Key Takeaways
- Volume growth on track, margins under raw-material pressure: Sales volumes rose 21.1% YoY in Q3, but declining styrene monomer prices compressed margins as higher-cost inventory met spot-based selling prices.
- Mass ABS Phase-1 is the near-term catalyst: Mechanical completion is due by end-March 2025, with commissioning and commercial launch in Q1 FY'26; management is confident of selling the output, citing 140,000 tonnes of existing imports.
- XPS remains a structural bet without a mandate: The product is approved by CPWD and used in institutional projects, but smaller contractors resist it in individual housing, and no government insulation mandate exists yet in India.
- Management sees a path from high single-digit to double-digit EBITDA: The lever is Mass ABS volumes and a second line, not a return to the abnormal 17-18% margins of FY22, which management calls an aberration.
- What to watch next quarter: Commissioning progress on Mass ABS Phase-1, the Q4 volume print against a 96,000-tonne comparable, and any stabilization in styrene monomer prices that would ease the margin squeeze.
Volume Performance & FY25 Outlook
- Broad-based volume growth: All segments performed well, with polystyrene marginally better than others; EPS and XPS also contributed to a 13.7% volume increase for the nine-month period.
- Full-year volume guidance maintained: Management expects to achieve approximately 350,000 to 355,000 tonnes for FY25, barring anything unforeseen in the final two months.
- Q4 FY25 volume expected flat YoY: Volumes should match last year's Q4 level of 96,000 tonnes, though exports may be lower this quarter.
- Export markets span OEMs and XPS manufacturers: Shipments go to Italy, Greece, Turkey, Egypt, and Bangladesh; GPPS is supplied for XPS production. A granular breakdown by application was not provided.
Mass ABS: The Margin & Growth Catalyst
- Phase-1 timeline is firm: Mechanical completion is targeted for end-March 2025, with commissioning and first commercial output in Q1 FY'26. Customer discussions are already underway with Versalis collaborators, and prospective buyers are enthused.
- Phase-2 to follow quickly: The company hopes to start Phase-2 in the coming financial year, betting that domestic demand will have grown further by then.
- The import substitution math is straightforward: India already imports roughly 140,000 tonnes of ABS annually; Supreme's Phase-1 adds only about half that volume, so management sees no marketing risk.
- Mass ABS carries a quality edge over emulsion grade: Better lot-to-lot consistency, lower base colour, superior UV and thermal stability, lower gel content for improved surface quality, reduced VOCs for less interior odour, and improved thermoforming properties.
- Pricing strategy starts at parity, aims for a premium: In India, the product will initially be priced at the same level as emulsion grade since that is what customers currently use. Globally, Mass ABS commands a premium, and management expects that to eventually happen in India as well.
Nayyar: "In India, once we start marketing, it will be certainly at the same price because everyone is currently using the emulsion grade. But as I said in markets like Europe, it carries a premium."
Margin Dynamics: Pressure Today, Improvement Tomorrow
- Declining styrene monomer prices compressed spreads: Raw material contracted earlier at higher prices arrived at elevated cost, while selling prices are determined on a spot basis, squeezing margins during the quarter. Styrene prices are now stabilizing.
- EBITDA percentage is a misleading metric here: Management argues that higher raw material prices mechanically depress EBITDA in percentage terms, making the ratio a "myth" for assessing underlying profitability.
- The FY22 margin peak was an aberration, not a baseline: Those 17-18% EBITDA margins reflected post-COVID global disruptions, plant shutdowns, and accidents that created abnormally wide deltas. Historically, the business has operated in higher double-digit EBITDA territory in normal times.
- The path to double-digit EBITDA runs through ABS: With Mass ABS volumes coming in and a second line to follow, management expects to cross from high single-digit EBITDA into double digits. The long-term aspiration is approximately 13% EBITDA, not a return to FY22 levels.
- Fixed-cost leverage from co-location: Since ABS is being built at the same site, administrative and plant management fixed costs will not rise proportionally, improving unit economics.
- Power costs partially hedged: The company has installed the maximum permissible solar power and has saved roughly 25% of its power cost. Additional solar capacity will be added for ABS's incremental power requirement.
- Freight costs remain a structural headwind: Global freight rates are still as high as 3x pre-pandemic levels for some markets.
Nayyar: "With the Mass ABS coming in, and their volumes going up, and with the second line of Mass ABS coming up, we expect that, we should from high single-digit EBITDA, cross to double digits then."
