Key Takeaways
- Revenue up 21%, but margins collapsed: Consolidated adjusted EBITDA fell 35% YoY in Q4, driven entirely by cost overruns in the Polish aluminum diecasting subsidiary, LUMEL ALUCAST.
- The diecasting problem is structural, not cyclical: More than half the portfolio is locked into long-term automotive contracts with no inflation pass-through, signed before Europe's energy and wage crisis. Renegotiation is underway but slow and adversarial.
- Solar inverters are the growth bet: Revenue jumped 142% QoQ (348% YoY) off a small base, but the business is only at breakeven. A redesign targeting 20-30% cost reduction is the path to profitability.
- Growth is being deliberately slowed to fix margins: Aluminum diecasting growth is cut from 20% to 10% YoY, and a planned EUR 3-4 million capacity expansion has been suspended. The focus is on cost and contract repair, not volume.
- What to watch next quarter: Whether the 6-9 month timeline to normalize diecasting margins holds, progress on renegotiating the second major automotive customer's contracts, and whether the solar inverter redesign delivers the promised cost reduction by year-end.
The LUMEL ALUCAST Margin Shock
- Root cause: LUMEL ALUCAST's EBITDA fell 65% YoY because of two 20%+ minimum wage hikes in Poland within FY24, persistently high energy costs, and new-project inefficiencies including high scrap, quality stabilization, and overtime from manpower shortages.
- Contract trap: Over 50% of the diecasting portfolio serves automotive OEMs under long-term contracts signed years ago with no provision for passing through inflation or labor cost increases. Customers are rigid because they in turn supply Stellantis, Volkswagen, BMW, and Mercedes, creating a slow, bureaucratic chain for any price revision.
- Renegotiation status: Agreement has been reached on 60-70% of contracts with the largest automotive customer, with some price corrections secured and some contracts slated for termination. Negotiations with the second major automotive group have not yet started.
- Termination is slow by design: Even where contracts are unprofitable, termination clauses are long because the customer must find an alternate supplier, and Rishabh must continue supplying until then.
- Capacity expansion halted: A planned EUR 3-4 million new production hall has been postponed. With growth moderated to 10% and possible contract exits, existing capacity is sufficient for 1-2 years. The hall is an 18-month build and can be triggered when conditions improve.
- No clients lost yet: No customers have been lost due to the cost escalation dispute. The company is phasing out one or two projects by mutual agreement while securing revisions on others.
Musalekar: "Unfortunately, they also go to their clients who can be Stellantis or who can be Volkswagen, who can be BMW, Mercedes. They go to those clients. It's a long process. They have to agree for that. So it's quite kind of, you can say, bureaucratic, rigid and kind of, I would say, it's one-sided in a way."
Solar Inverter: The Growth Engine That Must Become Profitable
- Explosive top-line, no bottom line: Solar string inverter revenue grew 142% QoQ and 348% YoY in Q4, but the business is at breakeven. The second-generation product, which is 50% of the mix, carries low margins typical of a new product in its initial phase.
- The cost-down plan: The product is being redesigned to cut manufacturing cost by 20-30% through sourcing electronic components from China, reducing the number of PCBs and components, and using less material. The target is to reach a profitable band by the end of this fiscal year.
- Revenue ambition is conditional: Management sees potential to reach INR 100 crores in about three years, but explicitly states there is no point in chasing that number if the business is not profitable. Pricing must also become acceptable in the market.
- Product pipeline supports the ambition: The NEO RADIUS 3-phase range is being developed up to 120 kW, and single-phase UNO inverters (2-10 kW) are in the final development stage to target the micro-installation market emerging from Indian government schemes.
Musalekar: "So we have potential to reach INR 100 crores in about three years time, but we, there's no point in reaching that if it is not profitable. So this is in our hand to reduce the cost and increase the prices and acceptable in the market."
Segment Performance & Portfolio Health
| Segment | FY24 Trend | Commentary |
|---|---|---|
| Electrical Automation & Metering | ▲ 17% YoY | Core business healthy; Q4 India standalone saw a small degrowth only because a 10-day SMT line shutdown for upgrades prevented billing of a strong order book. Backlog remains at 1.5-2 months. |
| Portable Test & Measurement | ▲ 31% YoY | Strong growth driver. |
| Solar String Inverters | ▲ 348% YoY | Explosive growth from a small base; breakeven currently, profitability targeted by year-end. |
| LUMEL SA (Electronics, Poland) | ▲ 28% YoY | Grew despite the European slowdown, driven by medium-voltage, industrial automation, and green energy penetration. Successfully passed on cost increases to customers. |
| LUMEL ALUCAST (Diecasting, Poland) | ▼ EBITDA –65% YoY | Margin collapse from wage and energy costs locked into unrevised automotive contracts. Growth deliberately slowed to 10% to focus on repair. |
| China Business | ▲ 19% YoY | First year of recovery post extended COVID shutdowns. Also serves as a sourcing hub for electronic components to reduce raw material cost. |
| UK Business | ▼ –1.4% | Decline is contract-specific and lumpy; some projects come thick and fast in certain years. |
- New products are contributing: Products added in the last two years contributed approximately 10% of the electronics segment's top line. 19 products were added in FY24, with 20 more in the pipeline for FY25.
- India standalone Q4 blip is temporary: The Q4 degrowth was not a demand issue but a supply-side bottleneck: a 10-day SMT line shutdown to add modules prevented conversion of the order backlog into billing. Spillover is expected in Q1, though not necessarily a large number.
Capacity Build-Out & Strategic Investments
- Nashik expansion underway: MIDC approval was granted one month ago for a 6-storied building to double some existing capacities in core business segments. The old building has been demolished; construction should finish by end of FY25, with production starting Q1 of the next financial year.
