Key Takeaways
- Revenue dipped but margins held: Revenue fell ~3–3.5% sequentially to ₹300 crore, yet EBITDA margin inched up to 24.4% on cost control and operational forex gains.
- A deliberate portfolio rotation is underway: Bearing ring share dropped from ~60% in FY24 to 47%, while auto components rose to 53%, absorbing a ~₹45 crore H1 decline from one bearing customer group with new wins of ₹80–100 crore.
- The bearing ring reset is not over: Geopolitical weakness and stalled industrial activity in Europe and the US drove the decline; management expects improvement only from Q1 FY26, though customer shifts from Korea to India could help within 3–5 months.
- Mid-teen growth conviction for FY26: Management is "very much confident" of at least mid-teen growth next fiscal, anchored in customer dialogues, new program ramp-ups, and market share gains in the US, Mexico, and Europe.
- What to watch next quarter: Whether the Q4 improvement materializes as promised, the pace of new bearing ring customer conversions from Korea, and any additional Right of Recompense charge by quarter-end.
Revenue & Segment Shift
- Sequential decline, resilient profitability: Q2 revenue of ₹300 crore fell ~3–3.5% QoQ; EBITDA margin improved slightly to 24.4% (from 24.2%), aided by cost control and ₹3.5–3.7 crore in realised operational forex gains. Without those gains, EBITDA was 22%.
- Bearing ring share collapsed: Bearing rings fell from ~60% of revenue in FY24 to 47% in Q2 FY25, driven by a single customer group (six plants across Europe, India, and the US) whose non-automotive bearing demand dropped ~₹45 crore in H1, annualising to ₹70–90 crore.
- Auto components filled the gap: Auto component share rose to 53%, with ₹80–100 crore in new H1 orders offsetting the bearing ring loss. Without these wins, revenue would have been "much, much lower."
- New program ramp-ups were slow: Auto component orders awarded last year were supposed to ramp quickly but were deferred or started slowly due to uncontrollable factors like ocean freight cost increases for Europe and the US.
- EV demand softened, ICE returned: EV growth from the previous fiscal has "degraded" in the current year; internal combustion engine parts are growing again and are the main source of new wins.
- Domestic bearing rings also weakened: Domestic bearing ring revenue declined from ₹192 crore to ₹174 crore in H1; Schaeffler's growth came from industrial components and railway, while their automotive and traditional bearings declined.
- No customer lost: Management stated explicitly that "we have not lost a single customer," framing the bearing ring decline as a demand problem, not a competitive loss.
Madeka: "…immediately within another maxim 3 to 5 months We are going to get some more They are shifting their requirement from Korea to India."
Demand Environment & Geopolitics
- Industrial activity stalled in advanced economies: The bearing ring decline is rooted in near-zero industrial development, repairs, renovation, and infrastructure activity in Europe and the US, driven by geopolitical factors.
- Customer production shifts create opportunity: One bearing customer group is shifting automotive business from the US to Eastern Europe for cost reduction; Rolex expects to start supplying that new plant from the last quarter of the current fiscal.
- New bearing customers converting: A couple of US industrial non-automotive bearing ring manufacturers have already approved Rolex's rings within 7–8 months, with SOP scheduled for Q1 next fiscal.
- European customer restarting: Business from one European customer that had stopped for two quarters has already resumed, with schedules received from the January quarter.
- Trump tariff optimism, unquantified: Management expects Trump policies to benefit India through possible anti-dumping measures or restrictions on countries other than India, but provided no specific scenarios or quantification.
Madeka: "…we expect that, Trp might be introducing certain, anti-dping or some kind of, you know, certain restrictions for certain countries apart from India for as far as the US import is concerned, which will definitely give us, some benefit to India."
Auto Component Growth Engine
- Market share gains concentrated in the Americas: 70% of auto component market share gains are coming from Mexico and the US, with 30% from Europe; the company is also gaining from multinationals growing their India domestic operations.
- New French OEM win: A big French OEM awarded a significant auto component business, with supplies starting next year.
- New customer sourcing model emerging: Some customers have identified suppliers who can supply full finished components and directed those suppliers to source semi-finished product from Rolex; two such customers were recently added, one in the US and one in Chennai, India.
- Capacity expansion underway: Two more vertical forging lines have been ordered for auto component growth, to be installed "immediately within next year"; one high-speed hot former installed last fiscal has already won business.
- Customer expansion pipeline: One main auto component customer in off-highway, heavy vehicles, and earthmoving is expanding its domestic plant; Rolex expects a good share from that expansion within one year.
