Key Takeaways
- Strong H1, H2-weighted year: Revenue and profitability improved significantly in H1 FY27, and management expects the heavier H2 to lift full-year EBITDA margin above last year's 22.8%.
- Mix shift driving value, not tonnage: The portfolio is concentrating into superalloy and titanium alloys, where quantity is lower but value is much higher; superalloy production is 5-6x the level of five years ago.
- S-400 certification unlocks a new revenue stream: Certification arrived in H1, four or five inquiries are already being processed, and revenue numbers are expected in H2.
- Capacity is the binding constraint: With current equipment, revenue beyond ₹1,500 crore is not possible; the ₹1,000 crore capex plan will take a minimum of three years once financial sanction is obtained.
- What to watch next quarter: Whether the ₹450–500 crore of orders expected in Q3 materialize, clarity on the capex financial approval, and any update on the unanswered AMCA production-order timeline.
Revenue Drivers & Product Mix
- Niche, high-value, low-volume model: Revenue is driven by specialized products where tonnage growth is not a meaningful metric because product mix varies widely; titanium alloys are low-tonnage but high-value.
- Aerospace concentration rising: 35% of products currently go to aerospace, and the sector's share of the open order book is increasing; management expects the contribution to be much higher based on sourcing claims from the Indian market.
- Superalloy and titanium taking over: Special steel and other alloys have declined as a share; the company is concentrating on superalloy and titanium alloys, where value per unit is higher. Last year saw the highest-ever titanium alloy production, and this year will surpass it.
- Indigenization engine running: 15-20 new grades are added per quarter, with more than 70-80% being superalloy and titanium; the number of indigenized items has increased every quarter.
- Space sector defensibility: Competition is emerging for stainless steels, but maraging steel plates, ring products, superalloy products, and titanium alloy products for propellant tanks and gas bottles are niche products with technologies developed over nearly four decades; qualification timelines for new entrants are long.
Narayana Murty: "We are the lead suppliers for all aerospace, be it super alloys, titanium alloys, or special steels. MIDHANI is the leader in this area. So we don't have any doubt that we will be approached once it comes."
Order Book & Execution Capacity
- Order inflow visibility: Management expects ~₹500 crore of orders in FY27, with ₹450–500 crore anticipated in Q3 alone; the current order book provides 1-2 years of executable orders at the ₹1,500–1,600 crore run-rate.
- Execution, not order booking, is the constraint: The company could book 3-4x more orders but that would lead to delays and LD clauses; management is balancing available capacity to avoid penalties.
- Wide plate mill as strategic asset: All flat products come from this mill, and earlier long-processing hot rolling has been diverted to it; management describes it as a truly national strategic asset that eliminates India's need to import, and sees potential for aluminium rolling in the future.
- H2 execution bias: The second half is always heavier than the first half in executing, which is the usual tendency and supports the margin guidance.
Babu: "So presently we are balancing with the whatever available capacity and able to supply, not getting into any LD all. This is the way we are planning and going at it."
Margins & Cost Structure
- H1 margin absorption: H1 FY27 EBITDA margin of 20% was achieved despite absorbing increased LPG and fuel costs and higher raw material prices under fixed-price contracts.
- Full-year margin commitment: Management is confident of crossing last year's 22.8% full-year EBITDA margin in FY27, driven by higher H2 sales volumes that will absorb fixed costs.
- Operating leverage beyond FY27: Margins are expected to increase proportionately as sales volumes rise, since fixed costs remain almost the same.
- Scrap efficiency improving: Scrap inventory value fell from ₹392 crore to ~₹353 crore; net scrap reduction is a positive indicator of processing efficiency, though some scrap must be maintained to start new melts.
- Raw material price outlook: Prices have been elevated but some cooling off is now being seen; management is hopeful this continues if supply chains remain uninterrupted, though the situation depends on geopolitics.
- Virgin vs scrap mix: On average, 70% virgin and 30% scrap usage is expected, though some customers like Gaganyaan require 100% virgin material.
Kalluri: "FY '27 will certainly be crossing that last year figure of 22.8%. We are confident in that because the sales- when the sales volumes increases, obviously the margins will increase."
Strategic Initiatives & New Capabilities
- S-400 certification: Received in H1 FY27; four or five inquiries are currently being processed, and revenue numbers are expected to be available in H2.
- 3D printing powder manufacturing unit: A purchase order has been placed and a preliminary BAFA license obtained after delays due to dual-use technology; the ~₹40 crore facility is expected to be established in the coming one year, addressing India's 100% import dependence for titanium powders.
- Metal bank: Five customers are on board; one has almost completed procurement, processing is ongoing for the second, and the full metal bank reserve is expected to be in place by FY27-end.
- Nickel-cobalt recovery MoU with Heavy Water Board: Signed for recovery of nickel and cobalt from scrap and alternate sources; bench-level and pilot plant trials are completed, and the goal is to establish that recovered metals can be used in aerospace and defense components. This is a strategic initiative aligned with the National Critical Minerals Mission, not a near-term profit driver.
