Key Takeaways
- PAT down on investment costs, not operations: PAT fell to INR 52 crores from INR 71 crores, driven entirely by higher finance costs for the Flash Electronics stake and depreciation from capacity expansion, while EBITDA margin expanded 31 bps to 11.4% for the full year.
- Flash Electronics is the new growth engine: Flash delivered INR 1,537 crores revenue, 15% growth, with EV revenue surging 92% YoY to 23% of its mix; management expects mid- to high double-digit growth to continue.
- Order book at an all-time high: Lifetime orders exceeding INR 8,000 crores booked in FY25, with ~25% from EV platforms, plus INR 700 crores in export wiring harness orders.
- Cross-selling is the near-term catalyst: Three product areas identified for cross-selling between Minda and Flash, with SOP expected by year-end and a "3-digit number" revenue contribution targeted by FY27.
- What to watch next quarter: The pace of SOP ramp-ups from the INR 8,000 crore order book, the start of joint sourcing benefits with Flash, and any passenger vehicle high-voltage order wins management hinted at but declined to disclose.
Flash Electronics: The Strategic Bet
- Acquisition completed: Minda acquired a 49% stake in Flash Electronics in January 2025, and the transaction is now fully closed.
- FY25 performance: Flash delivered INR 1,537 crores revenue, growing 15% YoY, with EBITDA of INR 223 crores, up 12%. EV revenue hit 23% of Flash's total, growing 92% YoY.
- Growth trajectory intact: Management expects Flash's revenue growth momentum to remain in the mid- to high double-digit range, depending on EV penetration.
- Order book momentum: Flash is consistently winning orders from its largest customer across new segments, and has recently secured export orders from its Metallics division.
- New product pipeline: Multiple products are under development across segments, with work underway with a couple of Indian customers; products have been showcased but no wins disclosed yet.
- EPS accretion timeline clarified: Management corrected an earlier impression, stating Flash will be EPS accretive from FY27, not FY26.
Aakash Minda: "the growth momentum in the revenue of Flash Electronics should be again in the similar range that they have been doing for the last few years. So, again, in the range of mid- to high double-digit percentage."
Cross-Selling & Synergies
- Three product areas identified: Die casting, wiring harnesses, and electronic components are the focus for cross-selling between Minda and Flash; end-customer approval is already underway.
- Revenue timeline: Management expects these cross-selling products to enter SOP by the end of the current year, with a "3-digit number" (INR 100+ crores) contribution targeted by FY27.
- Joint R&D underway: Engineering teams from Minda's technical center and Flash's Poland team have started collaborating on product design and development.
- Sourcing synergies started: Joint sourcing benefits have already begun and will reflect from Q1.
- Customer access expanding: Minda Corporation has started introducing other customers to Flash for audits and inclusion on bidders lists, broadening Flash's customer base beyond its largest client.
Aakash Minda: "we have already identified 3 important areas for cross-selling. These products such as die casting or wiring harnesses and electronic components needs end customer approval. So that is already underway and hopefully, by end of the year, we shall have these in SOP. And by FY27, we can see maybe close to a 3-digit number coming into cross-selling."
Order Book & Capacity Build-Out
- Record order intake: Lifetime orders exceeding INR 8,000 crores were booked in FY25, with approximately 25% coming from EV platforms.
- Export wiring harness wins: Multiple export orders secured with a lifetime order book of INR 700 crores.
- Capacity expansion ongoing: Two to three brownfield expansions are underway in the Die Casting division and Information and Connected Systems division, which drove the depreciation increase that weighed on Q4 PAT.
- SOP ramp-up imminent: Order books converted over the last two years will start entering SOP from this year onwards, with plants beginning production in the next few months and economies of scale expected to follow.
- Greenfield facilities planned: Two greenfield manufacturing facilities will be built over the next 18 months, one in die casting and one in information and connected systems.
- Sunroof JV timeline: The 50-50 joint venture plant near Pune is in progress and will be treated as an associate company; revenues will start from FY27, not FY26.
Wiring Harness & Connection Systems
- Localization progressing: The localization journey for connectors began about two years ago; current utilization of Minda connectors from its own Wiring Harness division stands at about 15%.
- Localization target: Management aims to reach 20% to 25% connector utilization over the next 18 to 24 months.
- High-voltage connector orders: Through the partnership with Sanco, Minda has won multiple orders for high-voltage connectors, bus parts, charging guns, and power distribution units; SOP expected in the next few quarters.
- High-voltage capability: Minda claims to be one of the first companies to develop high-voltage connection systems in India, a product category currently dominated by imports.
- EV customer base: The company is supplying high-voltage wiring harnesses to the top three EV 2-wheeler manufacturers and the largest three EV 3-wheeler manufacturers, all of which are now scaling up volumes.
- Division profitability stabilized: The Wiring Harness division is now delivering sustainable growth in order books and exports, with profitability reaching a consistent and sustainable level.
- Passenger vehicle orders undisclosed: When asked about order wins for high-voltage products in passenger vehicles, management declined to share details, saying only "I will be able to only share that soon."
Aakash Minda: "currently, the connection systems are imported. And we are one of the first companies to develop this connection systems of high voltage in India, that capability."
Financial Position & Capital Allocation
- PAT decline explained: Q4 PAT fell from INR 71 crores to INR 52 crores due to higher finance costs from the Flash Electronics investment and increased depreciation from capacity expansion, not operational weakness.
