Key Takeaways
- Soft quarter, ABS catalyst imminent: Revenue fell 12% YoY as lower styrene prices and subdued domestic demand weighed on performance, but Phase 1 ABS commercial operations are set to begin this quarter.
- Volume growth stalled by weather: Manufactured product volumes rose just 0.5% YoY after unseasonal rains and a milder summer cut demand for cooling appliances, the key end-market.
- ABS ramp-up is the FY27 story: Management expects to reach 50–60% utilization in the first six months, then accelerate toward 80%+ in FY27, with a ₹2,000 crore top-line at full capacity.
- Margins squeezed by multiple forces: A styrene price drop created inventory losses while weaker OEM offtake added pressure, a combination management declined to quantify.
- What to watch next quarter: ABS commissioning and initial customer acceptance, the pace of styrene price stabilization, and any demand recovery as the summer season progresses.
ABS Project: The Next Growth Engine
- Phase 1 commissioning: Pre-commissioning activities are ongoing with technical collaborators Versalis, and commercial operations are expected to commence in the current quarter, by August end.
- Ramp-up trajectory: The first few months will go into testing, trials, and acceptance by processors and molders; management expects to operate at 50–60% utilization for the six-month period, then start ramping up toward 80%+ in FY27.
- Revenue potential: At 100% capacity utilization, ABS will contribute a ₹2,000 crore top-line, with management confident of earning some contribution even in the initial six months despite lower capacity and new product acceptability issues.
- Phase 2 timeline: Phase 2 ABS is planned to start in FY28, though management will make efforts to begin earlier.
- Value-added mix shift: With ABS and ABS compounds entering the portfolio, the proportion of value-added grades is expected to cross 40% going forward, up from the current 35–40% range, though the exact quarter is uncertain.
- Technology cost treatment: The one-time technology fee to Versalis is treated as a capital cost and depreciated over years, with no P&L impact; management declined to disclose the amount.
Rakesh Nayyar: "This will be our first year and maybe six months of operations. First few months will certainly go in the testing, trial, acceptance of the product by the processors and the molders. So, we expect that of the six months period maybe we will be operating at 50% to 60% and then we will start ramping up."
Demand Environment & Volume Performance
- Weather-driven demand weakness: Unseasonal rains and a milder summer led to subdued domestic demand for cooling appliances such as air conditioners and refrigerators, directly hitting polystyrene offtake from OEMs.
- Styrene price trajectory: Styrene prices were stable till mid-March, then dropped over roughly six weeks, impacting Q1 performance; prices have been stable since April end, offering a more predictable input cost environment ahead.
- Utilization below potential: Polystyrene plants are currently operating at 81–82% utilization, not the 90% some analysts had assumed, reflecting the demand softness.
- Value-added grade mix dipped: The proportion of value-added grades fell to around 36% this quarter due to seasonal factors and slightly lower offtake of these grades by OEMs, within the historical 35–40% band.
- Trading turnover normalizes lower: Trading turnover was closer to 20% this quarter, down from the typical 22–23% range.
Exports & Trade Flow Dynamics
- Export ambition: Management hopes to raise exports to 13–14% of revenue in FY26, up from current levels, after a period of slower export activity; the company has been exporting for 28–29 years to SAARC, Gulf, Africa, and Europe.
- European opportunity, tempered by demand: Management agrees there is an opportunity from European cracker closures and is exploring markets for EPS exports from India, but notes that European PS demand is currently low, keeping Europe on the horizon rather than an immediate catalyst.
- Trade flow uncertainty: The outlook depends on how trade flows change and how American trade agreements shape up with the rest of the world; management is clear that the direction of trade flows remains unpredictable.
- Chinese competition view: Management believes Chinese costs would not be lower unless the producer has an integrated plant, and notes that most Chinese polystyrene plants are not integrated, implying a cost structure that does not undercut SPL.
Rakesh Nayyar: "So, we do not know which way trade flows will move and it will all depend upon the trade flows, the way they move ahead in the future now."
Product & Application Developments
- EPS 300HD for helmets: The company developed a new EPS grade 300HD specifically targeted at helmet manufacturing and is the only supplier to helmet manufacturers in India, holding 100% share of the organized sector.
- XPS insulation board gaining institutional traction: Sales are picking up from institutional projects including AIIMS, the Zozila Pass tunnel (Kashmir-Ladakh sector), the New Parliament House, and IIT Jodhpur, where air conditioning load was substantially reduced; however, retail adoption by individual house owners remains low due to extra cost and lack of contractor and architect knowledge on installation.
- EPS post-consumer waste visibility: EPS post-consumer waste visibility is high because it is used in packaging, OEM appliances, and disposable foodware; in contrast, PS goes into appliances with long lifespans (refrigerators, ACs, washing machines at 10+ years), so PS post-consumer waste is minimal.
Rakesh Nayyar: "XPS insulation board is a super product. The only issue there is that the individual houses owner, the row houses or the Bungalow or the small houses, they are the ones who are not using it... the sale from the institutional buyers is great."
Competitive Landscape & Capacity
- EPACK threat dismissed: Management stated they are not seeing any volume or pricing pressure from EPACK's capacity addition and expressed skepticism about the quantity claimed in the market, saying they have not seen any such quantity; they expect to maintain volumes.
- Polystyrene debottlenecking option: If required, the company can increase polystyrene capacity through debottlenecking at existing facilities, but this will be considered only after the ABS project is through.
- Haryana expansion timeline: The Haryana plant, which will produce downstream products and ABS compounds, is still two to three years away.
- EPS capacity deferred: The 24,000-ton EPS capacity is ready but commissioning has been deferred; the focus is on ABS first, after which this capacity will be commissioned.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| ABS Phase 1 commercial operations | Commence production and sales | Current quarter (Q2 FY26), by August end |
| ABS ramp-up | Operate at 50–60% utilization for the first six months, then begin ramping up | First six months post-commissioning |
| ABS FY27 utilization | Reach 80%+ capacity utilization | FY27 |
| ABS full-capacity top-line | ₹2,000 crores at 100% utilization | When full capacity is reached |
| Exports target | Reach 13–14% of revenue from exports | FY26 |
| ABS Phase 2 start | Begin Phase 2, efforts to start earlier | FY28 |
| Haryana plant | Commission downstream products and ABS compounds | Two to three years away |
| Polystyrene debottlenecking | Consider after ABS is through | No date (post-ABS) |
Key Metrics
| Metric | Q1 FY26 |
|---|---|
| Operating income (standalone) | ₹1,386 cr, declined 12% YoY |
| Operating EBITDA (standalone) | ₹115 cr, down 29% YoY |
| EBITDA margin | 9.36% |
| Net profit after tax (standalone) | ₹81 cr |
| Sales volume (manufactured products) | 93,853 MT, increased 0.5% YoY |
| Volume growth guidance (FY26) | 12%, combined with ABS; ABS contributing minimal volumes |
| Exports target (FY26) | 13% to 14% of revenue |
| Polystyrene capacity utilization | 81% to 82% |
| Value-added grade proportion | 36%, historical range 35% to 40% |
| Trading turnover | Closer to 20% of total sales |
| Investable surplus | Over ₹700 cr |
| ABS Phase 1 CAPEX | ₹600 cr |
| Ongoing CAPEX (FY26) | ₹200 cr to ₹250 cr |
| ABS project top-line at 100% utilization | ₹2,000 cr |
| Global ABS demand | Close to 1.2 crore tons |