Key Takeaways
- Profitability surged without Beryl: Q1 profitability jumped nearly 4x QoQ and 12x YoY, achieved entirely through cost restructuring and productivity gains, with Beryl still a drag on the bottom line.
- MES restructuring is structural: The long-bleeding automobile/EV division has been downsized from 130 to 50-60 people, removing a persistent earnings headwind and lifting EBITDA margins to 19%, well above the ~15% guided.
- Civil work-on-hand signals momentum: Civil work on hand grew to $4.5 million (vs. $3.5 million last year), a leading indicator that gives management confidence for Q2 and beyond.
- Beryl is a Q3 story: The acquisition is expected to break even in Q2 and turn profitable from Q3, with a new India design team ramping to capture cost arbitrage; a $1 million county MPO provides steady workflow.
- What to watch next quarter: Whether Beryl actually breaks even in Q2, the pace of the new power-distribution MSA ramp, and any concrete progress on the structural-design acquisition that management says could close this calendar year.
The MES Turnaround
- Cost base reset: The automobile/EV design team was cut from 125-130 people a year ago to 50-60 now, eliminating expensive software costs and EV-specialist resources that had no workflow. The division had lost ₹7-8 crores overall year last year because the company held capacity hoping for an EV revival that never materialized.
- Remaining team repurposed: Some people were shifted into electrical poles and towers design and substation design, where demand is growing; the poles and towers/substation team is being doubled. The residual EV team is kept thin to retain knowledge for a possible market revival in 2-3 years.
- Historical context: MES was profitable in only 2-3 of its ~8-9 years, with a pattern of 3 months of projects followed by 3 months idle. Management now calls the domain unreliable and has removed the redundancy, keeping only a team of 45-50 people.
- Margin impact: The downsizing, combined with high automation and an incentive system driving productivity over the last 3-5 months, pushed EBITDA margin to 19% in Q1. Management calls both factors long-term structural improvements, not one-time.
Lakshmana Rao: "We want to continue in EV because once it comes back, maybe after 2-3 years, we should not be lagging in knowledge. So, we have kept a team of 50-60 people who are relatively busy now."
Beryl Integration & Ramp
- Q1 performance: Beryl contributed small losses in Q1 and did not add to the bottom line. Two design employees left post-acquisition (out of 38), causing a setback. A new 6-person India design team is now catching up on domain knowledge.
- India design team build: The team has grown to 7 people in India and 3 in the US, with a target of 15-20 by October-November. Once the India team executes, cost arbitrage kicks in: design revenue, currently only $20,000-$30,000 per month, can scale to $200,000-$300,000-$500,000 per month. That benefit is expected from next year onwards.
- PE relocation: One Professional Engineer from India is relocating to Florida from October-November on an L1 visa, strengthening front-ending capability alongside Beryl's existing 4-member design team.
- County MPO: A $1 million Master Purchase Order received in July 2026 from Hillsburg County provides steady workflow separate from daily residential orders.
- Georgia expansion: Beryl is now getting listed as an approved engineering service provider in Georgia via the existing Atlanta office; work is expected to start as a trickle and pick up by year-end, with benefits accruing from Q3-Q4. The number of contracts could double with two states.
- BD team cross-training: Beryl's 3-member BD team of engineers is being trained to handle business development for core structural designing and detailing operations; contributions expected from Q3.
- Promoter warrants lapsed: The original Beryl promoters declined to subscribe to warrants because the 6-month average offer price (~₹165) was ~30% above the then-market price (~₹130). Management did not press the issue.
Lakshmana Rao: "And this is another very important point to note here is this is without Beryl really contributing anything to the bottom line. Maybe on the top line there was some addition, but the process of integration has started..."
Civil & Power: The Core Growth Engine
- Civil work-on-hand: At $4.5 million (vs. $3.5 million last year), this is a key leading indicator because civil projects last 3 months to 1 year. The strong position gives management confidence for Q2.
- Power-distribution MSA: A new contract with the #1 power distribution company in the US is expected to generate ~$1 million per annum for the next 12 months starting August, with very good margins. The team has started with 5 people billing from July, ramping to 20 by October-November, and the client may take the company into other lines of activity in coming years.
- Power substation: Current revenue of ~$0.2 million can grow 3x-5x to $0.5-1 million in the next 2-3 years.
- Data center work: The company has completed a couple of data center structural projects in the last 1-1.5 years and is aggressively marketing for more.
- Productivity leverage: Automation-driven productivity improvements mean revenue can grow with a less-than-proportionate increase in employee cost, a dynamic that supports margin expansion as workflow scales.
Lakshmana Rao: "...going forward, the unduly, I mean, I would say wavering in the performance won't be there, I hope, as long as the civil work on hand is strong."
The Structural Acquisition Thesis
- Target profile: Management is in talks to acquire a US structural engineering firm with both structural steel and residential background, about 7-8 PEs on board, and over 20 years of existence with deep-rooted contacts and many projects to showcase. The target has a team of about 15 engineers, half of whom are PEs and SEs.