- EBITDA margin expanded: FY25 EBITDA margin expanded 31 bps to 11.4%, driven by operational execution and strategic initiatives.
- Promoter warrants issued: Warrants from promoters have been issued to help reduce debt; stock exchange approval was expected within the week of the call, with 25% of funds received within two weeks and the balance 75% within 18 months.
- Use of funds undisclosed: When asked whether the INR 420 crores promoter fund would repay debt or fund new investment, management deflected, stating only that capital allocation would follow "potential norms" and "various financial metrics."
- Debt reduction target: Management wants to bring the debt-to-equity ratio down from 0.5x to approximately 0.2x over the next two to three years.
- Capex guidance: Standalone capex is expected to remain in the range of INR 250 crores to a maximum of INR 350 crores; Flash capex will broadly be in the range of INR 50 crores to INR 100 crores.
- Dividend: The board recommended a final dividend of 45% on face value, INR 0.90 per equity share, bringing the total to 70% for the year.
Aakash Minda: "we would like to significantly reduce this. And this is why the warrants from the promoters have also been issued. So, yes, the interest is how we can bring down the 0.5x debt to equity to about 0.2x in the next 2 to 3 years."
Product & Technology Updates
- Sensors revenue: Sensors contributed INR 250 crores to INR 300 crores in revenue, with further growth expected as localization deepens and new sensors enter SOP in the coming quarters.
- Die casting growth corrected: Management pushed back on an analyst's assertion of 40% YoY degrowth in die casting, clarifying the division actually grew 15.5% for the full year and 15% to 16% quarterly.
- Digital clusters growth: The TFT cluster business is expected to grow to approximately 40% of its current base over the next 18 to 24 months, though management declined to provide a specific revenue contribution figure.
- IPR portfolio: Thirty new patents were filed during FY25, with more than 13 filed in Q4 alone, taking the total IPR portfolio to over 300.
- EV penetration: EV platforms stood at about 8% of total sales in Q4 and 7% for the full year, with growth expected from new product launches and SOPs.
- Three strategic partnerships were signed during FY25.
- Carbon commitment: The company is targeting a 42% reduction in its carbon footprint by 2030.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Cross-selling revenue | "Close to a 3-digit number" (INR 100+ crores) from cross-selling products | By FY27 |
| Cross-selling SOP | Die casting, wiring harnesses, electronic components enter SOP | By end of current year |
| Flash EPS accretion | Flash Electronics becomes EPS accretive | From FY27 |
| Debt reduction | Debt-to-equity from 0.5x to ~0.2x | Next 2 to 3 years |
| Connector localization | Connector utilization from 15% to 20-25% | Next 18 to 24 months |
| Standalone capex | INR 250 crores to max INR 350 crores | Ongoing annual range |
| Flash capex | INR 50 crores to INR 100 crores | Ongoing annual range |
| Promoter warrant funds | 25% of INR 420 crores received | Within 2 weeks of stock exchange approval |
| Promoter warrant balance | Remaining 75% received | Within 18 months |
| Sunroof JV revenue | Revenue generation begins | From FY27 |
| Greenfield facilities | Two new plants (die casting, information & connected systems) | Over next 18 months |
| Carbon footprint reduction | 42% reduction | By 2030 |
Key Metrics
| Metric | Q4 FY25 |
|---|---|
| Revenue | ₹1,321 cr, highest ever, +9% YoY |
| EBITDA | ₹153 cr, highest ever |
| EBITDA margin | 11.6%, highest ever, +17 bps YoY |
| PBT | ₹65 cr, margin 4.9% |
| PAT | ₹52 cr, margin 3.9%, impacted by higher finance costs for Flash Electronics investment and increased depreciation |
| FY25 annual revenue | ₹5,056 cr, highest ever, +9% YoY |
| FY25 annual EBITDA | ₹575 cr, +12% YoY, margin 11.4%, expansion of 31 bps |
| FY25 annual PAT | ₹255 cr, ~12.5% YoY growth |
| Lifetime orders booked in FY25 | >₹8,000 cr, ~25% from EV platforms, ~15% exports |
| EV revenue share | ~8% of total revenue, full year ~7% |
| Flash Electronics FY25 revenue | ₹1,537 cr, +15% YoY, EBITDA margin 14.5%, PAT ₹86 cr |
| Flash Electronics EV revenue share | 23% of revenue, +92% YoY |
| Share of profit of associates | ₹10.30 cr vs ₹1.15 cr in Q4 FY24, includes ~₹8 cr from Flash Electronics for 75 days |
| Net debt | ₹1,250 cr, net debt to net worth 0.6x, net debt to EBITDA 1.8x |
| ROCE | 20%, up from 12% five years ago |
| Die Casting division growth | +15% to 16% YoY for the quarter, +15.5% for full year |
| Minda Instruments Limited growth | ~20% YoY |
| Wiring harness connector localization | ~15% utilization of in-house connectors, target 20% to 25% in 18-24 months |
| Digital clusters share | ~15% to 20% of instrument cluster business |
| Smart key systems penetration | ~15% of locking system revenue |
| R&D investment | >4% of revenues, team of >900 engineers |
| Final dividend | ₹0.90 per share, 45% on face value, total 70% for the year |