Key Takeaways
- Bearing rings collapsed, dragging the quarter: Revenue fell to ₹259-260 crore from ₹300 crore in Q2, driven by a 45-50% volume drop from one major bearing ring customer group and 25-30% from others, as end-OEM production schedules were slashed.
- The damage is demand, not share loss: Management explicitly stated the bearing ring decline is not destocking or supplier switching; customers are idling lines for 15 days a month, something normally unthinkable in bearing manufacturing.
- A ₹175 crore order book provides the FY26 bridge: New nominations across auto components and bearing rings, spanning Europe, Americas and domestic markets, carry an annual value of ~₹175 crore with first-year ramp-up of 25-30%.
- Margins compressed on operating leverage, not price: EBITDA margin fell to ~21% from 24.4% QoQ as fixed costs absorbed less volume; management expects recovery to 22-23% as scale returns, with new orders won at comparable margins.
- What to watch next quarter: Whether the bearing ring customer merger integration unlocks the promised April/May demand restart, and whether Q4 revenue crosses ₹300 crore as management is attempting.
The Bearing Ring Shock
- Volume collapse, not wallet share loss: One major customer group reduced offtake by 45-50%, other customers by 25-30%. Management was emphatic that 99% of the decline is market-driven, not supplier switching; out of ten components, a customer may have discarded one product, but that is very few components.
- Root cause is end-demand, not destocking: Customers' own production schedules and dispatches to their principal OEMs have significantly reduced. Destocking is not the main issue.
- Production lines idled: Some bearing customers have been stopping their lines for 15 days every month because of low demand; normally they cannot stop a bearing line even for an hour due to the high cost.
- Customer CapEx deferred: Major bearing ring customers have slowed expansion, deferring CapEx by 6-12 months due to weak European demand.
- Merger disruption added friction: One of the world's biggest bearing players recently acquired a large group (50-60% of that group's turnover), causing delays as integration is underway. That customer visited Rolex's facility and indicated faster movement from April/May onward.
Mihir Madeka: "My customer has even stopped their line. Many lines for 15 days, one month continuously means every month they were swapping their line for 15 days. Then they run for 15 days. Again they will stop for 15 days. Otherwise they cannot stop the line even for an hour. It is a huge cost to stop the bearing line for one hour."
New Order Pipeline: The FY26 Bridge
- ₹175 crore in annual nominations won: New and existing customers across Europe, Latin America, North America, and domestic market have confirmed dispatch plans totaling ~₹175 crore in annual value for FY26.
- Ramp-up trajectory: First-year dispatch expected at 25-30% of the annual value, with some programs at 50-60%. FY27 should see 50-60% ramp-up, adding ₹50-75 crore of incremental volume.
- Auto component and EV wins: Company has won 3-4 programs in the EV segment, including one domestic auto OEM EV customer order where bulk supply starts next month.
- New bearing ring customers added: A couple of bearing ring customers for the European market have been onboarded, which may provide some recoupment.
- Order book confidence: Management does not expect deviation of more than 10% from the ₹175 crore annual business expected from FY26.
- Margins intact on new wins: Orders are coming at the same kind of margins; company is not compromising on margins due to high technology and high precision levels.
Hiren Doshi: "the first year, the project volume or the ramp up is to the extent of 25 to 30%, something like that... in FY 27 again, company would be having maybe 50 to 60% of the ramp up, to these new programs."
Revenue Mix Shift
- Auto component share rose to 55% of 9M revenue, but this is a denominator effect: bearing rings shrank, not that auto components grew.
- Domestic revenue increased to 52% (9M) from prior periods, mainly due to auto component business and the reduction in bearing ring exports.
- Industrial bearing ring overseas business was significantly affected, pulling down the industrial share to 17.3%.
- Renewable energy slowdown: Slowdown in windmill and solar revenue contributed to the margin decline through product mix change.
Margin Walk & Financial Position
- EBITDA margin fell to ~21% from 24.4% in Q2, driven by lower revenue, fixed cost absorption issues, product mix change, and additional depreciation.
- 9M margin improved despite the Q3 hit: 9M EBITDA margin rose to 23.3% from 22.4% in 9M FY24, showing the first-half strength.
- PAT reduced by extraordinary provision: The ₹18.6 crore provision for right of recompense and lower revenue pulled down PAT.
- Balance sheet strength: Operating cash flow remained sound at ~₹150-160 crore for 9M; company is net debt negative with cash surplus.
- CapEx light: No significant CapEx required for current volume (₹5-7 crore). If volume multiplies in 1.5-2 years, CapEx of ₹20-30 crore may be needed.
