Key Takeaways
- Margin recovery despite revenue drop: Q4 EBITDA grew 6% YoY to ₹148 crores with margins at 19.4%, driven by stable input prices and better product mix, even as full-year PAT halved due to H1 inventory losses.
- ERP migration will make Q1 FY24 an anomaly: Transition challenges spilled from April into May, with operations only 70–80% back to normal; management cannot yet quantify the impact but insists underlying demand remains extremely strong.
- Volume growth engine intact, guided at 12–15% ex-Q1: FY23 volumes rose 13% to ~1.58 lakh MT; management expects a return to strong growth from Q2 FY24 and sees a 15–20% CAGR possible on a two-year view.
- Bathware and Bihar expansion signal the next leg: A new ~35,000 MT Bihar plant (₹150 cr investment, Q4 FY25 target) and a full Bathware range launching end-Q1 FY24 mark a broadening building-materials play, with Bathware expected to carry a ~₹15 cr annual cash loss initially.
- What to watch next quarter: The quantified Q1 FY24 ERP hit, the pace of volume recovery in Q2, and early dealer feedback on the Bathware launch.
Margin Structure & the PVC Cycle
- H1 FY23 was the damage: Unprecedented PVC price volatility, a ₹66/kg correction from April 2022 to a ~₹76/kg bottom in November, triggered sustained channel destocking and large inventory losses that crushed full-year PAT to ₹121 cr from ₹249 cr.
- Q4 showed what a stable cycle looks like: With input prices flat from December to March, EBITDA margin hit 19.4%, helped by better Fittings sales, improved CPVC and PPR performance, and cost efficiency.
- Structural margin floor raised: Over 4–5 years, the margin profile has moved from 9–10% to a 13–15% sustainable range, driven by product mix, pricing power, centralized manufacturing (Jaipur, Telangana, Bihar), and operating leverage. Management is conservative in guidance but aspirational for more.
- Inventory risk has reset: Management believes the business is back to a stable pricing regime where any quarterly inventory gain or loss evens out over four quarters; India is in a sweet spot with strong local PVC demand and weak global demand, limiting both sharp upside and downside.
- CPVC carries lower inventory risk: Prince runs just-in-time CPVC inventory from Lubrizol’s Dahej facility, so inventory loss exposure is minimal; CPVC price pass-through is slower than PVC in both directions.
Nihar Chheda: "I think we are back to that kind of a stable pricing regime. And I think India is in a sweet spot because India demand is strong, while global demand is weak, which means that in PVC, we don't see a very strong upside. But neither do we see a very strong downside because of local demand being strong."
Demand Environment
- Agriculture is the standout: Affordability has returned after two weak years, and all signals point to very strong agri demand; the strong season envisioned in prior quarters is now playing out.
- Real estate and infrastructure provide tailwinds: Positive real estate sentiment, affordable PVC rates, government focus on piped water access, and Swachh Bharat Mission are lifting infrastructure demand, now estimated at 10–12% of industry and expected to grow materially over three years.
- East India is a multi-year growth story: The region has been underdeveloped with a delayed urbanization cycle; strong volume demand over the past 3–4 years now justifies in-house capacity to enable range selling across plumbing, water tanks, and underground drainage.
- JJM is a bonus, not the thesis: Management reiterated that Nal se Jal is not a primary growth driver, only an added bonus; consistent on-ground demand is visible but the program will run for multiple years beyond FY25.
- Channel inventory is low for the right reasons: Strong end-product demand and the company’s inability to fully service it during the April–May ERP transition have kept channel inventory lean; this time, inventory is not correlated to pricing because demand is robust.
Nihar Chheda: "I think it is -- this time channel inventory is not directly correlated to pricing because demand is robust."
Volume Growth & Capacity Expansion
- FY23 volumes grew 13% despite a weak Q4: Full-year sales volume reached 1,57,717 MT vs 1,39,034 MT in FY22; Q4 volume was down 2%, which management dismissed as short-term noise against a long track record of industry-leading growth.
- Ex-Q1 FY24, 12–15% volume growth is the baseline: Q1 will be an anomaly due to the ERP migration, but end-product demand is robust and management expects primary numbers to reflect that from Q2 onward.
- Two-year CAGR of 15–20% is the ambition: Given the current demand environment and planned capacity additions, management sees this as definitely possible through FY25, supported by real estate revival and PVC affordability.
- Bihar greenfield adds ~35,000 MT: The ₹150 cr investment (including land and infrastructure) targets production by Q4 FY25 and will also manufacture DWC pipes for underground drainage; Phase 1 capex for the East facility is ₹75–80 cr for land, building, and utilities.
- East outsourcing will phase out: Outsourcing was a stepping stone for entry-level SWR pipes; in-house capacity will scale up, with complete dependence on in-house expected a couple of quarters after manufacturing begins.
Nihar Chheda: "I think, Shrenik, there is a few quarters of plus or minus volume growth does not really concern us. We have to see the long term."
Bathware & Building-Materials Diversification
- Launch is imminent: Vendors and designs are finalized, the core team including state heads and service engineers is in place, and the full range is set to launch toward the end of Q1 FY24, with a pan-India distributor launch at a mid-June dealer conference.
- No revenue targets, by design: Management explicitly declined to give Bathware revenue targets for FY24 or FY25, stating the focus is on product range, branding, and distribution network setup; internal targets exist but the public emphasis is on brand-building.
- Cash loss is budgeted at ~₹15 cr per annum: This is the expected investment phase cost while the business scales.
