Key Takeaways
- Record revenue, double-digit margins: Revenue grew 57% YoY to an all-time high of ₹1,147 crores, while EBITDA margins held at 10.8% despite premium semiconductor buying.
- EV order book is building, but revenue is years away: EV orders now make up 19% of the total order book, yet management cautions that the ₹2,000 cr EV order book will start reflecting in the top line only from about two years out.
- Wiring harness margin recovery is an 18-month self-help story: Indigenization of imported connectors, from ~10-12% now to ~20-22%, is the primary lever to lift segment EBITDA from ~7% toward higher single digits.
- ADAS bets are long-dated and exclusive: The exclusive TLA with Daesung Eltec kicks off a ~2-year testing and validation cycle, pushing any material revenue contribution out to FY25-26.
- What to watch next quarter: Whether easing commodity prices flow through to gross margins as expected, the pace of wiring harness indigenization, and any stabilization in European export demand.
Revenue Growth & Profitability
- Broad-based domestic strength: Revenue growth of 57% YoY was driven by operations outperforming industry production, new business wins across segments, and increased share of wallet from existing customers.
- Exports weighed down by Europe: Exports grew about 10% YoY but were impacted by the looming energy crisis and geopolitical tensions in Europe, with starter motor exports to the Ukraine-Russia aftermarket a specific concern.
- PAT growth lagged EBITDA: PAT increased 48% YoY to ₹57.8 crore, held back by a ~₹5 cr share of loss from associates, largely a provision for a customs classification matter at one associate.
- Gross margin optically diluted by semiconductor pass-through: Gross margins fell ~4 percentage points YoY because of commodity inflation and premium semiconductor buying; the premium is a cost-to-cost pass-through with no margin earned, so it dilutes margins optically.
- Product mix shift protected EBITDA: Despite the gross margin drop, EBITDA margins improved 20 bps YoY as a shift in mix toward commercial and EV vehicles offset a decline in the higher-margin aftermarket segment.
- Working capital days improved: Absolute working capital rose on strong top-line growth, but days of receivables and inventory actually improved marginally.
Vinod Raheja: "When we buy these IC's or semiconductors at port prices which are much higher and before we procure, we have the commitment from the customers to pay those port prices which are higher than normal prices actually. And therefore, it is a quick pass through basically but we don't earn any margin on those pass throughs basically."
Wiring Harness Margin Recovery Plan
- The problem: Wiring harness connection systems currently import ~85% of connectors, keeping segment EBITDA at ~7%.
- The fix: Management plans to double indigenous component content from ~10-12% to ~20-22% by the end of this year or middle of next year, targeting higher single-digit EBITDA (~9%).
- The timeline: The full margin improvement journey is pegged at ~18 months plus-minus from now, with localization, operator efficiency, and raw material pass-through (with a 1-2 quarter lag) all contributing.
- Wage cost volatility: Wage costs in wiring harness have increased due to plant-level and order-specific factors, varying month-to-month and quarter-to-quarter rather than representing a sustained structural increase.
Aakash Minda: "Going forward in terms of the wiring harness connection systems so currently about 85% connectors are imported and currently our own indigenous products are about 10% to 12%. By the end of this year and about middle of next year we plan to move to about 20% to 22% of indigenize components coming from our own division which will take our EBITDA to higher single digit numbers."
EV Strategy & Order Book
- Products are EV-agnostic, kit value rises with electrification: All products Minda makes work across ICE and EV platforms; as EV penetration increases, the same products carry higher kit value and go through greater premiumization.
- Kit value ambition is large but contingent: Total kit value per vehicle is expected to rise from ₹4,000-4,500 toward ₹16,000-20,000 across product lines, with improvement starting in FY24 and accelerating in FY25, contingent on EV industry uptake.
- EV order book is material but back-end loaded: At ~₹2,000 cr and 19% of the total order book, EV orders are significant, but management expects them to start reflecting in the top line only from about two years out.
- Overseas EV orders beginning: The company has started winning orders from EV customers in Europe, adding an export dimension to the EV story.
- Product readiness is high: All EV products except motor controllers and battery management systems are already under mass production, including clusters, keyless entry, wiring harness, sensors, battery chargers, and DC-DC converters.
Aakash Minda: "Yes, absolutely but again I would like to always caution here on the uptake of the EV industry. Of course, while the EV is growing month-on-month and quarter-on-quarter but there are various challenges in terms of cost of ownership, fire issues and other such issues which relate to demotivation of customers."
ADAS & Technology Partnerships
- Daesung Eltec TLA is exclusive and long-dated: The 100% exclusive technology license agreement covers in-vehicle infotainment and ADAS solutions for four-wheelers, commercial vehicles, and off-road vehicles; technology will be brought from Korea and indigenized for Indian OEMs.
- Commercialization timeline stretches to FY25-26: Customer engagement begins immediately, but testing and validation may take about two years, pushing any material revenue contribution out to FY25-26 once orders are won.
