Key Takeaways
- Volume-led recovery, conditional on geopolitics: Management guided 8–10% volume growth for FY27, but only if the West Asia conflict normalizes by June end and global markets stabilize in July.
- ABS plant back online at reduced rate: Manufacturing restarted at ~65% of design capacity after an alternate arrangement for failed critical equipment; full capacity awaits a time-consuming repair.
- March styrene spike disrupted demand: Styrene monomer prices surged from ~$1,000/ton to a peak of ~$1,650/ton on Strait of Hormuz disruption, then moderated to ~$1,500/ton; the resulting high polymer prices killed non-OEM demand in April.
- EPS expansion commissioned on schedule: Phase-II at Nagothone took EPS nameplate capacity from 85,000 to 115,000 tons per annum, with exports now on the agenda after European grade approvals.
- What to watch next quarter: Whether styrene prices and shipping normalize to unlock the 8–10% volume guidance, the pace of ABS utilization recovery, and the magnitude of any inventory loss if prices keep falling.
Volume & Demand Dynamics
- Q4 revenue grew 3% YoY to ₹1,587 cr on higher volumes and better spreads, supported by seasonally stronger demand.
- FY26 full-year revenue fell 11% YoY because average styrene monomer prices dropped ~17% YoY, pulling down realizations despite nominal volume growth.
- OEM demand held up: OEMs are buying at increased prices as it is their season, and management is not entering new contracts with them due to fluid raw material pricing and elevated freight costs.
- Non-OEM demand collapsed in April: High prices, contract labor unavailability (workers returned to villages), and gas supply shortages for processing combined to shrink the non-OEM market substantially.
- Higher styrene prices kill demand: Management pushed back on the assumption that higher styrene automatically means better profitability, explaining that sectors which can wait simply stop buying, supply chains empty old stock, and falling prices later create inventory loss risk.
Rakesh Nayyar: "The higher price of styrene, if it leads into a better spread as far as polystyrene is concerned, yes, then it is beneficial, but then it generally doesn't happen because higher styrene monomer prices kills the demand, particularly the sectors which can wait..."
Raw Material & Supply Chain
- Styrene prices were stable until February 2026 within a +/-10% range, then spiked sharply in March following the West Asia conflict and Strait of Hormuz supply disruption.
- Alternate sourcing activated: While Middle East shipments were impacted, the company met domestic demand through sufficient inventory in transit and sourcing from Asia and China.
- Shipping normalization is the gating factor: Adequate arrangements are in place for raw material availability going forward, but the situation eases fully only when normal shipping through the Strait of Hormuz resumes.
- Management declined to quantify the styrene monomer sourcing breakdown by geography (Gulf vs China vs US), stating only that meeting domestic demand is the focus right now.
ABS Plant: Setback & Recovery
- Critical equipment failure: One piece of critical equipment developed a snag requiring removal and repair, a time-consuming process; collaborators provided an alternate arrangement enabling operation at 65% of original rated capacity.
- Phase I utilization target: Management expects to do close to 80–90% of capacity this year despite the equipment issue.
- Phase II still on track for FY28: Work on the second line continues irrespective of the current equipment problem.
- Import duty removed: The government removed import duty on ABS, a policy change management noted without quantifying the competitive impact.
- End-market mix ambition: The company eventually wants to be in all segments and reflect the industry mix of roughly 50-50 OEM to non-OEM once ABS grades are fully established.
Rakesh Nayyar: "We had an unfortunate incident that one of the critical equipment had developed some snag and that is something serious because it has to be removed and then repaired and which is time-taking process. But then our collaborators have at least found an alternate arrangement for us for which we are able to operate at 65% and which we are doing now."
Specialty Products: Xmold & Compounding
- Xmold customer onboarding progressing: Two OEM customers mentioned in the prior call are on board and receiving orders; a third automobile OEM is now supplying material through their tier-one supplier; two AC manufacturers in Sri City have been onboarded.
- Xmold utilization was only 40–45% in FY26 of installed capacity; FY27 is expected to reach 65–70% after streamlining and cleanup, with volumes targeted 50–60% higher than FY26.
- Compounding volume ambition: Management hopes to reach 50,000 tons by FY28, if not FY27.
- Specialized PS grades command a premium of ~$200+ over commodity grades; the company is present in all refrigerator and AC grades.
- EPS demand was strong last year from packing, construction, and cold storage segments despite price sensitivity.