- Water tanks are doubling down: Revenue from storage tanks is targeted to double in FY24 from ~₹30 cr in FY23; operating margins in the segment are similar to pipes and fittings at 12–14%.
- New products are long-term bets: Low-noise polypropylene pipes and polypropylene surface drainage channels are in concept-selling phase and will take 4–5 years to deliver disproportionate returns, similar to the DWC launch in 2017–18.
- Building materials focus is structural: The value-added part of the portfolio will drive margin and brand equity improvement, while Agri remains key for operating leverage, cost absorption, rural market entry, and cross-sell.
Nihar Chheda: "I don't want to play the number game. I think I want to focus on brand and distribution and the results will be there for everyone to see."
ERP Transition & Q1 FY24 Disruption
- The migration is material: Prince is moving from a legacy ERP to a global system; implementation challenges spilled from April into May, with operations only 70–80% back to normal at the time of the call.
- Q1 FY24 primary numbers will be hit: Management cannot yet quantify the impact and is working to make up ground in the second half of the quarter, but has flagged that Q1 will be an anomaly.
- Demand is the silver lining: Across segments (Agri, plumbing, drainage, infrastructure) and geographies, end-product demand remains extremely strong; the company is confident growth will resume from Q2.
- Cost corrections were executed in April: Some pricing adjustments were made, though details were not quantified.
Nihar Chheda: "I think the silver lining in all of this is demand continues to be extremely strong across segments, across agriculture and building material and across geographies, north, south, west, east India, so we are confident of growth going forward."
Balance Sheet & Working Capital
- Net cash and debt-free: Prince maintained a net cash position of ₹158 cr as of March 2023 and remains long-term debt-free.
- Working capital cycle tightened sharply: Net working capital days improved from 68 to 57 days; inventory days dropped from 85 to 57; debtor days improved from 60 to 56 days.
- Debtor days control is a multi-year KPI: The Q4 uptick from 43 to 49 days was called immaterial; management wants stronger control over the next 2–3 years, visible in cash flow generation, and is using a channel financing program (100+ customers onboarded, ₹100+ cr sanction limit) as a lever.
- FY24 capex guided at ₹150 cr: Roughly half for the East/Bihar expansion and half for maintenance.
Nihar Chheda: "Control on debtor days is not something that can be achieved overnight and it's a process of multiple years."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Volume growth | 12–15% volume growth, excluding the anomalous Q1 FY24 | From Q2 FY24 onward |
| Volume growth (two-year view) | 15–20% CAGR volume growth possible | Through FY25 |
| Bihar plant operational | ~35,000 MT initial capacity, ₹150 cr investment | Q4 FY25 (internal target) |
| Bathware launch | Full range launch, pan-India distributor rollout | End of Q1 FY24 (dealer conference mid-June) |
| Bathware cash loss | ~₹15 cr per annum | FY24 and through investment phase |
| Water tank revenue | Double from ~₹30 cr in FY23 | FY24 |
| East outsourcing phase-out | Complete dependence on in-house manufacturing | A couple of quarters after Bihar plant begins production |
| EBITDA margin | Sustain 13–15% (conservative guidance) | Ongoing |
| FY24 capex | ₹150 cr (half East, half maintenance) | FY24 |
Key Metrics
| Metric | Q4 FY23 |
|---|---|
| Revenue | ₹764 crores, down YoY |
| Sales volume | 44,317 MT, down 2% YoY |
| EBITDA | ₹148 crores, up 6% YoY |
| EBITDA margin | 19.4%, expansion of 380 bps YoY |
| EBITDA margin (adjusted for inventory gain) | 16.1% (per an analyst's math) |
| PAT | ₹94 crores, up 7% YoY and 169% QoQ |
| Inventory gain | ₹25 crores |
| FY23 full-year revenue | ₹2,711 crores, vs ₹2,657 crores in FY22 |
| FY23 full-year sales volume | 1,57,717 MT, up 13% YoY |
| FY23 full-year PAT | ₹121 crores, vs ₹249 crores in FY22 |
| FY23 full-year inventory loss | ~₹125 crores (₹150 cr loss in 9M, ₹25 cr gain in Q4) |
| Net working capital days | 57 days as of March '23, improved from 68 days in March '22 |
| Inventory days | 57 days as of March '23, improved from 85 days in March '22 |
| Debtor days | 56 days as of March '23, improved from 60 days in March '22 |
| Net cash position | ₹158 crores as of March 2023 |
| Installed capacity | 3,15,000 MT as of March '23 |
| Telangana plant utilization | ~40% |
| Storage tank net sales (FY23) | ~₹30 crores |
| Storage tank operating margin | 12% to 14% |
| Bathware expected annual cash loss | ~₹15 crores per annum |
| CPVC market share | ~10% |
| CPVC portfolio contribution | 20% to 25% of overall portfolio, value terms |
| Overall market share (all polymers) | 6.5% to 7.5% |
| FY24 capex guidance | ₹150 crores (₹75–80 cr for East plant, ₹80–85 cr maintenance) |
| Channel financing sanction limit | >₹100 crores, with >100 customers onboarded |
| Channel financing utilization | 65% to 68% of sanction limit |
| FY23 advertising expense | ₹41 crores full year; ~₹12 crores in Q4 |
| Bihar greenfield plant capacity | ~35,000 MT initially, production targeted by Q4 FY25 |
| Bihar plant investment | ~₹150 crores, including land and infrastructure |
| FY24 volume growth guidance | 12% to 15%, excluding Q1 anomaly from ERP migration |
| Long-term EBITDA margin guidance | 13% to 15% |