Key Takeaways
- MDF margins expanded sharply, driving the quarter: Overall MDF EBITDA reached 29.33%, up ~190 bps QoQ, as both plants improved profitability despite flat realizations and lower volumes.
- Value-added mix is the core margin lever: Value-added products rose to 28.28% of MDF volume, up 5 percentage points QoQ, with a stated target to reach 40% this fiscal year.
- A new laminates unit fills a portfolio gap: The ₹60 crores Greenfield plant in Gujarat will produce jumbo-size laminates, a product management says is the key reason its laminates margins trail peers.
- Export realizations softened but have stabilized: Gulf market MDF prices fell 20–25%, pulling export realizations down ~₹2,000 per CBM QoQ; management says the trend has now stabilized.
- What to watch next quarter: Whether the value-added mix continues its climb toward 40%, the pace of laminates margin recovery as raw material costs ease, and any concrete announcement on the next product CAPEX.
MDF Business: Margins, Mix & Utilization
- Plant-level profitability improved across the board: Chikmagalur EBITDA reached 34.38% (up from 32.22% QoQ) while the AP plant hit 25.74% (up from 24.55% QoQ), lifting overall MDF EBITDA to 29.33% from 27.44%.
- Margin improvement came from cost control, not price: Realizations were flat QoQ at ₹27,468 and volumes were lower, but stable-to-declining raw material costs, particularly timber and chemicals, allowed profitability to rise.
- Chikmagalur commands a margin premium over AP: The gap is explained entirely by Chikmagalur's established value-added product portfolio; AP's R&D for value-added products is still ongoing, not by any structural cost advantage at one plant.
- Value-added mix jumped 5 percentage points QoQ: Volume rose to 15,368 CBM, lifting the mix to 28.28% from 23.29%; Chikmagalur value-added realization increased ~6% QoQ to ₹38,363 per CBM.
- Utilization dipped on seasonal factors: Overall capacity utilization fell to 73.77% from 76% QoQ, with domestic MDF volumes down 7–8% YoY. Management attributed this to monsoon moisture in wood affecting production, a pattern also seen across peers whose utilization dropped from ~80–81% to ~74–75%.
- Import pressure is contained and manageable: Imports are mainly interior-grade basic products bought by converters, while the company focuses on branded exterior-grade, pre-laminated MDF and HDF that are not being imported. Management sees at most 2–3% further price pressure from imports, noting that shipping costs have already halved and exporting companies find current India pricing unviable.
Keyur M. Gajjar: "We are talking about branded products like exterior grade, pre-laminated MDF, HDF and all this product, which are not being imported at present. And our focus is to increase this business..."
Laminates: Portfolio Gap & Margin Recovery
- Laminates margins trail peers for a specific, fixable reason: The company lacks jumbo-size laminates in its portfolio, which excludes it from niche markets in America, Europe and Australia. Management identified this as the primary driver of the margin gap.
- A ₹60 crores Greenfield unit in Gujarat is the answer: The new facility will add 0.12 crore sheets per annum of larger-size laminates, funded through internal accruals and debt, with expected operationalization by Q1 FY25.
- Revenue potential is ₹100 crores-plus: Exact projections will follow as procurement and machinery activities progress. The export/domestic split is expected to mirror current ratios of roughly 60% export and 40% domestic, with new applications like cubicles and dressing rooms under exploration.
- Near-term margin improvement is already underway: Marginal improvement was seen versus last quarter, and management expects the raw material pricing ratio to drive further gains in the coming one or two quarters.
- Export realizations benefit from a premium product mix: Higher realizations in the Far East come from premium products, while the Gulf market buys expensive products with different thicknesses, both driven by product mix rather than geography alone.
Rushil Thakkar: "As we see in our current portfolio, we don't have this jumbo size because of which we are missing the niche markets like America, Europe Australia. So, the main plan is to establish such facility and improve our margins through value added products."
Export Markets: Pressure & Stabilization
- Gulf market prices corrected sharply: Export MDF realizations fell by approximately ₹2,000 per CBM versus the June quarter, driven by a 20–25% price downtrend in the Gulf market.
- The trend has now stabilized: Management stated that prices have steadied as of the current month, and exporting companies are not inclined to reduce FOB prices further because selling at current levels to India is already not very viable for them.
- Export demand saw some pressure during the quarter: Management expressed hope for improvement in coming quarters, though no quantified recovery timeline was provided.