- Ride Vision two-wheeler ADAS still in development: The TLA with Ride Vision (Israel) is in the localization and indigenization phase; the market is still evolving, regulations are yet to arrive, and the company is in discussions with customers for testing and validation.
- Investment requirements are undefined: Management declined to quantify the investments needed for the Daesung Eltec TLA, noting only that the electronics division is capable of manufacturing and general growth CAPEX may be required.
- R&D spend to stay at 2-2.5% of revenue: The Pune technical center is expanding to enhance software competencies, supporting the broader technology push.
Segment & Division Performance
| Division / Segment | Trend | Commentary |
|---|---|---|
| Mechatronics | ▲ Revenue stable, margins improving | Strong domestic demand and share of business gains offset export weakness; margins improving on higher productivity. |
| Information & Connected Systems | ▼ EBITDA margin impacted | Revenue up on strong domestic demand, but EBITDA margin took a hit from premium semiconductor buying, mostly in Minda Instruments. |
| Diecasting | ▲ Strong growth | Grew ~50% YoY and 5% QoQ, though European exports were noted as a headwind; focus on light-weighting solutions and EV penetration. |
| Minda Instruments (MIL) | ▬ Steady margin | EBITDA margin at ~10-10.5%, up ~100 bps YoY and 12% QoQ; clubbed into Information & Connected Systems this quarter. |
| Aftermarket | ▲ Expanding scope | Recently added lubricants, helmets, and other product lines; entered Bangladesh and Africa geographies. |
- Other expenses in check: As a percentage of sales, other expenses should remain under control and come down slightly as long as growth exceeds 15%, though energy prices and normalized travel expenses created some pressure.
- Rupee depreciation largely neutral: Exchange rate variations are indexed with OEMs and compensated with a ~1 quarter lag; the Japanese Yen also depreciated, muting any net benefit.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Wiring harness margin improvement | Indigenize components from ~10-12% to ~20-22%, lifting EBITDA from ~7% to higher single digits (~9%) | ~18 months plus-minus from Q2 FY23 |
| EV kit value expansion | Per-vehicle kit value to rise from ₹4,000-4,500 toward ₹16,000-20,000 | Improvement starts FY24, good improvement in FY25, contingent on EV uptake |
| EV order book revenue conversion | ~₹2,000 cr EV order book to begin contributing to top line | ~2 years from Q2 FY23 |
| Daesung Eltec ADAS commercialization | Technology indigenization, testing, and validation leading to orders | Revenue expected somewhere in FY25-26 |
| Gross margin recovery | Easing commodity prices to flow through with 3-6 month pass-through lag | Positive impact expected from the following quarter |
| Other financial assets normalization | Unbilled revenue from commodity pass-through and security deposits to unwind | Next quarter |
| H2 CAPEX | Expected to be lower than or similar to H1; growth-related CAPEX may also be considered | H2 FY23 |
Key Metrics
| Metric | Q2 FY23 |
|---|---|
| Revenue | ₹1,147.1 cr, +57% YoY, highest ever quarterly revenue |
| EBITDA | ₹123.8 cr, +60% YoY |
| EBITDA margin | 10.8%, double-digit margin sustained despite semiconductor premium buying |
| PAT | ₹57.8 cr, +48% YoY |
| PAT margin | 5% |
| Revenue growth (standalone, ex-Minda Instruments) | +28% YoY |
| Mechatronics division revenue | ₹531.4 cr, up from ₹420.3 cr QoQ |
| Mechatronics division EBITDA margin | 14%, up from 13% QoQ |
| Information & Connected Systems revenue | ₹616 cr, up from ₹533 cr QoQ (includes Minda Instruments) |
| Information & Connected Systems EBITDA margin | 8%, down from 8.9% QoQ, impacted by semiconductor premium buying |
| H1 FY23 order book | ~₹4,200 cr (Q1: ~₹2,500 cr, Q2: ~₹1,700 cr), 19% from EV segment |
| EV order book (last ~18 months) | ~₹2,000 cr from EV customers and platforms |
| Net debt | ₹93.4 cr |
| Debt-to-equity ratio | 0.06 |
| H1 FY23 ROCE | 21.1% |
| H1 FY23 CAPEX incurred | ~₹110 cr; full-year outlook ~₹160–170 cr |
| Wiring harness division EBITDA margin | ~7%; target higher single digit (~9%) in ~18 months |
| Minda Instruments EBITDA margin | ~10%–10.5%, +100 bps YoY |
| Exports growth | +10% YoY |
| Diecasting division growth | +50% YoY, +5% QoQ |
| Capacity utilization – Wiring Harness | 80%–85% |
| Capacity utilization – Diecasting | 80% |
| Capacity utilization – Safety & Security | ~60% |
| Capacity utilization – Electronics | 50%–60% |
| R&D spend | ~2%–2.5% of revenue |
| Wiring harness connectors imported | ~85%; indigenous ~10%–12%, targeting 20%–22% by mid-next year |
| Total potential kit value per vehicle | ₹16,000–20,000, up from ₹4,000–4,500 legacy |
| Four-wheeler ADAS serviceable market by 2030 | ₹1,500–2,000 cr |