- New supplies from mid-2025: Supplies to new auto component customers are scheduled to begin in mid-2025.
Competitive Position & Switching Dynamics
- Bearing ring switching is faster than auto components: Switching a bearing ring supplier takes 6–8 months to SOP; auto components take more than 12–15 months due to higher criticality and more stringent application requirements.
- Customer stickiness is high: Customers will not change suppliers unless there is a major quality issue, a major delivery issue, or an abnormal price increase.
- Large Indian forgers are not competitors: Bharat Forge and Ramkrishna have only ~10% product overlap with Rolex's range; different forging technologies (hot, warm, cold) require different equipment, and "everybody is having their own strength in your product or range of product."
- No known new competitor in bearing rings: When asked about competitive intensity from another forging player entering bearing rings, management said "we don't know any new competitor" and argued their facility and SKU range makes it difficult for competitors to cater to the entire customer base.
- Domestic bearing ring forging share: Rolex holds ~30–33% of the domestic bearing ring forging market; the next player is "not more than 8 to 10%," per management.
- Build-to-print model: Rolex does not have an R&D department and "simply follow[s] their drawing," operating purely as a build-to-print supplier.
Doshi: "…they will never change the supplier until and unless there is any major quality issue or there is any major delivery issue, or we suddenly ask for any Abnormal price increase in these three scenarios only they will try to move out."
Balance Sheet & Capital Allocation
- Strong cash generation: H1 operating cash flow was ~₹124 crore, with minimal CapEx of ~₹20 crore; the company is net debt negative with a good cash surplus.
- Right of Recompense nearing resolution: The estimated ₹32 crore one-off expense from last year was provided in the books; bankers are working on final numbers, and there could be some additional impact charged by the end of this quarter. Once compliance is completed, restrictions will be removed and Rolex will be free regarding appropriation of earnings, with no plan to borrow funds.
- Cold forging not imminent: Cold forging is in management's mind but requires a completely new greenfield facility; the priority is to concentrate on the existing facility with spare capacity, and cold forging may be considered in 3–4 years, though it remains at a very primary stage.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Q3 performance | Fairly similar to Q2 | Q3 FY25 |
| Improvement begins | Things should start improving | From Q4 FY25 |
| Bearing ring growth from customer shifts | More business from customers shifting from Korea to India | Within 3–5 months |
| Bearing ring business recovery | Slight improvement | From Q1 FY26 |
| New auto component supplies begin | Supplies to new customers | Mid-2025 |
| FY26 revenue growth | At least mid-teen growth | FY26 |
| Right of Recompense finalisation | Possible additional charge; restrictions removed upon completion | By end of current quarter |
| US customer Eastern Europe supply | Start supplying shifted program to new Eastern Europe plant | From last quarter of current fiscal |
| New bearing ring customer SOP | SOP from newly approved US industrial customers | Q1 next fiscal |
Key Metrics
| Metric | Q2 FY25 |
|---|---|
| Revenue | ₹300 cr, down ~3–3.5% QoQ from ₹311 cr in Q1 FY25 |
| EBITDA margin (incl. other income) | 24.4%, up from 24.2% in Q1 FY25 |
| EBITDA margin (excl. other income) | 22%; ~23% if operational forex gain of ₹3.5–3.7 cr is included |
| PBT | ₹65 cr, vs ~₹66 cr in Q1 FY25 |
| PAT | ₹49.3 cr, vs ~₹50 cr in Q1 FY25 |
| H1 FY25 revenue | ₹611 cr, annualised broadly flat vs FY24 full-year ₹1,221 cr |
| H1 FY25 EBITDA | ₹152 cr, margin 24.3%; annualised ahead of FY24 full-year ₹277 cr |
| H1 FY25 PBT | ₹99 cr, annualised ahead of FY24 full-year ₹242 cr |
| FY26 revenue growth guidance | Mid-teen growth, based on customer schedules and dialogues |
| Auto component revenue share | 53% of total revenue, surpassing bearing rings for the first time |
| Bearing ring revenue share | 47% of total revenue, down from ~60% in FY24 |
| Export revenue share | 52% of total revenue; domestic 48% |
| Bearing ring de-growth | ~25–30% YoY in Q2 |
| New auto component business wins (H1) | ₹80–100 cr in six months |
| Operating cash flow (H1) | ~₹124 cr; CapEx ~₹20 cr |
| Return on equity | ~20% |
| Net debt | Net negative for almost a year; zero debt, good cash surplus |