- Laminates exports carry a realization premium: The Far East and Gulf markets absorb premium and thicker products respectively, supporting higher export realizations versus domestic.
Keyur M. Gajjar: "Companies exporting to India, they are facing pricing issue too, because for them selling at this price to India is also not much viable. So, we don't see much of a price pressure of import now onwards, maybe maximum I would say 2%, 3%, that's all..."
Costs, Balance Sheet & CAPEX
- Raw material costs are stable to declining: Timber prices showed no significant changes; chemical prices were stable or trending downward through September, August and October. Resin raw material costs have a good chance of a downtrend, though timing is uncertain.
- Interest costs rose with RBI rate hikes: The average loan cost increased from 5–5.5% to approximately 6%. The loan portfolio is diversified across a German financier loan at 1–2%, a foreign currency loan linked to LIBOR at 3–4%, and an Indian currency loan.
- MDF plant CAPEX is now complete: The Visakhapatnam plant CAPEX, including machines, civil work, utilities, prelam capacity increase, in-house resin facilities and efficiency-improving software, is finished.
- No early debt repayment planned yet: Management will wait one or two quarters; if performance continues at current levels, it will then decide on early repayment. For now, the bank's repayment schedule will be followed.
- New product CAPEX decisions are under consideration: The company is exploring additional product options beyond MDF and laminates, including particle board, but this financial year only the laminates expansion is planned. An announcement is expected soon.
Demand & Industry Dynamics
- Management is very optimistic on demand: The company is doing comfortably well and sees no issues in the near future, though Q3 is seasonally a little slow compared to other quarters due to the festive period.
- New industry capacity will take time to absorb: Management expects new capacity to be absorbed by the market in a year or two as market growth catches up. When capacity is added, companies will either focus on exports or protect market share.
- The import threat is limited to basic categories: Imported MDF is mainly interior grade bought by converters, while the company's focus on branded exterior-grade and value-added products provides insulation.
Keyur M. Gajjar: "New capacity will not be absorbed overnight, but it will be absorbed by the market in a year or two because we see certain growth in market by that time."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Value-added MDF mix | Increase from current 28% to 40% | This financial year |
| MDF capacity utilization | Reach 80–85% at AP plant; maintain Chikmagalur at best levels | This financial year |
| EBITDA margin maintenance | Maintain EBITDA margin in percentage terms; slight increase targeted despite pressures | Throughout this financial year |
| New laminates unit operationalization | ₹60 crores Greenfield unit in Gujarat for jumbo-size laminates | Q1 FY25 (by June 2024) |
| Laminates margin improvement | Improvement driven by raw material pricing ratio and export demand | Coming one to two quarters |
| Future product CAPEX announcement | Decision on additional product CAPEX under consideration | "Very soon" |
Key Metrics
| Metric | Q2 FY23 |
|---|---|
| Operating revenue | ₹203.4 cr, growth of ~18% YoY vs ₹171.3 cr |
| EBITDA | ₹47.1 cr, growth of 115.2% YoY vs ₹21.9 cr |
| EBITDA margin | 23.17%, up 1,039 bps YoY from 12.78% |
| Net profit | ₹26.7 cr, growth of 247.2% YoY vs ₹7.7 cr |
| PAT margin | 13.12% |
| MDF business revenue | ₹149 cr, growth of 23% YoY vs ₹121 cr |
| Laminates business revenue | ₹52.8 cr, vs ₹50.8 cr in Q2 FY22 |
| H1 FY23 operating revenue | ₹414.2 cr, growth of 57.9% YoY |
| H1 FY23 EBITDA | ₹94.6 cr, growth of 304.3% YoY vs ₹23.4 cr |
| H1 FY23 net profit | ₹53.9 cr, margin of 13% |
| MDF overall capacity utilization | 73.77%; AP plant 68.71%, Chikmagalur plant 87%-plus |
| MDF overall realization | ₹27,468, flat QoQ |
| Value-added product mix | 28.28% of total volume, up from 23.29% QoQ; target 40% in FY23 |
| MDF overall EBITDA margin | 29.33%, up from 27.44% QoQ |
| MDF sales volume | 54,344 CBM, down 7% to 8% YoY |
| New laminates Greenfield CAPEX | ₹60 cr, capacity 0.12 cr sheets per annum, expected operational Q1 FY25 |
| Average cost of total loan portfolio | ~6%, up from 5% to 5.5% last quarter |
| Foreign currency fluctuation cost | ₹93.86 lakhs, booked in other expenses |