Key Takeaways
- Margin expansion leads the quarter: EBITDA grew 32.5% with a 452 bps margin jump to 25.26%, driven by product mix shift toward higher-realization components and assemblies.
- Shunt resistors now nearly half the business: The shunt segment reached ~49% of standalone revenue, with India growing 19% YoY and Rest of Asia up 63%, more than offsetting softer Western exports.
- Forward integration unlocks a ₹150 crore opportunity: Turning strip into parts and assemblies, including PCB-mounted shunts, could add ₹150 crores in FY27, with commercial production ramping from Q3/Q4 this year.
- US tariffs are a double-edged sword: A 50% tariff now applies to all products after an exemption was withdrawn; existing business is protected by high switching costs, but new developments for FY27-28 face damage, while shunt conversions have paradoxically accelerated.
- What to watch next quarter: Whether domestic bimetal rebounds as guided, the pace of PCBA prototype testing and customer validation, and any tariff-driven slowdown in US order flow.
Margin & Mix Shift
- Product mix upgrade drove gross margin: Gross margin improved approximately 215 bps as the business shifted from lower-value strips to higher-realization components and assemblies.
- Forward integration margins are lower but defensible: These assemblies carry ~35% gross margin versus ~50% for strips, but top-line value is 10–12 times higher, and the company only pursues opportunities with metallurgical complexity and entry barriers, rejecting commodity-type assemblies.
- Blended margin strategy has a soft floor: Management aims to maintain margins upwards of 20% but is willing to go to 16–17% EBITDA for strategically important opportunities; it will not go below the lowest-margin product currently in the portfolio.
- Working capital tightened meaningfully: Inventory days fell by 20 to 177, and net working-capital days dropped by 29 to 212, reflecting operational discipline alongside the margin gains.
Sumer Ghumman: "We don't want to fall into that temptation, because we genuinely believe that those margins are not sustainable, and eventually they come down to commodity type margins. We as a company are not okay with going down that route."
Shunt Resistors & Smart Meters
- Shunt growth is outpacing the smart meter market: The company is experiencing disproportionate growth because relay manufacturing is shifting to India; as more large-volume players move relay production here, that gap should persist.
- Smart meter revenue trajectory: Expected to reach ₹70–75 crores this year and hit the ₹100 crore level a couple of quarters into next financial year, with overall potential upwards of ₹140–150 crores if government policy holds.
- Domestic market share could double: Shivalik already holds 40–50% of the domestic smart meter shunt market; management sees a path to doubling that as localized relay capacity builds and the situation becomes more favorable.
- Shunt realization grew despite volume decline: Realization rose 13% even as volume dipped 3%, because the higher-value component business is growing faster than the strip business, aided by a 4.5% LME movement and 3.5% dollar movement.
- Capacity expansion on the horizon: Shunt capacity utilization will cross a threshold by mid-FY27 where faster multiplication in the resistor space becomes necessary, potentially requiring additional capacity.
Sumer Ghumman: "What we are experiencing in smart meter growth is disproportionate. We're experiencing a much faster growth than what the market is. Market is also growing fast. But what we're experiencing is something faster, because what we are supplying to is this change of the relay being manufactured here."
Forward Integration & New Products
- PCBA prototype nears customer testing: The third series of prototypes for PCB-mounted shunt assemblies is closing soon; these will then be tested at the application level with various customers, with commercial production expected after a testing phase of less than 14–15 months.
- Forward integration revenue is back-end loaded: Of the ₹150 crore potential in FY27, only 10–15% is expected in the current year, mostly in the last quarter, as commercial production starts from Q3 and Q4.
- Bus bars and battery connectors are a new vertical: This uses existing electron beam welding technology to combine different sizes and shapes of busbars into one unit connected to a cell pack for two-wheeler and three-wheeler applications; finished parts are under customer testing, with a small production lot expected by September.
- Bus bar revenue ambition is material: Over the next three years, management has an initial target of ₹200–300 crores, with possibly 50–60% of that revenue achievable by FY28.
- Silver contacts represent a parallel pull-through: Wherever Shivalik supplies shunts, it is already either supplying silver contacts or developing them; the opportunity is described as very big.
- Four to five more verticals planned: The company wants to add another four or five product verticals with entry barriers similar to shunt resistors, with some already finalized and expected to be set up in another year to year and a half.
Kabir Ghumman: "By putting a PCB onto the shunt, along with a few other components that provide other data, you are creating one stop solution where you're getting accurate current sensing, along with other sensors that are mounted onto the shunt. So, it's cutting a couple of steps in the supply chain and putting that all into one ready to use solution which reduces the overall error in the system."
US Tariffs & Export Dynamics
- Tariff exemption withdrawn, 50% now applies: All products now fall under a 50% tariff after the earlier exemption notification was removed, creating a new cost dynamic for US-bound shipments.
- Existing bimetal business is sticky: Bimetal exports to the US are sustainable and not a pre-tariff pull-forward; these developments started two years ago, and the qualification and development process takes about two years, creating significant switching costs.
- New developments face tariff headwinds: If tariffs stay, they can have a damaging effect on new developments for FY27-28, even though existing business faces minimal impact.
- Shunt conversions accelerated by tariffs: Tariffs have multiplied the speed of shunt development conversions, compressing an 18–24 month process; customers now want to supply finished components directly to Asian customers, bypassing the US.