- Why build when utilization is below 50%: Average utilization masks bottlenecks. The SMT line is already at 80%, and capacity must be built ahead to support the INR 1,000 crore revenue aspiration over the next 2-3 years.
- New SMT lines in Poland and India: A new SMT line has been ordered for LUMEL SA in Poland and will be operational within this financial year, expanding EMS and electronic manufacturing capacity. A state-of-the-art SMT line with clean room, online AOI, and X-ray machine is being finalized for India.
- Cost-side investments: A 1.3 MW rooftop solar installation is planned at the LUMEL ALUCAST plant (costing approximately INR 14-15 crore, including roof reinforcement) to reduce energy costs. The diecasting hall expansion has been postponed in favor of this.
- Inorganic exploration: Due diligence has been completed for a potential acquisition in the aluminum diecast segment in India. Conditions precedent are being investigated; a financial and commercial decision will be made in the coming six months.
- R&D expansion: The company is exploring setting up a 6th R&D center at the IIT Mumbai campus for cutting-edge research. A purchase desk and a full-time area sales manager have been established in China to support component sourcing and sell LUMEL SA products locally.
Margin Recovery Path
- The drag is concentrated: The consolidated margin suppression is primarily from Poland operations, specifically LUMEL ALUCAST. The electronics business (LUMEL SA) performed well on profit and was able to pass on cost increases.
- Q4 EBITDA walk-down: Consolidated adjusted EBITDA fell 35% YoY, driven by an INR 8.8 crore increase in employee costs from Poland's minimum wage rises, an INR 2.8 crore increase in manufacturing costs from higher power and subcontracting expenses, and margin dilution from new projects.
- Recovery timeline: Management expects it will take 6 to 9 months (2-3 quarters) to correct the diecasting margin situation, with normalized numbers expected by the next financial year. The target is double-digit EBITDA (minimum 10%) for LUMEL ALUCAST by end of FY25.
- Consolidated target: The company is targeting around 15% adjusted EBITDA at the consolidated level for FY25, with confidence in 20% EBITDA for the electronics business. The earlier 18%+ guidance was revised specifically due to the Poland diecasting issues.
- Levers being pulled: Contract renegotiation and selective termination, cost reduction through solar installation, moderating growth to reduce strain on operations, and redesigning the solar inverter for lower manufacturing cost.
Goliya: "Aluminum has been a slight disruption. Even last year was good, but this year, because of the reasons Dinesh explained so well, has been aberration. It may take 6 months to, 6 to 9 months to come back to normal."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Consolidated revenue growth | 20-25% YoY top-line growth | FY25 |
| Consolidated adjusted EBITDA margin | ~15% (excluding ESOP cost) | FY25 |
| Electronics business EBITDA margin | 20% | FY25 |
| LUMEL ALUCAST EBITDA margin | Double-digit (minimum 10%) | By end of FY25 |
| LUMEL ALUCAST margin normalization | Return to normal profitability after 6-9 months of correction | By next financial year |
| Aluminum diecasting revenue growth | Moderated to 10% YoY (from ~20%) | FY25 |
| Solar inverter profitability | Product in profitable band after cost-redesign | By end of FY25 |
| Solar inverter revenue potential | INR 100 crores, conditional on profitability | In ~3 years |
| Nashik facility construction | Production operational | Q1 of next financial year (FY26) |
| New SMT line, Poland (LUMEL SA) | Operational | Within FY25 |
| Diecasting acquisition decision | Financial/commercial decision after CP investigation | In ~6 months |
| INR 1,000 crore revenue aspiration | From current ~INR 700 crores | FY26/FY27 |
| India standalone business | 18-20% top-line growth, 20% EBITDA margin | FY25 |
Key Metrics
| Metric | Q4 FY24 / FY24 |
|---|---|
| Consolidated revenue growth | 21.1% YoY for FY24 |
| Q4 revenue growth | 2% QoQ |
| Consolidated adjusted EBITDA | ₹21.4 cr in Q4, down 35% YoY |
| Consolidated adjusted EBITDA margin | 12% in Q4 FY24 |
| Consolidated PBT | ₹11.2 cr in Q4, down 42% YoY |
| Consolidated FY24 adjusted EBITDA | ₹95 cr, up 14% YoY |
| Consolidated FY24 PBT | ₹51.1 cr, down 16% YoY |
| India standalone revenue | ₹224.6 cr in FY24, growth of 14.6% YoY |
| LUMEL SA (electronics, Poland) revenue | ₹174.5 cr in FY24, growth of 28% YoY (38% per CFO) |
| LUMEL SA EBITDA | ₹33.1 cr in FY24, growth of 225% YoY |
| LUMEL ALUCAST revenue | ₹270.9 cr in FY24, growth of 20% YoY |
| LUMEL ALUCAST EBITDA | ₹9.5 cr in FY24, degrowth of 65% YoY |
| Solar inverter revenue growth | 142% in Q4 YoY; 348% for full year FY24 |
| Net cash and cash equivalents | ₹99.89 cr as on 31 March 2024 |
| Cash flow from operations | ₹77.69 cr in FY24 |
| ESOP cost | ₹3.4 cr in Q4 FY24 |
| FY25 ESOP expense guidance | ₹7.5 cr |
| FY25 consolidated EBITDA margin guidance | ~15% |
| LUMEL ALUCAST FY25 revenue growth guidance | ~10%, moderated from 20% |
| India standalone FY25 revenue growth guidance | ~20% |
| India standalone FY25 EBITDA margin guidance | ~20% |
| Solar inverter FY24 revenue | ₹17 cr |
| Order book | 1.5–2 months consistently, growing month after month |