Key Takeaways
- Muted FY25, but margin story intact: Revenue growth will be subdued as the Jumbo laminate plant is delayed to Q4, yet management still guides 10–15% consolidated revenue growth and ~12% EBITDA margin for the year.
- MDF is the engine, value-added mix is the fuel: Export MDF volume jumped 27.6% YoY, and value-added products hit 54% of revenue, lifting realizations without a broad price hike. The target is 60% value-added by FY26 with no extra capex.
- A price hike cycle has begun: A 2–7% hike was implemented last Saturday, and a second round is being considered as early as possible, with management noting all players have moved because raw material costs make it inevitable.
- Laminate margins have structurally reset: Segment EBITDA margins have climbed from a historical 6–9% to 12–13% over the last 3–4 quarters, and the upcoming Jumbo plant (14–16% margin) promises a further lift next year.
- What to watch next quarter: Whether the second price hike lands, the pace of value-added MDF mix improvement toward the 50% AP plant target, and any update on the Singapore subsidiary evaluation.
MDF: Volume, Mix & the Margin Roadmap
- Export volume drove the quarter: MDF export volume grew 27.6% YoY, and total MDF volume reached 72,013 cubic meters. Realization per CBM rose QoQ because 54% of revenue came from value-added products, not because of a list-price increase.
- Domestic price was stable, export price edged up: Domestic MDF price was consistent with the prior quarter, while export realization increased by ₹1,000 per CBM.
- Import tailwind is helping the South plant ramp: MDF imports have fallen compared to two quarters ago because of freight costs, which is aiding utilization at the southern facility. Imports are only ~10% of industry capacity and are plain vanilla, leaving the quality-product market to domestic players.
- Margin recovery has multiple levers: The 20%-plus MDF margins of two years ago were a one-off, but management believes current margins will improve. Drivers include: the export obligation is now complete, freeing the company to take better-margin orders; capacity utilization is above 85%, and incremental utilization drops straight to the bottom line; the value-added proportion is rising every quarter; a price hike has already started; and BIS standard implementation is expected by February next year.
- Value-added target is 60% by FY26: Currently at 45% of MDF volume, the company aims to reach 60% with no additional capex. At the AP plant specifically, value-added volume moved from 35% to 37% QoQ, with a near-term goal of 50% of that plant's capacity.
Keyur Gajjar: "If you see in our AP plant, last quarter, our value-added volume was around 35%, this quarter we are almost 37% and we also wish to reach to 50% of this capacity."
Laminates: Jumbo Delay & a Margin Reset
- Volume dipped slightly, but mix lifted domestic realization: Total laminate volume was 7,51,670 sheets, down 2.9% YoY, while exports held steady. Domestic realization jumped 20.8% YoY due to product mix, though export realization declined 2.6%.
- Segment margins have structurally improved: Laminate EBITDA margin reached 12.9% in Q2 and 11% in H1, up from a historical range of 6–9% over the last 3–4 quarters. Export margins are better than domestic, though management declined to quantify the gap because it depends on exact product composition.
- Jumbo plant delayed to Q4, but the margin promise is intact: The Gandhinagar Jumbo laminate project was postponed from Q2 to Q4 due to machinery supply issues and unexpected rainfall. Once operational, the Jumbo product carries a margin range of 14–16%, and management expects a sizable turnover contribution next financial year, lifting overall laminate margins.
- New export territories are opening: The company signed a contract in Italy, signed contracts with customers in Russia, and is opening territories like El Salvador and Puerto Rico, describing these as fresh markets with significant potential.
Hiren Padhya: "Now, after having this new project into place, the overall margin will definitely improve because the Jumbo product has a margin in the range of 14% to 16%, and the way we are planning next financial year will definitely have a sizable turnover in terms of this particular product."
Pricing Power & Raw Material Dynamics
- An industry-wide price hike is underway: A price increase of 2–7%, depending on the product, was implemented last Saturday. All players, larger and smaller, have taken price increases because raw material pricing makes it inevitable, across both North and South markets. The average price benefit is ~3%.
- A second hike is being pursued aggressively: The first hike was likely implemented in November, and management wants to take the second hike as early as possible.
- Timber prices are in a cyclical upswing: Timber prices remained constant last quarter due to available stock but have slightly increased in the current quarter. Management expects prices to stay in the current range, with a 2–3% hike, for the next two years because this is a regrowing year. On the third year, when ample timber becomes available, prices should start falling, though management declined to forecast the market scenario that far out given new plants starting in the next three years.
- Laminate raw material costs are stable: No raw material price hike has been seen in the laminate business, and costs are expected to remain stable.
