Key Takeaways
- Electronics strength offset by die-casting drag: Consolidated revenue grew 5% YoY in Q4, but the 36%-of-revenue die-casting division operated at breakeven EBITDA, pulling consolidated adjusted EBITDA margin to 8.9% for FY25.
- Die-casting turnaround is a deliberate, painful reset: Management sacrificed ~20% of potential top-line by walking away from loss-making legacy auto contracts, and is now renegotiating prices, reducing auto exposure, and hunting non-auto projects, a process that will take 6–12 months to show in revenue.
- Electronics business is the growth engine, and management is "damn sure": Rishabh India standalone grew >15% in Q4, Lumel SA EBITDA margins hit 23%, and the combined electronics business is guided to 15–20% growth in FY26, driven by new products, EMS scaling, and domestic infrastructure demand.
- A 5-year product roadmap and capacity build are underway: Two new buildings, two new SMT lines, a SCADA software acquisition, and a pipeline of solar, power quality, and metering products signal a company investing for a step-change, not just a cyclical recovery.
- What to watch next quarter: Whether Lumel SA’s Q4 flatness was truly a one-quarter blip, whether die-casting monthly revenue can climb toward the ₹20 crore target, and whether the new SMT line in Nashik converts its technical qualification into commercial EMS orders.
The Die-Casting Reset: Why It Hurts and When It Heals
- Auto exposure was the problem: 50% of the die-casting business served automotive customers under pre-COVID legacy contracts that had no escalation clauses except on raw material, severely constraining pricing flexibility and crushing margins.
- Management chose to shrink rather than bleed: The division could have grown sales turnover by 20% in FY25, but those contracts were loss-making. After 6 months of hard negotiation, the biggest automotive client accepted price increases and a limited supply contract.
- European auto turmoil is real and local: Three die-casting plants closed within 50 km of the company’s facility. German automakers have stopped shipping to America due to tariff uncertainty, and Chinese EV competition is pressuring the entire supply chain.
- The strategy is to shrink auto to 20–25% of the portfolio: Management is telling auto customers it plans to exit, while paradoxically asking for more business as competitors close, creating a consolidation opportunity if the company can sustain through the transition.
- Non-auto die-casting is intact and profitable: The other 50% of the business, serving industrial automation, electrical, and lighting customers like Siemens, ABB, Endress+Hauser, and Danfoss, is targeted for 4–5% organic growth.
- New project timelines are long: Auto customers transitioning out will take 6 months to 1 year to launch new projects. New non-auto customer acquisition requires a 6-month audit and approval, then another 6 months to 1 year for project launch.
- The profitability target is explicit but undated: Management anticipates positive EBITDA by end of FY26, targeting monthly revenue of around ₹20 crore with a similar cost base. The full-year FY25 EBITDA loss was ₹15 crore, with a net loss of ₹25 crore after depreciation, withholding tax provisions, and finance costs.
Dineshkumar Musalekar: "Everybody is closing down or shutting down, and in a vicinity of 50 kilometers from here, there are three die-casting plants, which are closed down. So it's a fact. It's a reality, if you are in touch with auto industry, what is happening in Europe, big, small, all companies are suffering."
Electronics: The Growth Engine
- Rishabh India is firing: Standalone revenue grew >15% in Q4 FY25 both QoQ and YoY, with domestic sales growing 19% for the full year, driven by governmental infrastructure development initiatives. Adjusted EBITDA margin stood at 16.8% for FY25.
- Lumel SA delivered margin expansion despite Q4 top-line flatness: Full-year revenue grew 14% YoY with EBITDA margins expanding 138 bps to 20.4%. Q4 EBITDA grew 74.2% with margins at 23%, reflecting improved operating efficiency even as revenue was nearly flat.
- The Q4 flatness is called temporary: Management attributes the slowdown to post-Trump and war-related uncertainty causing some projects to go slow, calling it "just 1 quarter thing" and expecting a return to ~15% growth.
