growth for FY24, anchored on a >₹100 crore RFQ pipeline and an 80% conversion ratio; commercial production of brakes began in April 2023.
- Brakes open a new, lower-margin leg: The brakes aftermarket is a ~₹900 crore consumable opportunity, but its 18–19% EBITDA margin will dilute the blended profile, a drag management hopes volume and value-addition elsewhere can offset.
- Export headwinds concentrated in Japan: Bi-metal export value fell 13% as Japanese customers slowed; US business kept growing, and management expects the pressure to ease from Q2 FY24.
- Capex cycle funded from the balance sheet: A ₹30 crore, three-year programme (60% aluminium, 40% bimetal) will be met mainly through internal accruals, with full capacity in place by end-FY25 and a ~₹400 crore revenue potential at full utilisation.
- What to watch next quarter: Whether the Q2 export recovery materialises, the pace of brakes aftermarket offtake against the ₹25–27 crore FY24 target, and any margin dilution as the lower-margin brakes mix builds.
Brakes: The New Growth Vector
- Product and go-to-market: Brakes are a fast-moving consumable replaced every 15,000–40,000 km, sold first into the independent aftermarket through 50+ registered distributors, then state transport undertakings, private fleets, OEMs, and railways last.
- Revenue ambition: Management targets ₹25–27 crores in FY24, acknowledging the number could land a little lower because commercial production only started in April and the market needs roughly six months to develop.
- Longer-term aspiration: A three-year ambition of ₹100 crores was floated as an estimate, not a commitment; railways entry is deliberately deferred to avoid government-related complexity.
- Margin profile: Brakes carry an expected 18–19% EBITDA margin, lower than the core bearing and aluminium businesses; management argues growth and better value-addition in those segments will compensate for the dilution.
- Capacity and capex: The ₹8 crore capex for brakes is complete; additional lines cost only ₹1.5–2 crores each, making OEM scale-up capital-light once aftermarket traction is proven.
Aradhye: “It is nowhere related to OEMs. The market segment is totally different. Aftermarket is around INR900 crores. Because it's a consumable item... it has to be replaced after every 40,000 kilometers or in hilly area or in mining area, it has to be replaced after every 15,000 to 20,000 to 25,000. So, it's a fast consumable item.”
Core Business: Growth Engine & Margin Levers
- FY23 revenue composition: Total revenue grew 11% YoY to ₹216.9 crores, led by domestic strength in both bi-metal and Alkop segments; exports declined 2.6%, with bi-metal exports down 13% in value, concentrated in Japan.
- Alkop value-add story: Alkop revenue rose ~29% on only ~6% volume growth, driven by higher-value products and a pass-through of rising metal prices, signalling improving mix and pricing power.
- Gross margin swing: Q4 FY23 gross margin jumped 627 bps QoQ to 46.6%, attributed to higher-value products, export mix, and operational efficiency; full-year gross margin still declined to 43.4% from 45.5% in FY22.
- EBITDA margin trajectory: Margins have compressed from 25–26% in FY18–19 to ~23% in FY23; management expects not only to sustain current levels but to increase them, with brakes dilution offset by aluminium and bearing growth.
- Customer and capacity: No single customer exceeds 10% of revenue; bi-metal utilisation at ~68%, Alkop at ~70%, leaving headroom to absorb the guided 20% growth without immediate new capex.
- Tractor tailwind: Indian tractor production crossed 0.1 crore units for the first time in FY23, with sales up 12% YoY, supported by MSP increases and above-normal monsoon; the recent slowdown in the segment is now normalising.
Aradhye: “What we feel that we will not only sustain the margins, but it is likely to increase to some extent.”
Export Recovery & the India-as-Hub Thesis
- Japan-led slowdown: The export degrowth is specific to bi-metal bearings in Japan, where major customers faced an industry slowdown; other export markets, including the US, continued to grow.
- Recovery timeline: Management stated the export slowdown will ease from Q2 FY24, a view informed by ongoing customer audits and the RFQ pipeline rather than a confirmed order book recovery.
- India-as-hub narrative: Foreign delegations from the US and Korea visited both plants in Q4, impressed by quality and delivery; management sees India becoming a future global hub for bearing and aluminium components, analogous to the China-One and Europe-One sourcing policies.
- RFQ-to-revenue cycle: The process from RFQ receipt to commercial production takes 9–10 months, involving testing, validation, audits, sample preparation, and commercial finalisation, because parts go directly into the engine.
Aradhye: “Just like China-One policy, Europe-One policy is in existence, what we see. So, many more people are approaching us... So, what I feel, so far as our country is concerned, so globally, India can be a future hub for all these companies.”
Capex Programme & Capacity Build-Out
- Three-year, ₹30 crore plan: 60% allocated to a new ~65,000 sq ft aluminium infrastructure factory, 40% to a ~40,000 sq ft bimetal facility; full capacity will be in place by end-FY25.