- Strategic logic: Mold-Tek is strong in detailing and connection design; Beryl is strong in government permits and residential work, but not in design. Adding a design firm would create a complete civil engineering service provider capable of charging a percentage of project cost (2-3%) rather than hourly rates, and targeting general contractors directly rather than erectors and fabricators.
- Timeline: Management says the deal is in "close proximity" and could happen within this calendar year. The CEO returns to the US on August 16 to interact with the target; a second visit is planned for end-September, with a decision to either take or drop the deal in October.
- PE team rationale: Building a PE team organically in the US is described as "next to impossible" because finding PEs willing to work for an Indian company with 10-20 years of experience is very difficult. The acquisition buys time that would otherwise take 10 years to build.
- 5-year aspiration: Management's vision is to add an architectural firm as well, creating an A-to-Z provider for residential, commercial, and industrial projects, all working on percentage-of-project-cost rather than hourly rates.
Lakshmana Rao: "So, this one what we are looking at is a team of about 15 engineers. Half of them are PEs and SEs. So, that kind of company with more than 20 years of existence, so they will have very deep rooted contacts and many projects to showcase, which you can't get by yourself. It would take another 10 years. So, we want to buy the time."
Margins & Profitability
- Q1 EBITDA margin: Reached 19%, significantly above the ~15% guided, driven by MES cost reduction and automation-led productivity gains. Both are described as long-term structural improvements.
- Other expenses: MTM losses present last quarter were absent this quarter, further reducing other expenses.
- FX tailwind: The rupee strengthened a bit, resulting in a gain of about ₹1-1.2 crores this quarter.
- PAT margin target: Management aims to maintain 15-16% PAT margin, with upside once Beryl starts contributing. Beryl's own PAT margin is expected at most 10%.
- FY27 outlook: EBITDA margin expected to reach at least 20%, possibly 20-23% (up from ~11% last year). Revenue target of ₹240-250 crore, with Q1 at ~₹61 crore and a similar quarterly trend expected in Q2.
Lakshmana Rao: "I think the trend was, the way it is going on, the EBITDA margins can even reach at least 20% if not 23% what we achieved in the current quarter. So, last year it was around 16% EBITDA. So, it should at least cross 20%-23% level. Sorry, last year it was 11%. So, it should reach at least 20+ in the current year."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Beryl break-even | Beryl to reach break-even | Q2 FY27 |
| Beryl profitability | Beryl to start contributing to bottom line | Q3 FY27 onwards |
| Beryl design team ramp | India design team to grow from 7 to 15-20 people | By October-November 2026 |
| Power MSA revenue | ~$1 million per annum from new power-distribution client | Next 12 months starting August 2026 |
| FY27 revenue | ₹240-250 crore | FY27 |
| FY27 EBITDA margin | At least 20%, possibly 20-23% | FY27 |
| FY28 revenue | At least ₹300-350 crore, including structural acquisition | FY28 |
| Structural acquisition decision | Either close the deal or drop it | October 2026 |
| Beryl BD team contributions | BD team to start contributing to core business | Q3 FY27 |
| Beryl design cost arbitrage | India team execution to drive margin improvement | From next year onwards |
| PAT margin | Maintain 15-16% | Ongoing |
Key Metrics
| Metric | Q1 FY27 |
|---|---|
| Revenue | ~₹61 cr, on track for ₹240–250 cr in FY27 |
| EBITDA margin | 19%, vs ~11% in FY26; FY27 guidance revised to at least 20%, possibly 20–23% |
| PAT | ~₹9.3 cr (per an analyst's math, applying 15–16% PAT margin target to ~₹61 cr revenue) |
| PAT margin target | 15–16%, can move up once Beryl contributes |
| Civil work on hand (Mold-Tek Inc.) | $4.5 million, vs $3.5 million last year same time |
| MES work on hand | ₹0.11 cr, same as last year |
| Beryl revenue (FY26) | ~$0.54 million (per management's statement "0.54 crore"), with profitability around 8–9% |
| Beryl FY27 expectation | ~$0.55 million (per management's statement "0.55 crore") revenue, EBITDA margin around 8% |
| Beryl Q1 contribution | Around break-even, small losses; expected break-even in Q2, positive from Q3 |
| Beryl Master Purchase Order | $1 million, received July 2026 from Hillsborough County, spread over 12 months |
| New MSA (power distribution) annualized value | ~$1 million, starting August, with very good margins |
| Power substation design revenue (current) | ~$0.2 million |
| Power substation opportunity for Mold-Tek | $0.5 million to $1 million |
| MES team size | 50–60 people, down from 125–130 a year ago |
| Beryl design team (India) | 8 members now, target 15–20 by Oct–Nov |
| FX gain | ₹1–1.2 cr |
| FY28 revenue target | At least ₹300–350 cr, along with an acquisition |