- Combined electronics guidance is aggressive: Management is "damn sure" of 15–20% growth in the electronics business (India + Lumel SA) for FY26. Rishabh India domestic is expected to grow 20%, exports 12–13%, and Lumel SA conservatively 15%.
- A 5-year product roadmap backs the optimism: Created at a week-long workshop in Cyprus with all R&D and sales heads, the roadmap projects incremental revenue equivalent to nearly 50% of total electronic sales when all products mature. Five R&D centers have been assigned as centers of excellence.
- New product pipeline is concrete: Solar UNO single-phase inverter rolling out in Q1 FY26; next-generation midrange solar inverter NEO; medium voltage current and potential transformers within 1 year; advanced full class A power quality analyzer ND50 by end of FY26; next version of chip 5 medium voltage protection relay with EU grant; Byram energy meters with LoRa for the US market; DIN meters in three variants for Europe.
- MICROSYS acquisition adds software: Acquired in August 2024, the Czech Republic-based SCADA software company helps offer customers a complete solution alongside high-end hardware products.
Dineshkumar Musalekar: "it's just 1 quarter thing, and we will get back to the kind of 15% growth again."
EMS: The Volume Play with a China-Substitution Angle
- EMS revenue doubled in FY25: The business saw 100% year-on-year growth, supported by two new state-of-the-art SMT lines, one in Nashik and one in Poland.
- The new Nashik line is a capability leap: It can produce laptop-grade PCBs with 16 layers, many controllers, and IGBTs, running at 180,000 components per hour versus the previous two lines combined at 96,000. A 200-part pilot batch has already proven technical capability.
- The commercial target is box builders importing from China: Management is now targeting box builders who currently buy PCBs from China, positioning the new line as a high-quality alternative.
- Margin profile is thinner but strategic: EMS carries 20–25% gross margin versus 50–60% on own products. The strategy is to mix high-margin own products with lower-margin high-volume EMS to keep capacity busy, aiming for at least one project spike per quarter.
- Poland EMS is already integrated: Products like the Ono co-driver device, sold on Amazon, are made entirely from PCB to box assembly at Lumel SA, contributing to the 100% EMS growth.
Dineshkumar Musalekar: "We don't enjoy 50%, 60% gross margin like we have on our products, but it's a volume business with maybe 20%, 25% gross margin."
International Subsidiaries: A Mixed Bag
| Subsidiary | Performance | Outlook |
|---|---|---|
| Lumel SA (Poland) | ▲ Revenue +14% YoY, EBITDA +22.3%, margins 20.4%. Q4 flat on top line but EBITDA +74.2%. Won three prestigious Polish awards. | Return to ~15% growth expected; Q4 flatness called temporary. |
| Lumel Alucast (Poland) | ▼ Revenue –2.7% YoY, EBITDA loss ₹15 cr, net loss ₹25 cr. Q4 EBITDA breakeven. | Positive EBITDA targeted by end of FY26; auto exposure being cut from ~45% to 20–25%. |
| China | ▲ Revenue +20% YoY; EBITDA near breakeven. | Results expected from R&D investments made over last 2 years. |
| USA | ▲ Revenue +60% YoY, closed year at $2 mn, healthy margins. | Similar growth expected until reaching $5–6 mn. |
| UK | ▬ Top line flat; EBITDA slightly negative. | "This year should be good." |
- European auto policy could swing either way: EU regulations penalize non-EV production heavily, but policymakers are debating rolling back green policies due to company closures and unemployment. A rollback would be an opportunity for the die-casting business.
Dineshkumar Musalekar: "The European political group is seriously thinking about rolling back all those EV policies or green policies which they've had because they're having companies closing down, people being unemployed. And this may roll back and if that roll back, is another opportunity for companies like us."
Capacity, Capex, and Organizational Build-Out
- Two new buildings under construction in Nashik: F-31 adds 67,000 sq ft to an existing 98,000 sq ft; C-6 adds 82,000 sq ft to an existing 38,000 sq ft, a 110% increase in built-up area. Total capex of ₹50–60 crore, with no capex being added at Lumel Alucast.