- ROE expected on the downside this fiscal due to PAT reduction and the extraordinary provision.
Right of Recompense: Closing a Legacy Overhang
- ₹18.6 crore provision booked in Q3 toward the liability for right of recompense to lenders from the 2013 debt restructuring. Total expected liability is ₹50-60 crore, of which ₹32 crore was provided last year.
- Settlement push by March 2025: Management is pushing to close the ROR liability by end of March 2025, expecting to settle with a one-shot payment and get much of the rebate/waiver on the ₹73 crore.
- Strategic unlock: Paying off the ROR would open many doors currently closed.
- Provision basis debated: The CDR-approved sacrifice was ₹50.6 crore; ₹10-11 crore was charged in excess by banks, and the calculation method is debatable. The final amount will be at lenders' discretion.
Hiren Doshi: "we would like to pay it off. The claim of ROR so that it will, or rather it will open many doors which are closed as of now."
Structural Tailwinds
- Global forging capacity shifting to India: Several big players have announced and started closing down their forging facilities; some have started closing entire plants and moving toward India and low-cost countries.
- US tariff exposure minimal: Hardly one component may have some duty hike impact; not significant in overall value or volume.
- Business expiration risk low: Management stated they don't have much business expiring; the earliest program expiry is around 2028. The current decline is volume reduction on existing programs, not program losses.
Manesh Madeka: "Looking to the current nomination, what we have got and simple submission is going on. We feel that our in future we may have good business with good profitability because most of the nomination, what we have got is from auto component and for export in Europe and USA."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Revenue growth | 15-20% revenue growth | FY26 (next fiscal) |
| Revenue growth | 15-18% growth based on nominations received | FY27 |
| New order ramp-up | ₹175 crore annual value, 25-30% first-year dispatch (~₹44-52 crore) | FY26 |
| New order ramp-up | Additional ₹50-75 crore as ramp-up reaches 50-60% | FY27 |
| Q4 revenue | Attempting to cross ₹300 crore and match FY24 annual number | Q4 FY25 |
| EBITDA margin recovery | Back to 22-23% once scale returns | As volumes recover |
| Right of recompense closure | One-shot payment settlement with rebate/waiver expected | By end of March 2025 |
| Bearing ring recovery | One major customer indicated faster movement post-merger integration | April/May 2025 |
| Bearing ring normalization | Getting back to normal level needs a couple of quarters | ~H1 FY26 |
| CapEx | ₹5-7 crore for current volume; ₹20-30 crore if volume multiplies | 1.5-2 years out |
Key Metrics
| Metric | Q3 FY25 |
|---|---|
| Revenue from operations | ₹259–260 cr, vs ₹300 cr in Q2 FY25 and ₹273 cr in Q3 FY24 |
| EBITDA margin | ~21%, vs 24.4% in Q2 FY25 and ~20.5% in Q3 FY24 |
| PBT | ₹45 cr, vs ₹65 cr in Q2 FY25 and ₹50 cr in Q3 FY24 |
| PAT impact – extraordinary provision | ₹18.6 cr provision for right of recompense liability to lenders |
| 9M FY25 revenue | ₹871 cr, vs ₹1,122 cr in 9M FY24, down 2.9% YoY |
| 9M FY25 EBITDA | ₹207 cr, margin 23.3% vs ₹277 cr and 22.4% in 9M FY24 |
| 9M FY25 PAT | ₹119 cr, vs ₹156 cr in 9M FY24; PBT ₹177 cr vs ₹242 cr |
| 9M FY25 operating cash inflow | ~₹150–160 cr, H1 FY25 was ~₹124 cr |
| Revenue mix – auto components vs bearing rings (9M) | 55% auto components, 45% bearing rings, ratio reversed from prior periods |
| Export share (9M) | 48% of revenue, domestic 52% |
| Revenue by application – passenger vehicle | 46% of revenue |
| Revenue by application – commercial vehicle | 29% of revenue |
| Revenue by application – industrial | 17.3% of revenue |
| Revenue by application – EV and hybrid | ~7.7% of revenue |
| New business nominations for FY26 | ~₹175 cr annual value, first-year ramp-up at 25–30% |
| Expected FY26 revenue growth | 15–20% |
| Expected FY27 revenue growth | 15–18% |
| Expected margin recovery with scale | 22–23% |
| Right of recompense total expected liability | ₹50–60 cr, ₹32 cr provided last year, ₹18.6 cr this quarter |
| Net debt position | Net debt negative / zero debt with cash surplus |
| Q4 FY25 revenue target | Management trying to cross ₹300 cr |