- Nadcap certifications: Nadcap certification for heat treatment has been obtained; certification for non-destructive testing is in process. These are prerequisites for long-term OEM contracts.
- Spring manufacturing plant: Now operational and obtaining licenses; a couple of smaller orders have been received, and the certification process for Vande Bharat is ongoing, though no direct order has been booked yet.
- ABHED bulletproof jackets: Technology taken from the IIT Delhi DRDO Center of Excellence; some jackets have been processed, and the company is participating in tenders, but no orders are currently booked.
Narayana Murty: "We are not looking at it very, business-wise... in future also these raw materials are critical for the country. Any supply chain bottleneck is going to have from everyone who is in this business. So as a strategic thing, we have gone for this and we want to work."
Aerospace & Defence Pipeline
- OEM audit progress: Most named companies including Boeing, Airbus, Rolls-Royce, Safran, and CFM have already visited; qualifications are expected one by one in the coming year, with orders to follow. Initial orders are expected in tens of crores at least, starting with non-critical parts and less advanced alloys.
- Long-term contract structure: Once audits conclude, expected in perhaps another year, contracts will be long-term with a price variation clause only, not fixed price, and will specify monthly component quantities.
- S-100 approval from GE Aerospace: Received in August or September.
- AMCA development orders: Trial orders for specialized titanium grades with tighter specifications never made before are under execution; production orders should follow once grades are successfully made to specifications.
- AMTDC testing facility: MIDHANI holds a 20% stake in a consortium with HAL, BDL, and TTC; facilities in Tamil Nadu and UP are intended as common testing facilities for the private sector, startups, and MSMEs in those industrial corridors.
- DAP-26 defence acquisition policy: Government pressure on equipment buyers to purchase from indigenous sources is expected to benefit MIDHANI and similar companies.
Capex & Capacity Expansion
- ₹1,000 crore capex plan: Board approval has been obtained but financial approval is pending; specifications are under finalization and a DPS has been obtained. Most likely, more clarity will emerge by next quarter.
- Three-year execution timeline: Once financial sanction is obtained, the investment will take a minimum of three years to complete.
- Revenue ceiling without capex: With current equipment, revenue beyond ₹1,500 crore is not possible; once the new facility is available, the company can think of ₹2,000 crore or beyond and will immediately meet import-substitution requirements.
- 20% growth ambition: Management expects to match and beat last year's figures, with confidence in moving into more superalloy and titanium, though the 20% growth reference was non-specific.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Full-year EBITDA margin | Cross last year's 22.8% | FY27 |
| Order inflow | ₹450–500 crore of orders expected | Q3 FY27 |
| S-400 certification revenue | Numbers expected to be available | H2 FY27 |
| Metal bank reserve | Full reserve in place | FY27-end |
| 3D printing powder facility | ~₹40 crore facility established | Coming one year |
| Capex financial approval clarity | More clarity expected | Next quarter |
| Capex completion | ₹1,000 crore plan completed | Minimum three years from financial sanction |
| Long-term OEM aerospace contracts | Contracts with price variation clause | Perhaps one more year of audits |
| Revenue ceiling without capex | Beyond ₹1,500 crore not possible with current equipment | Until capex completes |
Key Metrics
| Metric | Q2 FY27 |
|---|---|
| Revenue | ₹295.91 cr, +41.09% YoY |
| Value of Production | ₹310.8 cr, +21.23% YoY |
| PBT | ₹38.75 cr, +102.56% YoY |
| PAT | ₹27.69 cr, +116.84% YoY |
| H1 FY27 Revenue | ₹535.4 cr, +40.81% YoY |
| H1 FY27 PAT | ₹44.01 cr, +72.05% YoY |
| H1 FY27 EBITDA margin | 20%, vs 22.8% in FY26; management expects to surpass FY26 figure in H2 |
| Order book | ₹2,164 cr as of 1 Oct 2026 |
| Order inflow guidance | ~₹500 cr expected in FY27, with ₹450–500 cr in Q3 |
| Revenue target (Ministry) | ₹1,600 cr for FY27 |
| Order book split | 35% aero, 22% space, 14% naval, 10% missile, 8% energy, 8% others |
| Revenue mix by alloy | ~20% superalloys, ~22% titanium alloys, ~13% maraging steels, ~36% special steels, ~9% others |
| Revenue mix by sector | ~48% PSUs, ~26% defense, ~10% exports |
| Scrap inventory | ~₹353 cr, reduced by ~₹39 cr in H1; down from ₹392 cr at year start |
| Scrap usage ratio | ~30% scrap, 70% virgin on average; varies by customer specification |
| New grades added per quarter | 15–20 grades, over 70–80% in superalloy and titanium |
| Wide plate mill capex | ~₹400 cr as part of ₹1,000 cr plan; can roll up to 3.2 m width |
| Revenue ceiling (current capacity) | ~₹1,500 cr; ₹1,000 cr capex needed to exceed this |