Key Takeaways
- Margin reset, recovery promised: Standalone EBITDA margin fell to 15.8% on commodity costs and export mix, but management expects a return to the 20%–25% range once pricing pressures ease.
- Core camshaft engine still accelerating: Volumes rose 20% YoY, machine shop utilization hit ~85%, and the order book extends at least five years out, even as new customer wins keep coming.
- The EV bet is now a physical product: The first fully electric sub-4-ton LCV is on Indian roads for customer clinics, with certified sales targeted for early 2023, though no volume or revenue commitments were given.
- Europe is the open wound: EMOSS grew 30% QoQ but faces severe component shortages and war-driven uncertainty; management sees no uptick and called the outlook "anybody's best bet."
- What to watch next quarter: Whether commodity costs actually ease to unlock the promised margin recovery, any certification milestone on the e-LCV, and any stabilization signal from European operations.
Standalone Margin & Mix
- The Q2 hit: EBITDA margin dropped to 15.8% because commodity prices rose and export sales mix shifted to 55%, which carries lower realizations than domestic business.
- The recovery path: Management expects margins to stabilize at 20%–25% once commodity pricing pressures ease, a level it calls both historical and sustainable. As machine camshaft sales increase, blended margins should improve.
- Utilization supports the case: Machine camshaft lines are running at ~85% utilization, cast camshafts at ~75%, leaving room to grow revenue inside existing assets without immediate capacity capex.
Karan Shah: "the early 20s is what it has been historically and that is where we expect it to be between 20% to 25%, once some of the commodity pricing pressures are eased. That's, I think, sustainable."
Camshaft Business & Order Book
- Volume growth intact: Total camshafts sold rose 11% QoQ and 20% YoY; machined camshafts grew 36% YoY even as they dipped 5.5% sequentially.
- Order book depth: Management cited good visibility for at least the next five years from both existing and newly onboarded customers, with the current run rate of machine and cast camshafts seen as sustainable, subject to macro crises and inflation in Europe and the US affecting vehicle sales.
- New business skew: Most new customer wins are for machine camshafts, while additional business from existing customers includes higher cast camshaft volumes.
- Parent growth: PCL India grew ~30% YoY, driven by better asset utilization across foundries and machine shops and the ramp-up of several new camshaft and non-camshaft projects awarded over the prior year.
Karan Shah: "I would like to reemphasize that we are getting new businesses, new orders from customers, not only in India but outside of India, for camshafts. And this will run much longer than we all presume or expect"
Diversification: Non-Camshaft & Non-Automotive
- Braking systems started: The standalone business has begun supplying non-camshaft products, mainly braking systems for commercial vehicles, marking a move into non-engine automotive components.
- Pipeline building: Work is ongoing on chassis components, brake components, and completely non-automotive products at subsidiaries MEMCO and MFT. New businesses being explored are also non-automotive.
- Contribution trajectory: Non-camshaft revenue will be a smaller number this year, with larger volumes and a larger share of total business expected next year or the year after.
- Capex discipline: New capex will be needed for machining non-camshaft products, but product selection criteria prioritize utilizing existing assets and avoiding significantly more capex at this point.
Karan Shah: "We have certainly moved away from this one product company which was camshafts in the past to a significantly diversified portfolio in terms of the products that we offer."
Electric LCV: India Opportunity
- Product status: The first fully electric sub-4-ton LCV is now being tested and used for customer demonstrations on Indian roads. Technology comes from EMOSS, and the company is in the final stages of commercializing the electric driveline and localizing the powertrain.
- Customer engagement begun: First customer clinics started last week with key customers who signed MOUs, showing early confidence. Certified, homologated vehicles are expected only in the early part of next year; no commercial sales have occurred yet.
- TCO proposition: Operating costs and maintenance costs are each 70%–80% lower than diesel. The additional delta cost of electrification is expected to be recovered in about two years, after which the vehicle delivers significant savings over its life.
- Go-to-market: Direct sales by the company for at least the first year or two to maintain complete control over critical process and development engineering; scaling via service partners and dealer partners across India will be considered later.
- Capex light for now: No significant capex required at this point; investments are being made using existing PCL resources and internal generations. A plan will be shared with stakeholders when put together.
- Volume questions deflected: Management declined to share how many vehicles have been built or how many are targeted for next year, citing the pre-certification, pre-commercial stage.
Karan Shah: "the operating costs are about 70% to 80% lower than that of diesel. The maintenance costs are also 70% to 80% lower than that of diesel."
European Operations: EMOSS, MFT & Uncertainty
- EMOSS top line: The business posted 30% QoQ growth but continues to face headwinds from a severe shortage of component supplies and general uncertainty in Europe.
- Order book resilience: Despite the environment, no customers have canceled business or indicated any slowdown or reduction in the order book. Management described a solid order book covering this year, next year, and parts of 2024, and expressed confidence it is a growing business.
- MFT stabilized but challenged: The business has stabilized during difficult times but still sees challenges ahead due to the ongoing crises in Europe.
- Supply chain response: The company is developing a supply base in India, especially for LCV components, and hopes some of those supplies can eventually serve the European business. Multi-sourcing is underway to avoid single-supplier or single-geography dependence.
Karan Shah: "it's really difficult to put a number or say what exactly is going to happen in the next three months or even a year because of the ongoing war, because of the ongoing component shortages, etc. So we don't see, or even the inflationary pressures that are there right now, but we don't see any uptick there, I think it's for us to be patient and get through this uncertain time in that part of the world."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Standalone EBITDA margin recovery | Return to 20%–25% range | Once commodity pricing pressures ease |
| Non-camshaft revenue contribution | Larger volumes, larger share of total business | Next year or the year after |
| Electric LCV commercial sales | Fully certified, homologated, Indian-made vehicle ready | Early 2023 |
| Electric LCV go-to-market | Direct sales by company, then scale via partners | First 1–2 years direct; partner scaling later |
| Solar plant commissioning | Physically mostly ready, awaiting permissions | Within the next month or two |
| EMOSS order book | Solid order book covering current year, next year, and parts of 2024 | Through parts of 2024 |
Key Metrics
| Metric | Q2 FY23 |
|---|---|
| Standalone total income | ₹163.8 cr, +37% YoY and +10.41% QoQ |
| Consolidated total income | ₹277 cr, +26.9% YoY and +14.98% QoQ |
| Standalone EBITDA | ₹25.9 cr, -22.74% YoY |
| Standalone EBITDA margin | 15.8%, vs historical 20–25%; commodity costs and product mix cited |
| Standalone PAT | ₹12 cr, PAT margin 7.38% |
| Consolidated EBITDA | ₹33.34 cr, -27% YoY |
| Consolidated EBITDA margin | 12% |
| Consolidated PAT | ₹9.94 cr, PAT margin 3.6% |
| Total camshafts sold | 0.23 cr units, +20% YoY and +11% QoQ |
| Machined camshafts sold | 0.08 cr units, +36% YoY and -5.5% QoQ |
| Cast camshafts sold | 0.15 cr units, +13% YoY and +22% QoQ |
| Machined camshaft utilization | ~85%, near peak; max practical low 90s |
| Cast camshaft utilization | ~75%, room to grow; max practical low 90s |
| EMOSS total income | ₹55.98 cr, +30% QoQ from ₹42.47 cr |
| MFT total income | ₹43 cr, +13.5% QoQ from ₹37.9 cr |
| MEMCO total income | ₹14.9 cr, +15% QoQ from ₹12.9 cr |