Key Takeaways
- Resilience in a reset: H1 FY25 revenue declined only 3.86% despite a global inventory reset and US demand recalibration, while Q2 grew 2.18% sequentially, signalling early recovery in automotive and industrial electronics.
- Deliberate margin trade-off: Gross margin contracted 272 bps as the company pivoted product mix toward high-demand, slightly lower-margin products to secure long-term revenue streams; management targets a return to 50% gross margin as the shunt-to-bimetal mix improves.
- India shunt is the growth engine: The domestic shunt segment surged 45.27% in H1, powered by smart meter localization; management sees a path to three-to-four times current levels if even half of latching relay production moves to India.
- Metalor JV scrapped, Europe subsidiary opened: The joint venture was abandoned because the required investment outweighed the potential bottom line; a new Italian subsidiary now enables direct European market access.
- What to watch next quarter: Whether the promised 10% Q4 bimetal volume growth materializes, the pace of US shunt recovery from new customer wins, and any further gross margin improvement as raw material costs stabilize.
Demand Environment & Regional Mix
- US market still under decline: The US remains soft, but growth in other markets offsets the drag so the overall decline is less severe than the US figure alone would suggest.
- India is the highest-confidence market: Large switchgear customers are giving encouraging forecasts for the next calendar year, asking Shivalik to prepare for 20–25% higher supply; this is driven by infrastructure growth and strong real estate development in tier 2 and tier 3 cities.
- European demand declined: Actual demand reduction in European markets and some Asian markets contributed to the bimetal business decline, though the new Italian subsidiary is designed to capture untapped resistor opportunities there.
- Bimetal volume down but stabilizing: Bimetal volume declined 8% YoY in Q2 FY25, but management notes the quarter-to-quarter drop is "hardly half a percent" on a scrap-adjusted basis and expects an increase from next quarter onwards.
- Recovery is steady, not explosive: Q3 and Q4 FY25 are expected to see "steady growth, not any exponential or substantial," with FY26 following a similar trajectory.
Sumer Ghumman: "some of that increase came from too much of over ordering from some of our customers. Because of supply chain issues, which, which, of course, was, was strong growth, but also has, it's proven that was not the most sustainable way of growth. So now what we are seeing, the kind of developments that have taken place, and the slight increase that we expect now and in the coming quarters, and then, other than that, these new developments will be a lot more sustainable growth"
Shunt Resistors & Smart Meter Opportunity
- India shunt grew 45.27% in H1 FY25: The segment reflects alignment with India's industrial expansion and technological modernization, with smart meters as one of the fastest-growing areas.
- Smart meter localization is the catalyst: Latching relay production has begun shifting from China to India at a very fast rate; all key players are either indianizing manufacturing or have definite plans to do so.
- Shivalik is the sole supplier for relay shunts: If a relay is produced in India, all of the shunt inside it will be supplied by Shivalik, giving the company a uniquely defensible position in this localization wave.
- Contacts face more competition: For contacts used in relays, there are other suppliers, so Shivalik plans targets accordingly; it currently supplies contacts to almost 50% of the relay business where it already supplies the shunt.
- Growth could triple or quadruple: If even 50% of latching relay production translates to local manufacturing, growth could reach three to four times current levels; the best-case scenario could see a doubling of last year's business.
Sumer Ghumman: "if even 50% of it translates to locally produced latching relays, with the growth that can be three to four times of what we are seeing right now also."
Margins & Product Mix
- Gross margin declined 272 bps: The reduction was driven by a strategic pivot toward high-demand products that carry slightly lower margins but align with evolving market needs; this is a deliberate mix adjustment to maintain market relevance.
- Sequential gross margin improvement in Q2: Two factors helped: raw material costs stabilized after a period of gradual LME declines, and growth in the domestic shunt segment gave a marginal improvement in gross margin.
- 50% gross margin is the target: Management believes that if the product mix reaches a 50-50 split between bimetal and shunt, gross margin should improve from the current 47–48% to 50%.
- Contact business margin under pressure: Gross margin in the contact business declined 89 bps YoY to 20.79% in H1 FY25.
- PBT margin contracted 178 bps to 21.79%: Rising input costs were the primary driver, partially offset by disciplined expense management.
- Working capital stretched: Net working days increased by approximately 36 days because over 75% of bimetal raw material is imported, requiring 180–200 days of inventory; management is working on developing domestic suppliers to reduce this.
Scrap & Operational Efficiency
- Volume reporting methodology changed: Scrap quantity has been excluded from reported volumes to provide comparable quarter-to-quarter and half-yearly figures; previously, scrap-inclusive numbers distorted comparisons.
- Bimetal scrap rate is mature: The established bimetal process runs at a throughput of around 10–11%, and management sees no further room for reduction.
