Key Takeaways
- Revenue surges on volume and mix: Q1 revenue jumped to ₹235 crores from a ₹160-170 crore run rate, driven by export volume growth and a shift to higher-premium sheets.
- Raw material tailwind is still in transit: Softer input prices have started helping margins, but the full benefit is delayed because high-cost inventory booked 2-3 quarters ago is still arriving.
- Acrylic solid surface is the new growth leg: A second machine is nearly operational, US export orders are confirmed, and management targets ₹100 crores in revenue this fiscal year.
- Domestic market is the acknowledged puzzle: Despite a built-out distributor network and a "European quality on Indian price" pitch, domestic revenue is stuck at ~₹65 crores while exports leap ahead.
- What to watch next quarter: Whether the raw material cost lag closes and lifts gross margin back toward 46%, and whether the acrylic surface business delivers its promised jump past ₹10 crores in Q2.
The Quarter: What Drove the Jump
- Export engine fired on all fronts: Export share jumped significantly from the ₹105-115 crore range of the prior three quarters, with volume increases and a mix shift toward higher-premium sheets improving realization.
- No backlog distortion: The export revenue jump is clean: no backlog from the previous quarter was booked in Q1.
- Domestic stuck despite infrastructure: Domestic revenue held at ~₹65 crores even as the distributor/dealer network was built out across India and an influencer division began working.
- Raw material softening began to flow: Softer raw material prices helped improve margin and PAT in Q1, but the benefit is partial because import bookings are done 2-3 quarters in advance and old higher-cost material is still arriving.
- Ocean freight inflated other expenses: Other expenses rose to ~₹50 crores (from ₹35-40 crores) solely due to higher ocean freight; management notes freight is reducing day by day but the line item appears high because sales and volume increased.
- Currency impact muted: Imports are ~50-55% of purchases, providing a natural hedge, so currency moves had limited effect.
- Price hikes were a Q4 story: Export price hikes were taken in Q4 FY22; in Q1 FY23, with raw material prices stabilizing worldwide, volume and product mix drove the realization increase. Domestic prices remained unchanged from Q3 FY22.
Jagdish Gupta: "Every raw material is going softened day by day. The system which we have like the softening is there it will more be effective on the coming month, maybe in this quarter or next quarter. As our booking is done in advance which we buy from import. We have to plan for two to three quarters."
Margin Mechanics: The Lag and the Recovery
- Gross margin compressed by input-cost pass-through lag: Value addition fell from ~48% to 42-43%, a 300-400 bps gap, because raw material prices had increased earlier and were passed through to customers with a delay. Management expects this gap to be covered in extent in coming quarters.
- Contribution margin still below trend: Q1 FY23 contribution margin was 43% versus 46% in FY22 and FY20; the benefit of lower raw material prices is still to flow through because inventory is at old prices.
- Operating leverage already visible: EBITDA increased due to revenue generation, sales increase, and cost reduction; management says operating leverage has already been achieved.
- Domestic expenses to grow slower than sales: Employee cost and freight will increase a little, not proportionately, as sales rise.
- Debt-free in sight: Financial cost is declining day by day; management says the company may get debt-free this year.
Jagdish Gupta: "Previously it had come, why it will not come now? As the sale will increase, expenses will decrease, raw material price, total proportionate, electricity, coal, anything will be needed proportionately automatically, down will come. Financial cost is getting down day by day still we may get debt free this year."
Acrylic Solid Surface: The New Growth Vector
- Second machine nearly ready: The second acrylic solid surface machine is already installed and placed on the floor, 99% complete, and will be operational within two months.
- Domestic distribution goes live: From July onward, acrylic solid surface under the Granex brand is available at four C&F locations: Delhi, Calcutta, Bangalore, and one more.
- US export orders confirmed: The company is receiving blank and open export orders for solid surface from the USA.
- Raw material substitution secured: Hindalco has been qualified as an Indian substitute for imported raw materials in the surface business, which should support margins as volume scales.
- Revenue ambition: Management expects Q2 FY23 surface revenue maybe definitely more than ₹10 crores, and up to ₹100 crores for the full fiscal year (three quarters, eight months remaining).
- Capacity built for scale: Surface business capacity of ₹400-500 crores has been built; the timeline for achieving it is not specified.
- Margin profile expected to converge: As volume increases, with Indian raw material substitutes and automatic machines requiring less labor, the margin profile is expected to become similar to the lamination business where targets were achieved.
