Key Takeaways
- Tax change flatters PAT, not operations: A switch to the new tax regime cut the effective rate from 34.94% to 25.17%, lifting PAT to ₹50 crore; underlying EBITDA margin held steady at >24% on flat QoQ revenue.
- Revenue missed the order-book run rate: Q1 monthly sales averaged ~₹95 crore against an indicated order book of ₹115–125 crore per month, held back by customer forecast changes, raw material availability and container shortages that left 9–10 containers unshipped at quarter-end.
- Gross margin dipped on lag, not trend: A ~200 bps QoQ gross margin decline reflected the lagged pass-through of steel prices and product mix; management called it non-recurring and expects commodity stability or decline from June onward.
- Customer expansion is the growth engine: New plants added by SKF, Timken and a US industrial bearing maker are expected to contribute more than ₹200 crore in revenue from next year, with bearing ring supply normalising fully from October.
- What to watch next quarter: Whether the 9–10 unshipped containers convert to Q2 revenue, the pace of bearing ring destocking recovery at overseas customers, and any margin impact if steel prices fall faster than the ₹4/kg decline seen so far.
Revenue & Order Book
- Flat sequential top line: Q1 FY23 revenue of ₹287 crore was nearly flat QoQ (₹288 crore in Q4 FY22) and up ~27% YoY over ₹227 crore in Q1 FY22.
- Order book implies acceleration: Management cited a monthly run rate of ₹110–115 crore for the next three months, implying a ₹325–340 crore order book, and expects to maintain ₹110–150 crore average monthly revenue at least for the fiscal year.
- Shipment bottleneck: 9–10 containers of finished components could not be shipped by end of June due to container unavailability, directly contributing to the gap between order book and realised revenue.
- Bearing ring soft patch: A couple of percentage points of bearing ring revenue were lost in Q1 because a few overseas customers carried excess inventory and destocked; supply of new batches resumes from the second half of August and is expected fully on track from October.
- Auto components running hot: Auto component business grew ~58–60% YoY, driven by 70–75% overseas exposure, new customer development and supply to new plants of existing customers; the quarterly run rate of ~₹140 crore is expected to continue or increase.
Hiren Doshi: "If something will come up, which is beyond our control, and even may be economical cyclical then definitely we are, you know, just increasing our customer base. We are adding new customers and even after you know, adding up a particular new customer who might be working at their 50% production capacity or something, but for me, it would be completely new business and that would at least continue or maintain my momentum."
Customer & Capacity Expansion
- SKF deepening: SKF added four new plants recently (samples ongoing); the company now supplies SKF's eighth plant across Italy, France, Romania, three US plants and two India plants (Chennai, Jamshedpur), with Poland added most recently.
- Timken and new US entrant: Timken added a Poland plant and is expanding its Chennai plant for industrial and fibre bearings; one new industrial bearing manufacturer from the US started placing orders, with bulk supply expected from October onward, and another couple of US bearing manufacturers have recently started.
- Schaeffler tailwind: Schaeffler indicated plans to reach ₹10,000 crore revenue in the next 3–4 years and is expanding industrial bearing capacity in India, creating a potential outsourcing opportunity.
- Industrial bearing outsourcing theme: Management sees a structural increase in outsourcing from global bearing companies for industrial bearings, with SKF adding plants in Germany, Bulgaria and Mexico, and Timken and Schaeffler expanding in India; this also opens an import substitution opportunity.
- Capacity headroom: Capacity utilisation stands at 63–65%, leaving significant room to absorb new orders without major capex in the immediate term.
Manesh Madeka: "Now we are supplying them in their eighth plant. Italy, France, Romania, USA three plants India, Chennai, Jamshedpur so slowly, slowly they allow recently they have added Poland so based on our performance they keep on adding their new facility."
Margins & Costs
- EBITDA margin resilient: EBITDA margin held at >24% in Q1 FY23, same as Q4 FY22 and above the full-year FY22 average, despite the gross margin dip; management noted the FY20–21 average was ~23%.
- Gross margin pressure explained: The ~200 bps QoQ decline came from the lag impact of commodity and steel pricing plus product mix; management stated it is not a consistent trend and no substantial reduction in gross margin is expected.
- Commodity price trajectory: From June onward, management expects stability in commodity pricing and a possible decline in the current month; the steel price reduction so far is only ₹4 per kilo against a >40% increase over the prior 18 months.
