Key Takeaways
- Demand disappointment, not import pressure: Domestic polystyrene volumes grew only ~4% in nine months as appliance OEMs saw a ~5% demand contraction versus an expected 8–10% growth, while exports carried total volume growth to 12%.
- Spread compression bites: Global styrene-to-polystyrene deltas have shrunk by roughly $30–$40 versus the prior year, settling at the lower end of pre-COVID levels, though management sees them as maintainable at current levels.
- Red Sea disruption stalls export momentum: Freight rates spiked, container availability shrank, and cycle times lengthened, forcing a pivot to nearer Asian and Gulf markets; export volumes this quarter will likely fall below the run-rate of the prior three quarters.
- Three growth bets are now funded: A new North India plant (₹1,900 crore revenue potential at full capacity), an ABS line by calendar year-end, and a downstream push into 3D panels and engineering plastics sheeting all advanced this quarter.
- What to watch next quarter: Whether the Red Sea disruption eases enough to restore export volumes, the pace of domestic appliance demand recovery, and any movement in styrene-to-polystyrene deltas from their current floor.
Demand & Volume
- Domestic weakness concentrated in durables: AC and refrigerator segments are both down; washing machines held up but grew below expectations. Appliance demand for the full year is tracking ~5% below the prior year, against OEM forecasts of 8–10% growth.
- Exports did the heavy lifting: Total volume growth of 12% was driven entirely by exports, with domestic volumes up only ~4% over nine months.
- Seasonal QoQ drop is normal: The 13% sequential volume decline reflects the post-festive-season lull: supplies to processors were completed by late October, and November–December are structurally lean months across PS, EPS, and all end-markets. Year-on-year volumes were comparable.
- Imports are not the culprit: Polystyrene imports were marginally down year-on-year; the flat market is purely a function of weak consuming-industry demand.
Rakesh Nayyar: "No, right now the freight rates will go up, but then the time which will take will be also very high, the containers availability will reduce, the shipping availability, shipping space availability will reduce because the cycle is now longer. And then the consumers in Europe or in Turkey or in USA, they should be willing to pay the extra freight, which I don't know how it will shape, but as of now our exports they have got affected in the last quarter because of this reason."
Spreads & Margins
- Delta compression is the core earnings headwind: Styrene-to-polystyrene spreads have contracted by $30–$40 globally versus the prior year and now sit at the lower end of pre-COVID ranges. Management believes current deltas are maintainable and should improve when demand recovers.
- No inventory losses this quarter: Styrene prices were range-bound, so the company booked no inventory write-downs. Management expects styrene to stay range-bound barring a major Gulf disruption or external shock.
- Trading share is stable: Trading sales remain roughly one-quarter of total sales, with manufactured product at 76–77%, consistent across quarters.
Red Sea Disruption & Export Outlook
- Freight costs and container availability both deteriorated: The Red Sea crisis raised freight rates on routes to Europe, Turkey, and North America while simultaneously reducing container and shipping-space availability as cycle times lengthened. Exports were already affected in the December quarter.
- Near-term export volumes will dip: Management expects to export less this quarter than in each of the prior three quarters, with volumes redirected to Asian and Gulf markets that avoid the Red Sea crossing.
- Full-year export guidance trimmed: The company had expected ~50,000 tonnes of exports this year; that may now land closer to 45,000 tonnes depending on how the next two months shape up. Total volume growth guidance of 10–12% over last year is maintained.
- Recovery is conditional on Red Sea resolution: Management stated that once the Red Sea issue is settled, exports should return to prior levels, but offered no timeline for that settlement.
Growth Projects: North India, ABS & Downstream
- North India plant anchors a third growth hub: A new property in Haryana will serve a market that already accounts for ~40% of PS and EPS volumes, positioned near IOC’s upcoming styrene monomer plant at Panipat. At full capacity and current prices, revenue potential is close to ₹1,900 crore, with a simple payback of less than five years.
- ABS line on track for calendar year-end: The ABS line should be ready by end of this calendar year. The company has applied for BIS approval and hopes to secure it by the end of this quarter, after which seed marketing of mass ABS will begin shortly.