- A 1.5 MW solar plant was commissioned at the Lumel Alucast plant, supporting cost and sustainability goals.
- Organizational strengthening is broad-based: A new COO with two decades of EMS/electronics experience, a new head of international sales, a new head of solar business in India, a head of procurement in China, a quality head, and an R&D head for electromechanical have all been appointed. Mr. Nishant Dudhoria was appointed as Additional General Manager to oversee business strategy, finance, and public relations.
- Product approvals are in hand: European and UL certifications for the American market have been received, supporting the export push.
- Margin profile is expected to remain stable: Management states the product mix spread is wide, the company has control on selling prices, and it can increase prices 5–10% on selected products when needed while still growing revenue. No significant margin change is expected from the new SMT line interventions.
Narendra Goliya: "we all know, however, good you are today and if you don't innovate, if you don't develop new products for the future, then today's products cannot last you for more than a couple of years, and we are really involved in that."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Electronics business growth | 15–20% revenue increase (India + Lumel SA combined) | FY26 |
| Rishabh India domestic growth | 20% revenue growth | FY26 |
| Rishabh India export growth | 12–13% revenue growth | FY26 |
| Lumel SA revenue growth | ~15% (conservative) | FY26 |
| Die-casting EBITDA | Positive EBITDA | By end of FY26 |
| Die-casting monthly revenue target | ~₹20 crore with similar cost base | Undated (turnaround underway) |
| Die-casting auto exposure | Reduced from ~45% to 20–25% of portfolio | Undated (transition in progress) |
| USA revenue | Grow until reaching $5–6 million | "Coming few years" |
| Solar UNO inverter launch | Roll out in Q1 | Q1 FY26 |
| ND50 power quality analyzer | Launch | By end of FY26 |
| Medium voltage CT and PT | Roll out | Within 1 year |
| Nashik building capex | ₹50–60 crore for two new buildings | Under construction |
Key Metrics
| Metric | Q4 FY25 |
|---|---|
| Consolidated revenue | ₹187.5 cr, +5% YoY |
| Consolidated revenue (full year FY25) | ₹720.3 cr, +4% YoY |
| Consolidated adjusted EBITDA | ₹22.1 cr, -5.1% YoY; includes ESOP expense of ₹0.9 cr |
| Consolidated adjusted EBITDA margin (full year FY25) | 8.9% |
| Consolidated PAT | ₹6.2 cr, +163% YoY; PAT margin improved 200 bps to 3.3% |
| Standalone revenue (Rishabh India) | ₹68.4 cr, +15.8% YoY |
| Standalone adjusted EBITDA margin (Rishabh India) | 21.8% |
| Standalone PAT (Rishabh India) | ₹8.9 cr, +109.7% YoY |
| Lumel SA revenue | ₹43.1 cr, +0.6% YoY |
| Lumel SA EBITDA margin | 23.0%, improved 971 bps YoY |
| Lumel SA PAT | ₹7.3 cr, +108.9% YoY |
| Die-casting revenue | ₹74.5 cr (74.5 crore), -1.8% YoY |
| Die-casting adjusted EBITDA | ₹0.2 cr, breakeven margin of 0.2%, improved from -3.7% in prior comparable period |
| Die-casting net loss | ₹5 cr |
| Net cash and cash equivalents | ₹102.2 cr as of 31 March 2025 |
| Cash flow from operations (full year FY25) | ₹65 cr |
| EMS business growth (full year FY25) | 100% YoY |
| U.S. market revenue (full year FY25) | $2 million, +60% YoY |
| China operations growth (full year FY25) | 20% YoY |
| Rishabh India domestic sales growth (full year FY25) | 19% |
| Die-casting as share of consolidated revenue | 36% |
| Automotive share of die-casting portfolio | 40-45%, targeting reduction to 20-25% |