- Inventory gain and loss mechanics: Overseas business benefits from inventory gains when raw material prices rise, because inventory is carried at various stages (semi-finished, finished, in-transit); a substantial price decline would reverse that effect and hurt margins, with quarterly repricing for overseas suppliers and monthly for domestic.
- Other expenses well controlled: Other expenses as a percentage of sales remained steady YoY and declined sequentially, helped by better absorption from higher capacity utilisation, own windmills, a 1.5 MW rooftop solar plant and an in-process ground-mounted solar project.
Manesh Madeka: "See that reduction is only, you know, the increase in last one and half happier was more than 40%, but now the reduction is only Rs. 4 per kilo."
Balance Sheet & Capital Allocation
- Debt coming down fast: Net debt reduced from ₹203 crore (March 22) to ₹186 crore (June 30) to ~₹140 crore currently, driven by healthy operating cash flow and working capital utilisation; long-term debt is also being reduced monthly.
- Return on Equity strong: RoE was consistent at 24% in Q1 FY23 versus 21% in FY22, annualising to ~27.5%.
- Cash usage plan: Management intends to use cash for a combination of rewarding stakeholders and accumulating for capex planned over the next 2–2.5 years; the company also intends to move out of bank debt entirely.
- Gondal land liquidation: The plan is to liquidate the Gondal land parcel; no development or expansion is planned there, and it will not affect future capex plans as it is not near the factory; being a large parcel, the sale may take some time.
Hiren Doshi: "We would like to assure the stakeholders that company is in process of, you know, maintaining their margin or increasing onward and even increasing the overall revenue by just utilisation of capacity, the spare capacity and company even intends to move out of the bank's debt... we would be having quite healthier numbers in the coming quarters subject to any kind of, you know, abnormal factors or maybe a huge impact from US, Europe or something which is beyond anybody's control."
EV & Product Mix
- EV supply chain is export-only for now: 100% of EV and hybrid bearing rings are supplied to overseas bearing manufacturers; domestic bearing manufacturers have not yet started in this segment.
- Better unit economics: EV components carry better margins than regular auto components because of value-added processes and higher precision requirements; they also command higher per-piece revenue and higher market share potential.
- No PLI eligibility: The PLI scheme is not available to the company as of now because it is designed for new large expansions, which the company does not have.
Hiren Doshi: "No definitely it would be having better margin compared to the you know, the regular products because as our MD just informed it is having certain value added processes certain you know, highly precision level output is required. So, there're definitely the margins are better on higher side compared to the regular kind of auto components."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Revenue growth | 20–25% YoY for FY23 | FY23 |
| Monthly revenue run rate | Maintain ₹110–150 crore average per month | At least for the fiscal year |
| Bearing ring supply normalisation | Fully on track from October; partial recovery from second half of August | October 2022 |
| New customer revenue contribution | More than ₹200 crore from SKF, Timken and US industrial customer combined | From next year (FY24) |
| Debt reduction | Move out of bank debt entirely | Barring abnormal external factors; no fixed date |
| Capex cycle | Planned capex down the line | 2–2.5 years out |
| Commodity price outlook | Expect stability from June, possible decline in current month | Near term |
Key Metrics
| Metric | Q1 FY23 |
|---|---|
| Revenue | ₹287 cr, +27% YoY; exports ₹155 cr, domestic ₹132 cr |
| EBITDA | ₹70.9 cr, margin >24% |
| PBT | ₹61 cr |
| PAT | ₹50 cr, vs ₹39 cr in Q4 FY22; benefited from adoption of new tax regime |
| Effective tax rate | 25.17%, down from 34.94% under Section 115BBA |
| Revenue growth guidance (FY23) | 20–25% over FY22 revenue of ₹1,017 cr |
| Order book | ₹325–340 cr for next three months, monthly run rate of ₹110–115 cr |
| Net debt | ₹186 cr as of June 30, down from ₹203 cr in March 22; currently ~₹140 cr |
| Debt-to-equity ratio | <0.25, down from 0.37 in March 22 |
| Return on Equity | 24% in Q1; annualised ~27.5% |
| Capacity utilisation | 63–65% |
| Revenue mix: bearing rings vs auto components | 52% bearing rings, 48% auto components |
| Revenue mix: exports vs domestic | 60% exports, 40% domestic |
| EV and hybrid revenue contribution | 4.2% of total revenue |
| Domestic bearing rings market share (forging route, addressable segment) | 30–33% |
| Scrap revenue | ~₹20 cr |