Key Takeaways
- April blip, not a demand break: Volumes fell 7% YoY after Q4’s unsustainable 25% surge, driven entirely by channel destocking when PVC import duty was suspended. May and June recovered strongly, and management is sticking to its 12–15% full-year volume growth guidance.
- Mix shift delivered a 600 bps margin jump: EBITDA margin hit 13% as the portfolio tilted away from low-margin agri pipe toward plumbing, CPVC and PPR, helped by better realizations despite the volume drop.
- MIP removes the PVC price floor uncertainty: The $766/ton minimum import price gives distributors a visible bottom, ending the fear-driven destocking cycle and supporting both realizations and restocking.
- The sales engine build-out is now operational, not hypothetical: DMS, SFA and direct retailer scheme spends are live, new channel partners were added aggressively, and DECILO manufacturing has begun, shifting the growth story from capex to execution.
- What to watch next quarter: Whether the promised inventory correction to 65–75 days materializes by September-end, the pace of debtor day reduction from 40 toward 30 days, and bathware’s path to the ₹25 crore quarterly breakeven run-rate.
The April Destocking Event
- What happened: Q4 FY26 saw 25% volume growth driven by heavy channel restocking ahead of an expected PVC price rise. When the government instead temporarily suspended the import duty on PVC resin until June 2026, PVC prices corrected sharply from early April, and distributors across the industry slammed the brakes on purchases to avoid holding falling inventory.
- Why it is not a demand signal: May and June saw strong recovery, and June/July stocking levels were more reflective of actual secondary demand. Management characterized the 7% quarterly degrowth as lower than both the industry average and peers, implying market share gain during the disruption.
- The tactical Q4 margin sacrifice was one-time: In Q4, the company deliberately gave up inventory gains to capture volume and share during a sharp raw material swing. That move is not repeating because similar price swings are absent and MIP now provides a floor.
Chheda: "The April degrowth of 7% is -- it doesn't keep me up at night because, like you rightly said, fourth quarter, we had delivered a 25% kind of a volume growth, which obviously is not sustainable."
Margin Drivers: Mix Over Volume
- 600 bps EBITDA margin expansion to 13% came despite the volume decline, driven entirely by product and segment mix. The volatile PVC price environment caused agri pipe, typically the heaviest Q1 segment at 30–35% of annual revenue, to degrow disproportionately, while plumbing and drainage held up better.
- Polymer mix improved with higher contribution from CPVC, PPR and PP relative to PVC, all of which carry structurally better margins. This mix effect was superior both to a typical Q1 and to Q4.
- Operating leverage from better realizations also helped, as the company did not chase volume with price concessions during the disruption.
- New product innovation is the next margin lever: Management is developing multiple new pipe products with gross margins significantly better than core PVC, and DECILO manufacturing has begun at Haridwar, targeting residential and commercial projects.
- CPVC price hikes are being passed through in a phased manner with 1–2 weeks’ notice to the channel, protecting margin without disrupting offtake.
The MIP Floor and Channel Behavior
- MIP at $766/ton removes the fear of a falling knife: Before MIP, distributors had no visibility on where PVC prices would bottom, so they destocked aggressively. With a clear floor now in place, they are willing to hold regular inventory levels, and June/July restocking reflected that confidence.
- Unorganized players are structurally disadvantaged: Smaller competitors rely on open-market resin purchases, where prices are now materially higher than Reliance contract prices or the inventory costs of large players. MIP widens that gap, creating a supply-security and pricing advantage for scaled manufacturers.
- No significant inventory gain or loss expected in Q2: While MIP provides a floor, higher-cost cargo is also arriving due to the prior month’s correction, so the net inventory impact should be neutral.
Chheda: "Now there is a very clear bottom of $766 per ton in PVC. So going forward, we will -- we should see good realizations and good growth because of this lack of uncertainty going forward."
The Sales Engine: Digitization, Distribution and New Products
- DMS and SFA are now fully deployed, giving the company complete visibility into secondary sales at the retailer level and enabling a pull-based demand model. Scheme spends are now targeted directly to retailers rather than pushed through the channel.
- Channel partner additions accelerated in the June quarter, with new partners recruited from both organized and unorganized players by identifying white spaces at the district and taluka level. Network expansion will continue aggressively in the September quarter.