- Mass ABS covers 95% of applications directly: Management stated that mass ABS can substitute conventional ABS in ~95% of use cases; the remaining 5% requiring ultra-high impact can be addressed through second-stage compounding, giving the company coverage of 100% of applications.
- EPS phase two expansion also due by calendar year-end: Capacity expansion work continues and is expected to complete by December. XPS phase two is taking longer due to product sizing changes and an equipment re-look.
- Downstream entry into 3D panels and engineering plastics sheeting: At the Haryana location, the company will produce prefabricated EPS walls jacketed with iron mesh to promote 3D panel usage in construction, citing suitability for North Indian weather. Separately, a new line will convert engineering plastics (ABS, PC, PMMA) into sheeting as a lightweight, shatter-resistant glass replacement for partitions, cabinets, signage, and display shelves.
Rakesh Nayyar: "About 95% of all the users or applications where the conventional ABS is used, the mass ABS can be used in those applications. It's only because ours will be a mass ABS, so you can't really customize if you want smaller lot of sales, somebody wants very small quantity of a super, super high impact because where they do compounding they can add some more HRG there to give that kind of an impact. So for that we will have to do the compounding at the second stage for us and so that 5% what our mass ABS will not directly meet with compounding we can also take care of that 5%. So, we will be able to meet all 100% of applications."
Costs & Renewable Power
- Renewable power agreement signed with Tata Power: Starting Q1 FY25, up to 50% of power consumption at the Amdoshi (Nagothane) plant will come from renewable sources, delivering an estimated 30–40% saving per unit consumed versus current power cost.
- Absolute power cost impact is unquantified: When asked whether absolute power cost would still rise at 100% utilization, management acknowledged it had not run that calculation and could not provide a figure.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Total volume growth | 10% to 12% over prior year | FY24 full year |
| Export volume | ~45,000 tonnes (revised from ~50,000 tonnes) | FY24 full year, conditional on next two months |
| ABS line operational | Ready for production | End of calendar year 2024 |
| BIS approval for ABS | Approval received | By end of current quarter |
| EPS phase two capacity | Expansion completed | December 2024 |
| Renewable power supply | Up to 50% of Amdoshi plant consumption from renewables | Starting Q1 FY25 |
| Haryana plant revenue potential | Close to ₹1,900 crore at full capacity and current prices | At full capacity (no date given) |
| Haryana plant payback | Simple payback less than five years | From commissioning (no date given) |
| ROCE target | Upwards of 20% | No timeline given |
| Styrene-to-PS deltas | Maintainable at current levels; improve when demand grows | Conditional on demand recovery |
Key Metrics
| Metric | Q3 FY24 |
|---|---|
| Operating income | ₹1,187 cr, up ~0.6% YoY |
| Operational EBITDA | ₹95 cr, margin at 8% |
| Manufactured sales share | 76% to 77% of total sales; trading sales 23% to 24% |
| Total volume growth (9M FY24) | 12% YoY, driven by exports; domestic volumes up only ~4% |
| Polystyrene volume growth | 1.7% YoY; market was flat during the quarter |
| Appliance manufacturer demand | Down almost 5% vs previous year; initial expectation was 8% to 10% growth |
| Gross spread per kilo (9M FY24) | ₹24–₹25, almost a 30% decline YoY |
| Global deltas reduction | $30 to $40 lower vs previous year |
| Capacity utilization (polystyrene, EPS, SPC) | Around 70% |
| Export volume share | 16% of total volumes vs earlier range of 7% to 8% |
| Export volume guidance (FY24) | Closer to 45,000 tonnes, revised from ~50,000 tonnes due to Red Sea freight issues |
| Overall volume guidance (FY24) | 10% to 12% over last year |
| Master batch compounds share | Around 9% of total manufactured product revenue |
| Haryana project investment | ₹800 cr; full-capacity revenue potential ~₹1,900 cr at current prices; simple payback less than 5 years |
| ROCE target | Upwards of 20% |