Key Takeaways
- 40%+ growth guided for FY26: Management expects revenue growth of over 40% in the current financial year, anchored by a Rs.700+ crores order book and accelerating non-automotive diversification.
- Defense and marine are the margin story: These segments carry significantly higher margins than domestic operations and are projected to grow at a 45-50% CAGR, driving an immediate target of at least two percentage points of gross margin expansion this year.
- US tariff disruption is a tailwind: Since US-China tariff tensions escalated, OBSC has seen some of its largest order inflows and has hired a dedicated US ground team to capture the shift.
- The pivot from auto is structural, not cyclical: Automotive is targeted to fall from 98-99% of revenue two years ago to below 70% over three to four years, with defense, marine and aerospace filling the gap at higher margins.
- What to watch next quarter: Conversion of the aerospace RFQs into confirmed orders, the pace of defense order inflow, and whether the Gujarat plant timeline firms up.
The Diversification Bet: Defense, Marine & Aerospace
- Defense revenue trajectory: Revenue was barely Rs.28-30 lakhs last year; this financial year will close at almost three times growth, and management projects a 45-50% CAGR from the current base, with the potential to jump much faster if the pipeline converts.
- Order book visibility: The Rs.130 crores defense order book spans 10 years, translating to roughly Rs.13 crores annually, while the current monthly defense revenue run rate is Rs.1 crore, implying a ramp-up is already underway.
- Product development engine: Over the last two months, the company developed multiple products for defense systems, including some of Israeli origin and some for Indian PSUs, plus parts for the ammunition sector.
- Quality recognition as a moat: Receiving the BEL Zero Defective Award for the last quarter of FY25 is expected to drive further order flow and revenue flow from defense PSUs.
- Aerospace entry underway: AS9100D certification has been initiated; at least seven aerospace companies (five Indian including PSUs, two international) have visited in the last three months, with RFQs floated and some parts under validation, though no orders are confirmed yet.
- Marine adds another leg: Marine is grouped with defense as a high-margin segment and is part of the same 45-50% CAGR growth expectation.
Leekha: "You have invested in a fast growing high precision engineering Company that you'll see pivot from auto to defense to marine sectors with higher gross margins and we will continue to surprise you with ever increasing order books from the US, from the defense sectors in the quarterly updates that we are going to post out."
US Tariff Opportunity
- Order inflow acceleration: Since US-China tariff situations spun out of control, OBSC has seen some of its largest orders inflow, with many more under negotiation as American customers seek to de-risk supply chains away from China.
- On-the-ground investment: The company has hired a dedicated team in the US with a senior American business consultant to capture the shift, signaling this is a strategic priority rather than a one-off windfall.
- Export financing edge: A bill discounting scheme under discussion with global customers like ZF and Tenneco would reduce export payables drastically at interest rates on par with European banks, improving working capital and competitiveness.
Automotive: Still the Base, But Evolving
- Revenue mix shift in motion: Two years ago, automotive was 98-99% of revenue at less than Rs.100 crores; today non-automotive forms almost 15-20% of a larger pie, and automotive is targeted to fall below 70% over three to four years.
- EV is the growth vector within auto: Within the automotive segment, EV is expected to be roughly 25% of auto revenue in FY26, with non-EV at 60%. The largest single order, from Tata Toyo Radiator, is entirely for EV parts (aluminium precision milled components) at roughly Rs.250 crores total, with Rs.50 crores per year already nominated.
- Tata ecosystem deepening: Tata AutoComp is expected to become one of the largest customers very soon, with work across different legal entities; one additional business was recently converted, with scope to be disclosed once volumes are finalized.
- Tata-Tesla linkage: Tata is aggressively growing with Tesla, receiving new RFQs and business nominations from EV manufacturers, and those RFQs are being floated to OBSC, creating a potential indirect Tesla exposure.
- Gujarat plant commitment: A longstanding customer has asked OBSC to set up a dedicated facility in Sanand for shock absorber rods for commercial vehicles and EVs, with a confirmed letter of intent received; timeline and location details expected by the next update.
Leekha: "So in our line of work, nobody is placing orders for five years, so we don't get purchase orders for five years in our line of work, we get nomination letters and these nominations are binding documents and these binding documents are taken very seriously by both the buyer as well as the supplier."
Capacity, Capabilities & the Margin Path
- Forging in-housing: The company currently buys forgings from suppliers for defense applications; bringing this in-house will improve both supply chain control and margins, with machines being installed that will immediately serve existing defense customers.
- Investment casting doubling: The investment casting business, added three years ago, will more than double in revenue this year at very low incremental cost, contributing to margin expansion.
- R&D leap: The in-house R&D wing now has software capable of simulating any part being machined, cast or forged, a capability developed in the last three to four months with significant investment, shortening the product development cycle.
