Key Takeaways
- Volume-led quarter, margins normalizing: Total volumes grew ~28% YoY while EBITDA margins settled at 8.3%, as the abnormally high global deltas of last year have now returned to normal levels.
- Guidance intact despite OEM softness: Management maintained its 12% volume growth target for the year, even as polystyrene domestic sales grew only 3–4% in H1 due to weak OEM demand.
- ABS project on track, competitive landscape acknowledged: The first phase of ABS commissioning is set for end of next calendar year, and management sees enough demand room even as a competitor doubles capacity over the next 36–48 months.
- Exports remain a bright spot: The company expects to exceed 50,000 tons of exports this year, with volumes moving to Europe, Africa, and Asia.
- What to watch next quarter: Whether the seasonally stronger January–March quarter delivers the volume ramp needed to hit the full-year 12% growth target, and any update on the SPC division’s new compound approvals.
Volume & Demand Environment
- Strong headline volumes, uneven mix: Total volumes rose ~28% YoY in Q2 and ~18% in H1, but the growth was driven by EPS (domestic market up ~12.5% in H1) while polystyrene domestic sales grew only 3–4%, held back by weak OEM demand.
- Appliances dominate, but the rest is opaque: Management noted that ~35% of volumes go to appliance sectors; when asked for a breakdown of the remaining 60–65%, it gave only a general description of “various categories” without specifics.
- Seasonal tailwind ahead: The January–March quarter is always the strongest for volumes, a pattern management expects to hold again this year.
Nayyar: “The last year the global deltas were very high and which we had also then mentioned in our report that they are too good to be true to last also and now the Deltas between the styrene prices and the finished goods are kind of now settled down and at normal levels.”
Margins & Spreads
- EBITDA margin recovery from Q1 trough: Q2 EBITDA margin came in at 8.3%, up from the 7.0–7.3% range in Q1, as the ₹90 crore inventory hit from the prior quarter’s sharp styrene price fall did not repeat.
- No inventory gains this time: Styrene prices rose gradually to ~$1,050 in Northeast Asia, a pace that typically does not generate large inventory gains.
- Normalized deltas are the new baseline: Management stated that standard deltas of ~$200 for GP and $275–300 for HI now prevail, after last year’s unsustainably high levels settled down.
Exports
- Full-year export target reaffirmed: The company expects to do more than 50,000 tons of exports in the current year, with major destinations being Europe, Africa, and Asia.
- Destination split withheld: When asked for a regional breakup of export volumes, management declined to provide it.
- Product-wise export mix also undisclosed: An analyst asked how much of the 28,000 tons of H1 exports was polystyrene; management declined to give that breakup.
Expansion Projects
- ABS project timeline: The first phase of ABS will be commissioned by the end of the next calendar year, with an expected asset turn of 2.0–2.25x at full utilization.
- All expansions proceeding: Special polymer compounds (Phase 1 and Phase 2) and the ABS project, the largest of all capex items, are all continuing as per schedule.
- SPC division revenue potential: The 50,000-ton SPC capacity, with a mix of all grades, can generate revenue close to ₹750 crores, not reaching ₹1,000 crores.
- Competitor ABS expansion acknowledged: A competitor is doubling ABS capacity in the next 36–48 months; management believes domestic demand growth will create enough room for all players.
Nayyar: “they are talking of implementing and doubling their capacities in the next 36 months to 48 months. And by then, the demand in the country would also grow and there will be enough room for all of us to be playing in that play field of demand then.”
Product & Revenue Mix
- High-level revenue split disclosed: Approximately two-thirds of revenue comes from polystyrene, one-fourth from EPS, and the balance from SPC and XPS.
- Detailed product-wise data withheld: Management declined to provide product-wise volume and value figures when asked.
- Trading business margin undisclosed: When asked if trading profitability runs around 3–4%, management declined to give the number.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Volume growth | 12% volume growth target maintained | Full year FY24 |
| Export volumes | Exceed 50,000 tons | Current year |
| ABS Phase 1 commissioning | First phase operational | End of next calendar year |
| ABS asset turn | 2.0–2.25x at ~100% utilization | At full capacity |
| SPC division revenue potential | Close to ₹750 crores from 50,000-ton capacity | At full mix utilization |
| All expansion projects | Continuing as per schedule | Ongoing |
Key Metrics
| Metric | Q2 FY24 |
|---|---|
| Operating income | ₹1,278 cr, +3.5% YoY |
| Total volumes | +28% YoY |
| EBITDA margin | 8.3% |
| H1 FY24 revenue | ₹2,503 cr |
| H1 FY24 operating EBITDA | ₹197 cr |
| H1 FY24 PAT | ₹147 cr |
| H1 FY24 total volumes growth | +18% YoY |
| Volume growth guidance | 12%, management maintains target |
| Exports guidance | 50,000+ tons for FY24 |
| Trading revenue share | 23% of top line |
| Polystyrene revenue share | Two-thirds of manufactured products revenue |
| EPS revenue share | One-fourth of manufactured products revenue |
| Domestic EPS market growth (H1 FY24) | ~12.5% |
| Domestic polystyrene market growth (H1 FY24) | ~3% to 4% |
| Styrene monomer price (Northeast Asia) | ~$1,050 |
| GPPS delta | $175 to $200 |
| HIPS delta | $250 to $300 |
| EPS delta | ~$225 to $250 |
| SPC division 50,000-ton capacity revenue potential | ~₹750 cr |
| ABS phase 1 asset turn at full utilization | 2 to 2.25 times |
| ABS phase 1 commissioning | End of next calendar year |
| Q1 FY24 inventory loss | ~₹90 cr |