XPS: A Structural Story Waiting for Policy
- The product works, and institutions know it: XPS has been cleared by CPWD and is used in central government projects; some state governments have also approved it in their PWD booklets. Bigger and institutional projects prefer the product.
- The bottleneck is the individual housing segment: Smaller contractors resist using XPS in individual housing, telling owners it will increase cost without explaining the insulation benefits. No government mandate exists in India, unlike in Europe, the Gulf, and China.
- The company is building demand from the ground up: A dedicated team markets in smaller towns, runs roadshows, and engages with architecture colleges to educate future specifiers about the product.
- Capacity utilization is a 2-3 year story: Management hopes to load not only the current XPS capacity but also the expanded capacity over the next two to three years.
Nayyar: "The smaller contractors, when they do the individual housing, they hesitate using it because they don't want to use it or they tell the owners that it will increase their cost, but they do not inform them the benefits of using this."
Haryana: The Next Growth Platform
- Pre-project activities have begun: Land has been acquired in Haryana, and project implementation is expected to start towards Q3 FY'26.
- The site will be a multi-product complex: It will manufacture polystyrene, expandable polystyrene, and downstream products including 3D boards from EPS, sheetings of polystyrene and ABS, and XPS insulation boards.
- Phased rollout starting with downstream: The company expects to start with downstream units sometime in FY26, with all other projects coming up in phases thereafter. Polystyrene and EPS will be timed with the implementation of IOC's styrene monomer plant.
- Downstream products should improve the margin profile: Since these are more value-added products, management expects the overall margin mix to change for the better.
- SPC compounding business to double: With ABS coming online, the compound business is expected to double within the next two years.
Cost Structure & Operational Efficiency
- Plant automation is an ongoing effort: Cost reduction through automation will continue as a permanent initiative, not a one-time project.
- Forex impact is passed through and hedged: Depreciation-driven cost increases are built into selling prices, and the company also hedges to the extent of its exports.
- Management declined to provide granular segment data: Requests for blended realizations in the SPC segment, export volume breakdowns by application, and nine-month export volumes were all declined.
- Long-term EBITDA or gross spread guidance was also declined: Management stated it is very difficult to predict those metrics.
Nayyar: "It was an aberration when the global deltas because of the freight rates, because of the post-COVID, many plants were shut down, some plants had accidents globally. So, the deltas were very high and resulted in higher margins."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| FY25 volume | Achieve ~350,000 to 355,000 tonnes | FY25 full year (barring unforeseen events in next 2 months) |
| Q4 FY25 volume | At same level as Q4 FY24 (~96,000 tonnes); exports maybe lower | Q4 FY25 |
| Mass ABS Phase-1 mechanical completion | End-March 2025 | End of Q4 FY25 |
| Mass ABS Phase-1 commissioning and commercial launch | Product to come out in Q1 FY'26 | Q1 FY'26 |
| Haryana project implementation start | Towards Q3 FY'26 | Q3 FY'26 |
| Haryana downstream units start | Sometime in FY26 | FY26 |
| SPC compounding business | Double in the next 2 years | FY27 |
| XPS capacity utilization | Load current and expanded capacity | Next 2 to 3 years |
| Long-term EBITDA margin | Reach ~13% EBITDA (not 17-18% of FY22) | No date; path is via Mass ABS volumes |
Key Metrics
| Metric | Q3 FY25 |
|---|---|
| Operating income | ₹1,405 cr |
| Total EBITDA | ₹116.70 cr |
| Net profit after tax | ₹71 cr, grew ~5.5% YoY, PAT margin 5.08% |
| 9M FY25 revenue | ₹4,484 cr |
| 9M FY25 EBITDA | ₹443 cr, EBITDA margin 9.87% |
| 9M FY25 net profit after tax | ₹284 cr, increased ~32% YoY, PAT margin 6.32% |
| Sales volumes of manufactured products | +21.1% YoY for Q3, +13.7% YoY for 9M |
| Full-year volume guidance | ~350,000 tonnes, ~8% growth vs 325,000 tonnes last year |
| Q4 FY25 volume outlook | More or less same as last year Q4 of 96,000 tonnes |
| Investible surplus | ₹680 cr, company remains debt-free |
| Mass ABS Phase-1 capacity | 70,000 tonnes per annum, mechanical completion by end March 2025, commissioning Q1 FY26 |
| Styrene price decline | ~11-12% in September to December quarter |
| Spot polystyrene margins | $200 and $250 per tonne |
| Hedging policy | 50% to 65% of forex exposure hedged |
| Power cost savings from solar | 25% of power cost saved |