- Capacity fungibility as risk mitigation: All CNC and VMC machines are fungible, allowing the company to pivot across different parts and customers without dedicated high-gross-block lines for specific customers.
- Utilization headroom: At 84% capacity utilization in machining, there is physical space to add new machines with land and teams ready, so growth capex translates directly into revenue capacity.
- Margin expansion targets: An immediate target of at least two percentage points of gross margin expansion this financial year, with an internal target of 4-5% EBITDA margin expansion over three to four years, though management cautions these are ballpark figures that need refinement as the mix evolves.
Verma: "I think over a period of three, four years, we might see a 4%, 5% sort of margin expansion, but again these are ballpark high level numbers we are just putting out there, but we need to figure out as we move forward..."
The Long-Term Vision: Process Ownership
- From CNC shop to precision engineering platform: Management explicitly positions OBSC as a precision engineering company, not a CNC machining company, having diversified into investment casting and now adding cold and hot forging, with backward integration into its own steel supply.
- Stated ambition: The goal is to own multiple processes and be able to make any metal part in the long term, with plans to enter stamping and sub-assemblies very soon.
- Giga factory concept: The company plans to consolidate into a single integrated plant on five to six acres, described as a giga factory for components, with announcements expected very soon.
- Sub-assembly disclosure coming: Over H1 or H2 of FY26, the company will begin separately disclosing sub-assembly numbers, though management declined to provide a definitive growth number for sub-assemblies at this stage.
Leekha: "So essentially, the idea is to become a Company that owns multiple processes and can make any metal part in the long-term."
Financial Health & Capital Allocation
- IPO proceeds deployment: Of the Rs.20 crores unutilized IPO proceeds, roughly Rs.15 crores is allocated for capex in the third facility in Chennai and Rs.5 crores for the fourth facility in Pune; advances of 5-10% have been paid on machine orders, with the majority expected to be utilized within H1 FY26 and the remainder in H2.
- ROE normalization, not deterioration: The decline in ROE from roughly 40% to 18% is entirely due to the IPO-led increase in net worth; management expects ROE to recover to around 40% or upwards of 30% in two to three years as earnings grow into the expanded equity base.
- Tax rate stability: The tax percentage is expected to remain constant at approximately 25%.
- Revenue from current capacity: With the current installed capacity, revenue is expected to grow to around Rs.200-plus crores before additional capacity comes online.
- Forging plant revenue timeline: The new forging plant being set up will begin converting into revenue from the end of the second half of this year.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Revenue growth | Over 40% growth | FY26 |
| Gross margin expansion | At least 2 percentage points improvement | FY26 |
| EBITDA margin expansion | 4-5% expansion (internal target, ballpark) | Over 3-4 years |
| Automotive revenue mix | Fall below 70% of total revenue | Over 3-4 years |
| Defense/marine CAGR | At least 45-50% CAGR | Based on current order book and pipeline |
| ROE recovery | Return to ~40%, upwards of 30% | In 2-3 years |
| IPO proceeds utilization | Majority of Rs.20 crores deployed | H1 FY26, remainder in H2 |
| Forging capability | In-house forging introduced | Within 3 months |
| Forging plant revenue | Revenue conversion begins | End of H2 FY26 |
| Gujarat plant (Sanand) | Timeline and location confirmed | By next quarterly update |
| Investment casting revenue | More than double | FY26 |
| Revenue from current capacity | Grow to Rs.200-plus crores | No specific date; capacity-linked |
| Quarterly disclosures | Voluntary quarterly updates to continue | Ongoing |
Key Metrics
| Metric | Q4 FY25 |
|---|---|
| Total revenue (FY25) | ₹145 cr, highest ever |
| EBITDA margin (FY25) | ~19% |
| Revenue growth guidance (FY26) | Over 40% |
| Order book | ₹700+ cr, to be served over 6–7 years |
| Automotive order book | ~₹460 cr |
| Non-auto order book | ~₹250 cr |
| Defense order book | ₹130 cr, over 10 years, translating to ~₹13 cr annually |
| Defense monthly revenue run rate | ₹1 cr |
| Unutilized IPO proceeds | ₹20 cr, ₹15 cr for Chennai facility CAPEX, ₹5 cr for Pune facility |
| Tax rate expectation (FY26) | ~25%, expected to remain constant |
| Margin improvement target (FY26) | At least 2 percentage points |
| Medium-term margin expansion aspiration | 4% to 5% over 3–4 years |
| ROE | 18%-odd, down from 40%-odd pre-IPO due to networth increase |
| Defense revenue (FY25) | ~₹28–30 lakhs in FY24, closing almost 3x growth in FY25 |
| Workforce | ~90–95 permanent staff, ~700 blue-collar workers |