- DECILO manufacturing is live at the Haridwar facility, and the polypropylene-based low-noise drainage system is already being installed in residential projects, hospitals and hotels. This is the first of a pipeline of new products aimed at lifting gross margins above core PVC levels.
- The growth strategy is agnostic to vertical: Management stated the sales engine must fire across both retail and projects because capacity utilization is low after completing a large capex cycle at Jaipur, Telangana and Begusarai. Market share is available as both larger and smaller competitors struggle.
Chheda: "Raw material scenarios could change, but these are things which will really help us build a robust sales engine. And this is not hypothetical anymore. This is being done on ground. And I am confident that this will play out in industry-leading growth going forward."
Working Capital: Inventory and Debtor Days
- Inventory spiked to 100 days against a stated guidance of 65–75 days, driven by two factors: precautionary raw material stocking during the period of supply insecurity, and volume planning that did not anticipate the 7% degrowth. Management expects an immediate correction to the guided range by the end of the September quarter and called the spike non-structural.
- Debtor days stand at 40 days, which management acknowledges is higher than peers and a key focus area. The target is to reduce this toward 30 days over the next couple of years using channel finance, the new pull-based demand model, and a firm commitment not to use credit as a growth lever.
Chheda: "We will not have any growth at the cost of using credit as a lever."
Bathware and Capital Allocation
- Bathware posted ₹13 crores in revenue with a ₹5 crore EBITDA loss in Q1. Management expects a much better Q2 and targets ₹25 crores in quarterly revenue by Q3, which would bring the segment very close to breakeven.
- Q1 capex of ~₹42 crores was primarily directed at completing the second tranche of the Bhuj plant takeover. The full-year capex plan remains unchanged from the May call, with the balance to flow over the next nine months.
- Utilization philosophy is deliberately conservative: Management targets 60–65% utilization as the comfort zone for hitting target ROCE, and views exceeding 65% as a signal that the next capex cycle is overdue. If the company hits the upper end of its 12–15% volume growth guidance for FY27, utilization will reach around 60%.
- ROCE historically ranged 15–20% or higher, and management sees no structural reason it cannot return to that range as volumes recover and capital allocation stays disciplined.
Chheda: "I'm not too fussy about reaching 70% - 75%. I think 60% - 65% we'll hit. If we hit more than that, I see it that we've been late with adding more capacity."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Volume growth | 12–15% for the full year | FY27 |
| EBITDA margin | 11–13% for the full year | FY27 |
| Inventory days | Return to 65–75 days from 100 days in Q1 | End of September quarter |
| Debtor days | Reduce toward 30 days using channel finance and pull-based model | Next couple of years |
| Bathware breakeven | Reach ~₹25 crores quarterly revenue, very close to breakeven | Q3 FY27 (December quarter) |
| Capacity utilization | Reach ~60% if upper end of volume guidance is achieved | FY27 |
| Capex plan | No change from May call; balance to flow in | Next 9 months |
Key Metrics
| Metric | Q1 FY27 |
|---|---|
| Revenue from operations | ₹609 crores, growth of 5% YoY |
| Volumes | 40,729 metric tons, degrew by 7% YoY |
| EBITDA | ₹77 crores, growth of 93% YoY |
| EBITDA margin | 13%, registering a 600 basis point growth YoY |
| Profit after tax | ₹34 crores, growth of 580% YoY |
| PAT margin | 6% |
| Volume growth guidance (FY27) | 12% to 15%, maintained |
| EBITDA margin guidance (FY27) | 11% to 13%, maintained |
| Bathware segment revenue | ₹13 crores |
| Bathware segment EBITDA | minus ₹5 crores |
| Working capital days | 71 days |
| Receivable days | 40 days |
| Inventory days | 100 days as of 30th June 2026; guidance remains 65 to 75 days |
| Payable days | around 70 days |
| Net cash | almost neutral on 30th June |
| Gross debt | around ₹120 crores, including long-term and short-term |
| Capex spent | around ₹40 crores, ₹42 crores, primarily on completion of second tranche of Bhuj plant takeover |
| Capacity utilization | around 52% to 53% |
| Project business mix | 25% to 30% of revenue, balance retail |