- Shunt scrap still evolving: The target is to keep shunt resistor scrap below 20% on average, but the process is still being refined.
- Design scrap is unavoidable: Certain part layouts have no choice but to lose 15–20% or even up to 30% as design scrap, meaning a portion of material loss is structurally locked in by customer specifications.
- Automation and MOQs are the levers: Projects are in place to reduce controllable scrap through automation and inline sensing, targeting a reduction of 3–4 percentage points in some cases; working with customers to respect minimum order quantities enables higher-volume runs with lower material loss.
Kabir Ghumman: "there are certain part layouts where you have no choice but to lose 15% or 20% or even up to 30% as design scrap."
Strategic Developments
- European subsidiary established in Italy: The move enables direct market engagement, bypassing intermediaries and reducing operational redundancies; it was prompted by the retirement of the Milan-based agent who previously served European customers.
- Subsidiary opens resistor opportunities: The Italian entity can help identify opportunities in the resistor business, which was largely untapped in Europe outside a few large customers.
- Metalor JV abandoned: The joint venture as originally structured is not proceeding because the required investment was much higher than the bottom line it could add; management is looking at an alternate arrangement or may not pursue it at all.
- New US customer wins progressing: Several projects with US customers beyond Vishay Dale have materialized: some products passed design validation, some entered product validation, and some are in final sign-off on sales and purchase agreements; formal supplies should start "very soon."
- R&D pipeline building: Multiple developments are ongoing for downstream value addition, with initial trials and prototyping completed for two to three different project lines; some design and process changes are occurring due to evolving end-customer specifications.
- Promoter restructuring completed: One promoter family exited due to age-related reasons and the next generation not being involved; the remaining promoters increased their holding from 25% to 34%, and management does not foresee any further reduction.
Sumer Ghumman: "the investments required were much higher than the kind of business or kind of, you know, the bottom line that it could eventually add so financially, it was not making as much sense, at least in the structure that was originally envisioned"
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Bimetal volume growth | At least 10% growth in Q4 FY25 vs Q2 FY25, based on customer commitments and market interactions | Q4 FY25 |
| US shunt recovery | Growth from Q4 onwards based on received forecasts of increased quantity; new customer supplies to start "very soon" | Q4 FY25 onwards |
| Gross margin improvement | From current 47–48% to 50% as product mix reaches 50-50 shunt-to-bimetal split and raw material costs stabilize | Conditional on mix shift |
| Smart meter growth duration | Current elevated growth rates expected to continue for at least the next two to three years | 2–3 years |
| Shunt growth trajectory | Over 2–3 years, growth could reach closer to 20% levels, driven by market recovery and new customer developments from the last 1–2 years | 2–3 years |
| R&D spend increase | Plans to aggressively add testing equipment, prototype processes, and manpower; working toward increasing over "at least a year, year and a half" | Calendar 2025–2026 |
| Promoter holding | No further reduction in promoter holding foreseen; remaining promoters would like to find ways to increase it further if possible | Long-term |
| Indian bimetal demand | Large customers asking Shivalik to prepare for 20–25% higher supply next calendar year, driven by infrastructure and real estate growth | Next calendar year (forecast) |
Key Metrics
| Metric | Q2 FY25 |
|---|---|
| Total Income (H1FY25) | ₹216.77 cr, down 3.86% YoY |
| Gross Margin (H1FY25) | 46.57%, down 272 bps YoY |
| PBT (H1FY25) | ₹47.24 cr, down 11.09% YoY; margin contracted 178 bps to 21.79% |
| PAT (H1FY25) | ₹35.28 cr, PAT margin of 16.27% |
| Q2FY25 sequential revenue growth | 2.18% over Q1FY25 |
| Shunt segment India growth (H1FY25) | 45.27% YoY |
| Bimetal volume | 258,000 units, down 8% YoY |
| Bimetal volume guidance (Q4FY25) | ~10% improvement over Q2FY25 volume |
| Smart meter business expected FY25 | ₹70-75 cr, up from ₹37-38 cr in FY24 |
| Energy meter share of total sales (H1FY25) | ~13.5%, up from 8.5% in H1FY24; domestic portion grew to 9% from 4.5% |
| Contact business revenue (H1FY25) | ₹35.87 cr, up 21.60% YoY; Q2FY25 revenue ₹17.10 cr |
| Contact business gross margin (H1FY25) | 20.79%, down 89 bps YoY |
| Shunt business mix (Q2FY25) | Automotive ~61%, energy meter ~30%, other applications ~9% |
| R&D spend | ~1% of sales |
| Bimetal throughput (scrap rate) target | 8% to 11% |
| Shunt resistor throughput (scrap rate) target | Below 20% average |