- Funding and discipline: Funded mainly through internal accruals with nominal bank funding possible; management will not commit to additional capex unless business is visible on the horizon, so the build-out is tied to the pipeline.
- Revenue potential at full utilisation: Including existing capacities, the ₹30 crore addition, and brakes, revenue could reach ~₹400 crores at 100% utilisation, achievable by FY25–26 per management.
- Longer-term aspiration: When asked about a ₹1,000 crore path, management deflected, saying “we don’t know the future,” but volunteered a ₹500 crore aspiration while emphasising bottom-line robustness over topline scale.
Aradhye: “So unless the business is on the horizon, we will not venture into the additional capex. We make an additional capex and planning thereof and then we see the business on the horizon and then we go on putting up the infrastructure in place. So it will not go waste and we will not have to wait and wait for the business thereafter.”
RFQ Pipeline & the 20% Growth Conviction
- Pipeline size and conversion: Over ₹100 crores of RFQs are in the pipeline with an 80% conversion ratio; management is “100% sure” of 20% growth, with brakes providing potential upside beyond that.
- Non-auto diversification: Additional capex in bi-metal and Alkop is partly aimed at increasing the share of revenue from the non-auto sector, reducing cyclicality tied to tractor and commercial vehicle demand.
- Monsoon risk addressed: Despite external worries on monsoon and tractor demand, management cited local panchang predictions of adequate and appropriate monsoon, and pointed to samples already sent and RFQs in hand as the basis for confidence.
- Dividend signal: The board may distribute 35–40% of profit as dividend this year; the lower payout ratio last year was attributed entirely to board discretion.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Consolidated revenue growth | 20%+ YoY | FY24 |
| Bi-metal segment growth | 20%+ YoY | FY24 |
| Brakes revenue | ₹25 crores (may be a little less) | FY24 |
| Brakes EBITDA margin | 18–19% | FY24 (implied) |
| Export slowdown easing | Recovery begins | From Q2 FY24 |
| Capex programme completion | ₹30 crores, full capacity in place | End-FY25 |
| Revenue potential at full utilisation | ~₹400 crores (existing + new capex + brakes) | FY25–26 |
| Dividend payout | 35–40% of profit | FY23 (subject to board approval) |
Key Metrics
| Metric | Q4 FY23 |
|---|---|
| Revenue from operations | ₹53.8 cr, +4.4% YoY |
| Full-year revenue FY23 | ₹216.9 cr, +11% YoY |
| Revenue – bi-metal (FY23) | ₹159.5 cr |
| Revenue – Alkop (FY23) | ₹57.3 cr |
| Gross profit | ₹25 cr in Q4; ₹94 cr for full year FY23 |
| Gross profit margin | 46.6% in Q4, up 627 bps QoQ; 43.4% for FY23 vs 45.5% in FY22 |
| EBITDA margin | 24%–25%, sustained and improving further |
| Exports change | -2.6% from FY22 to FY23 |
| Bi-metal exports value degrowth | 13% |
| Bi-metal capacity | 4.85 crore units per annum, utilization ~68% |
| Alkop capacity | 1,440 metric tons per annum, utilization ~70% |
| Bi-metal capacity addition in FY23 | 30 lakh units per annum |
| Brakes installed capacity | 15 lakh units per annum for brake liners, 2.4 lakh units per annum for brake shoes |
| Capex – brakes | ₹8 cr |
| Capex – existing segments planned | ₹30 cr, staggered by FY25, funded mainly through internal accruals |
| Brakes expected first-year revenue | ₹25 cr to ₹27 cr |
| Brakes expected EBITDA margin | 18%–19% |
| Revenue growth expectation FY24 | 20% in both bi-metal and Alkop segments |
| RFQs in pipeline | >₹100 cr |
| RFQ conversion ratio | 80% to 85% |
| Bi-metal market share | 20% to 25% |
| Brakes aftermarket size | ₹900 cr |
| Brakes aftermarket share target | 15% |
| Brakes division three-year revenue target | ₹100 cr (estimate, not a commitment) |
| Revenue potential at full capacity utilization | ~₹400 cr (including existing, ₹30 cr capex, and brakes) |
| Domestic auto mix – tractors | 30% |
| Domestic auto mix – HGV | 20% |
| Bi-metal division auto share | ~80% |
| Alkop division auto share | ~50% |
| Alkop FY23 revenue growth vs volume growth | ~29% revenue growth vs ~6% volume growth |
| Export market potential for bi-metal bearings | ~₹6,000 cr (per management's knowledge) |
| Export margins vs overall | 3% to 4% higher than overall margins |
| Dividend payout ratio FY23 | Below 35% vs stated policy of 45%–50% |
| Brakes asset turnover | ~3x |
| Brakes additional line cost | ₹1.5 cr to ₹2 cr per line |
| Brakes distributors registered | 50+ across India |