- US exposure has been deliberately diversified: Revenue previously going to the US is being redirected to direct OEMs or distribution centers of existing customers due to forward integration, and US exposure has reduced drastically in percentage terms as shunt development expands in Japan, Korea, and other regions.
- Mitigation strategy if US business is lost: Management will negotiate with large international customers like Schneider and Eaton to get business from other geographic regions in exchange, preserving scale benefits.
Sumer Ghumman: "I would say, in the shunt side, these tariffs have been a sort of a blessing in disguise for us, because all these developments, which had a, you know, 18-to-24-month conversion process, have now been multiplied."
Domestic Bimetal & End-Market Conditions
- Domestic bimetal is lagging larger customers: The domestic bimetal business has not reflected the growth of larger switchgear customers like ABB, Siemens, and Havells because the specific vertical within which Shivalik's materials go is still subdued.
- Customer end-markets have moderated: Product lines at customers like Schneider and Siemens where bimetals go in have moderated for the last two to three quarters, explaining the revenue-volume disconnect where volume grew last year but revenue did not due to metal price effects.
- A rebound is expected: Management anticipates double-digit growth for the domestic bimetal market, with a rebound driven by the same underlying customer demand that has been temporarily soft.
- Bimetal international business is gaining traction: The product is drawing preference over competitors and has grown in most geographies, with export realizations increasing because export valuation is higher compared to the domestic market.
Capacity, R&D & Organizational Build-Out
- Centre of Excellence being set up: A dedicated R&D facility and Development Center is being prepared, likely in the NCR region, with team hiring in final stages, aimed at accelerating product innovation in high-value, technology-intensive components.
- Electrical contacts facility transitioning: Factory construction is completed; operations are now gradually shifting from the existing unit to the new unit.
- FY28-29 capacity outlook: Shunt manufacturing capacities should be entirely used up by then, while bimetal may be at around 60% assuming partial normalization in the US.
- New product verticals timed for FY28-29: Some new product verticals already finalized should have revenue flowing by FY28-29, set up over the next year to year and a half.
- Localization opportunity in auto BMS: Indian auto manufacturers like Tata, Mahindra, and Maruti have been importing entire battery management systems from China; an opportunity opens up as they develop these devices in India, and hybrid adoption is expected to come in a big way involving these assemblies.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Overall revenue growth | Double-digit growth, aligned to estimations; 12–15% overall target | FY26 |
| Domestic bimetal rebound | Double-digit growth anticipated | FY26 |
| Smart meter revenue | ₹70–75 crore range | FY26 |
| Smart meter revenue | Reach ₹100 crore level | A couple of quarters into FY27 |
| Forward integration revenue | ₹150 crores from PCB assemblies, sub-assemblies, and strip-to-parts conversion | FY27 |
| Forward integration revenue (current year) | 10–15% of the ₹150 crore potential, mostly in the last quarter | FY26 (Q3/Q4) |
| PCBA commercial production | After prototype testing of less than 14–15 months | FY26-27 |
| Bus bars and battery connectors revenue | Initial target of ₹200–300 crores, with 50–60% achievable | By FY28 |
| Shunt capacity expansion trigger | Will cross a point requiring faster capacity multiplication | Mid-FY27 |
| Bimetal & shunt volume growth | 7–8% minimum to achieve double-digit value growth | FY26 |
| EBITDA margin floor | Will not go below current lowest-margin product; target in 20% range, lower side at 16–17% | Ongoing |
| New product verticals | Four to five additional verticals with entry barriers, similar to shunt resistors | Set up in 1–1.5 years; revenue by FY28-29 |
Key Metrics
| Metric | Q1 FY26 |
|---|---|
| Standalone revenue | Shunt Resistors contributed ~49% of standalone revenue |
| EBITDA growth | 32.5% YoY |
| EBITDA margin | 25.26%, expanded 452 bps YoY |
| Gross margin | Expanded ~215 bps due to product mix shift toward components |
| ROCE | 24.65% for FY25 |
| Net cash | ₹77 crore |
| Inventory days | 177 days, down 20 days |
| Net working-capital days | 212 days, down 29 days |
| India Shunt revenue | ₹20.29 crore, +19.12% YoY |
| Rest of Asia Shunt revenue | +62.81% YoY, from a lower base |
| Domestic Shunt split | ~70–75% metering, ~20–25% automotive |
| Smart meter revenue (FY26 outlook) | ₹70–75 crore expected, nearly doubling from ~₹40 crore last year |
| Smart meter total addressable opportunity | ₹140–150 crore for Shivalik, ₹350–400 crore annual TAM |
| Overall revenue growth guidance (FY26) | 12–15% |
| Volume growth outlook (FY26) | 7–8% minimum, to achieve double-digit value growth |
| Export volume | 251 metric tons in Q1; full FY25 was 1,000 metric tons |
| US tariff on India exports | 50% total (25% reciprocal + 25% Russian oil purchase levy) |
| Forward integration revenue potential (FY27) | ₹150 crore added revenue target; 10–15% of that may come in FY26 |
| Bus bars and battery connectors addressable market | ₹2,000–2,500 crore immediate opportunity; initial target ₹200–300 crore over 3 years |
| Domestic smart meter market share | 40–50% |
| Bimetal market share from vacated competitor business | 18–20%; capturing ₹20–25 per ₹100 vacated |
| Hyundai India penetration | 100% of Hyundai cars made in India use Shivalik product |