Capex, Balance Sheet & Working Capital
- Debt-free with ₹700 cr investable surplus: All capex is funded through internal accruals.
- FY27 capex guided at ~₹250 cr for the company as a whole.
- Haryana project on hold for big spending: No commitment for polystyrene or EPS projects until there is clarity on IOC's styrene monomer plant commissioning date; only infrastructure and related spending will proceed for now.
- Working capital swelled: Debtors rose to ₹520 cr because selling and purchase prices went up in March, plus ABS inventory and volumes came in; management expects normalization once the situation stabilizes.
- Polystyrene de-bottlenecking under evaluation but management declined to give any timeline.
Inventory Risk & Profitability
- No inventory gain/loss segregation: Gains and losses are booked as transactions happen and are not separately identified; management called estimating inventory gains or losses "next to impossible at the moment" given the dynamic price environment.
- Falling prices create inventory loss exposure: With styrene down from the $1,650/ton peak to ~$1,500/ton, supply chains emptying old stock at lower prices poses a risk if the decline continues.
- EBITDA outlook cautiously constructive: If the situation normalizes, volumes will be better and the company should do better than last year, but management declined to give directional guidance for the first three months.
- Management declined to answer on PBT break-even capacity for ABS, calling it very difficult to predict given internal consumption dynamics.
Rakesh Nayyar: "It's difficult to assume. Because the last month the prices were at $1,650 a ton, and today they are ruling around $1,500 a ton. So, this is something which is very dynamic, and estimating this is very, very difficult, rather next to impossible at the moment."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Volume growth | 8–10% volume growth for FY27 | Conditional on West Asia conflict normalizing by June end and global markets stabilizing in July |
| ABS Phase I utilization | Close to 80–90% of capacity this year | FY27 |
| ABS Phase II commissioning | Second line work continues irrespective of current equipment issue | FY28 |
| Xmold volumes | 50–60% more than FY26 | FY27 |
| Xmold utilization | 65–70% of installed capacity | FY27 |
| Compounding volumes | Reach 50,000 tons | FY28, possibly FY27 |
| FY27 capex | ~₹250 cr for the company as a whole | FY27 |
| Haryana major capex | Big monies deployed only after clarity on IOC's SM plant commissioning date | No date; infrastructure spending continues in the interim |
| OEM contracts | Resume regular contracts with OEMs | Once the raw material and freight situation normalizes |
| Working capital | Return to earlier levels | Once things become normal |
Key Metrics
| Metric | Q4 FY26 |
|---|---|
| Revenue from operations | ₹1,587 cr, +3% YoY |
| Operating EBITDA | ₹253 cr, +75% YoY |
| Operating EBITDA margin | 15.9% |
| Total EBITDA | ₹264 cr, including other income |
| Net profit after tax | ₹168 cr, PAT margin of 10.59% |
| Sales volume (manufactured products) | 100,664 tons, +5.4% YoY |
| FY26 revenue from operations | ₹5,338 cr, -11% YoY, on lower average styrene monomer prices |
| FY26 operating EBITDA | ₹515 cr |
| FY26 total EBITDA | ₹558 cr, margin of 10.37% |
| FY26 net profit | ₹327 cr, margin of 6.13% |
| FY26 sales volume | 363,203 metric tons, +2% YoY |
| Capacity utilization (FY26) | Over 80% |
| Investable surplus | ₹700 cr as at end of March 2026 |
| Total dividend for FY26 | ₹10.5 per equity share, face value ₹2 each |
| ABS plant operating rate | ~65% of design capacity, reduced to ~45,000 tons from 70,000 tons |
| EPS capacity post Phase-II expansion | 115,000 tons per annum, up from 85,000 tons at Amdoshi complex |
| FY27 CAPEX guidance | Around ₹250 cr for the Company as a whole |
| Trading sales proportion | ~18% of total turnover in Q4 |
| Xmold utilization (FY26) | ~40-45% of installed capacity |
| Xmold expected utilization (FY27) | 65% to 70% of capacity |
| OEM vs non-OEM demand split | Roughly 50-50 or 45% OEM, 55% non-OEM |
| GP polystyrene spread (current) | ~$275/MT, up from ~$200/MT pre-war |
| Styrene monomer price (current) | ~$1,500/ton, moderated from peak of ~$1,650/ton |
| FY27 volume growth guidance | 8% to 10%, subject to normalization by June end |