Domestic Market: The Unsolved Puzzle
- Performance gap is stark: While exports surged, domestic revenue remained stuck at ~₹65 crores. Management expresses visible frustration that European markets accept their products but the Indian market does not, despite the "European quality on Indian price" positioning.
- Infrastructure is in place: The distributor and dealer network has been built across almost all of India, and an influencer division is now working on market penetration.
- Organized sector holding price: Unorganized players reduced prices as raw material softened, but organized companies including Stylam have not decreased prices. Management says the brand is getting stronger and there are no plans to decrease domestic prices.
- Distribution skew: The company is strong in South India, followed by North, then West and East. The Indian domestic market is dominated by South, second is West, followed by North and East.
- Ranking ambition: Stylam is currently in the Top 10 in the Indian market and aims to become a major challenger.
Jagdish Gupta: "We are trying to push that, we will try to get a good muhurta from God, we will do some puja and all that what is the matter that if European are liking us then what problem Indians are having with us. We are thinking about it, trying to figure out the formulae."
Manav Gupta: "We have not decreased the prices as of now because organized companies have not decreased prices, only unorganized companies, little few unorganized companies have decreased prices. So, definitely now as our brand is getting stronger, we have no plans to decrease prices."
Capacity Expansion and Capital Allocation
- ₹40 crore expansion underway: The investment will increase quantity by no more than 20-25%, but the value base can rise more than 40% because the focus is on more value-added items, not cheaper-quality sheets.
- Incremental revenue target: Management expects ₹400-500 crores of incremental revenue from this new investment.
- Timeline: The expansion will come on stream within this financial year, by end of FY23.
- Current plant ceiling: Combining the two existing lines, the plant can go up to ₹1,500 crores from total operations.
- No fund-raising: Management has no plans to raise funds; if EBITDA keeps coming, the company will distribute with shareholders and partners.
- Next product after saturation: After taking saturation next year, the company will go for another product. Ply entry has been put on hold because there are better opportunities; MDF and particle board are not being considered.
Jagdish Gupta: "This cannot be, everything is not to be considered as value, only quantity. I have told this earlier also if the sheet is same, like it is sold at 300 or 1200 of 1500 then we are going for more value addition items. This is the main purpose."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Raw material benefit flow-through | Softening benefit to become more effective as old high-cost inventory clears | This quarter or next quarter |
| Gross margin gap recovery | 300-400 bps gap (48% to 42-43%) to be covered in extent | Coming quarters |
| Acrylic surface revenue | Q2 above ₹10 Cr; FY23 up to ₹100 Cr | Q2 FY23 / FY23 |
| FY23 top-line growth | 30% growth maintained; "definitely, it can be more" | FY23 |
| FY23 turnover | Conservative target around ₹1,000 Cr (laminate + acrylic) | FY23 |
| EBITDA margin | 15% to 20% expected this year; 20% margin "will come back" | FY23 |
| Debt-free | May get debt-free this year | FY23 |
| Capacity expansion on stream | ₹40 Cr investment yielding ₹400-500 Cr incremental revenue | By end of FY23 |
| Second acrylic machine operational | Already installed, 99% complete | Within 2 months |
| Domestic market target | Earlier ₹350-400 Cr target "still undervalued" | "Maybe this or next quarter" |
| Export trajectory | Sustainable at least for the next quarter, barring another COVID wave | Next quarter |
Key Metrics
| Metric | Q1 FY23 |
|---|---|
| Revenue | ₹235 cr, highest single-quarter record |
| Export revenue | ₹169–170 cr |
| Domestic revenue | ₹65 cr |
| Solid surface revenue | ₹3–4 cr |
| PAT | ₹15 cr, up from ₹11 cr in Q4 FY22 |
| Gross margin (value addition) | 42–43%, down from ~48% earlier, a gap of 300–400 bps |
| Laminate volume | ~27 lakh sheets |
| Other expenses | ~₹50 cr, up from ₹35–40 cr run rate due to ocean freight |
| Ocean freight per unit | ₹6,000, down from ₹8,000 peak, originally ₹800 |
| Imports share of purchases | 50–55% |
| Acrylic business revenue | ₹1–2 cr currently; Q2 FY23 expected more than ₹10 cr; FY23 target up to ₹100 cr |
| FY23 top-line growth guidance | 30%, "definitely, it can be more" |
| Capacity expansion investment | ₹40 cr, expected incremental revenue of ₹400–500 cr |
| Capacity utilization | 80% |
| India laminate exports (industry) | ₹2,400–2,500 cr in FY22 |