- Competitive discipline should hold: Even with a Green Panel plant coming in the South, players are likely to maintain discipline because import costs are high and all domestic players face raw material price increases.
Keyur Gajjar: "At Rushil, we really want to implement it faster. So, first hike probably will implement in November, and we'll take the second hike as early as possible."
Strategic Moves: Plywood, Singapore & Maintenance
- Plywood is a distribution play, not a diversification: The company is setting up a plywood plant as a marketing strategy to secure exclusivity from distributors and channel partners who previously would not grant it without a plywood offering. The plywood industry in India is still larger than MDF, and few branded players serve good plywood, so Rushil wants to be one of them. The plant is funded internally.
- Singapore subsidiary under evaluation: A wholly owned subsidiary in Singapore is being considered to better serve the Southeast Asian market.
- Chikmagalur shutdown is routine and beneficial: A planned 10–12 day maintenance shutdown starting from Deepavali is a routine procedure every 3–4 years to replace parts affected by metallurgy in the machinery, preventing fiber losses. Inventories are being built ahead, so no significant revenue loss is expected, and the shutdown will sustain capacity utilization above 100% for the next couple of years.
Rushil Thakkar: "This is a kind of marketing strategy for us because we were not able to get the exclusivity from our distributors for not having a plywood. So, this is just a marketing strategy that we set up the plywood plant so that we can have exclusivity from our distributors and channel partners."
Financials: EBITDA, Debt & the FOREX Drag
- Reported EBITDA masked by currency losses: Reported EBITDA was ₹29.6 crore, a 12.9% margin. Excluding FOREX losses, EBITDA would have been ₹32.4 crore, or roughly a 14% margin. Currency hedging strategies have been implemented from this quarter to mitigate FOREX exposure.
- Segment profitability is converging upward: MDF EBITDA margin was 13.2% in Q2 and 12.8% in H1, driven by export volume growth and value-added mix. Laminate EBITDA margin was 12.9% in Q2 and 11% in H1, continuing its climb from historical lows.
- Receivables spike is a one-off: Receivables increased YoY, driven by domestic customers. Exports generally operate on LC or advance terms, so outstanding amounts are minimal. The domestic increase is considered a one-off and is expected to normalize next quarter.
- Debt reduction is on a steady path: Debt will reduce by around ₹50–55 crore every quarter or year. No additional debt is required for the Jumbo project, as fundraising is already tied up, or for plywood, which is funded internally.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Consolidated revenue growth | 10–15% growth | FY25 |
| Consolidated EBITDA margin | Targeting ~12% | FY25 |
| Jumbo laminate plant commissioning | Operations begin; margin range 14–16% | End of Q4 FY25 |
| Value-added MDF mix | Reach 60% of MDF volume (from 45% currently) | By FY26 |
| AP plant value-added mix | Reach 50% of AP plant capacity (from 37% currently) | No date; stated as a wish |
| Debt reduction | Reduce by ₹50–55 crore per quarter/year | Ongoing |
| Second price hike | Implement second round of price increases | "As early as possible" after November first hike |
| Chikmagalur maintenance shutdown | 10–12 day shutdown; no significant revenue loss expected | Starting from Deepavali first day |
Key Metrics
| Metric | Q2 FY25 |
|---|---|
| Revenue from operations | ₹230.4 cr, +12.6% YoY and +2.4% QoQ |
| EBITDA | ₹29.6 cr, +2.4% YoY; margin 12.9% |
| EBITDA (excl. FOREX losses) | ₹32.4 cr, margin ~14% |
| Profit before tax | ₹15.4 cr, +11.9% YoY |
| Profit before tax (excl. FOREX losses) | ₹18.3 cr, PBT margin 7.9% |
| Profit after tax | ₹11.4 cr, +7.9% YoY; PAT margin 4.9% |
| MDF segment revenue | ₹171.7 cr, +14.8% YoY |
| MDF segment EBITDA margin | 13.2% |
| Laminate segment revenue | ₹50.3 cr |
| Laminate segment EBITDA margin | 12.9% |
| MDF total volume | 72,013 CBM |
| MDF exports volume growth | +27.6% YoY |
| Value-added MDF share of division revenue | 54% |
| Laminate total volume | 7,51,670 sheets, -2.9% YoY |
| Laminate domestic realization growth | +20.8% YoY |
| Laminate export realization change | -2.6% |
| Net debt-to-equity ratio | 0.44 |
| MDF price hike implemented (current quarter) | 2% to 7% depending on product; blended average benefit ~3% |
| FY25 consolidated revenue growth guidance | 10% to 15% |
| FY25 EBITDA margin guidance | ~12% |