Key Takeaways
- Sharp margin recovery underway: Gross margins rebounded from 11% to 16% as raw material cost pressure from older inventory eased, with management targeting a return to the 20% level.
- Acrylic Solid at an inflection point: Revenue was just ₹5-6 crore in Q2 but is guided to jump to ₹15-20 crore in Q3 as the second line commissions and US containers land.
- Domestic laminates scaling fast: H1 quarterly run-rate improved from ₹66 crore to ₹82 crore, driven purely by market acceptance and distribution reach, with full-year revenue guided at ₹325-350 crore.
- Export strength defies recession fears: Exports grew across Europe, Middle East and Far East; management dismissed construction slowdown risk, stating "building constructions will not stop due to recession."
- What to watch next quarter: Whether Acrylic Solid revenue actually hits the ₹15-20 crore guided range, the pace of gross margin recovery toward 20%, and the trajectory of declining ocean freight costs.
Margin Recovery & Cost Tailwinds
- Raw material relief arriving: Chemical raw material prices (melamine, phenol) are declining, not increasing; the raw materials consumed in Q2 were imported in Q1 at higher prices, so the benefit of recent price drops will flow through in coming quarters.
- Gross margin trajectory: Margins improved from 11% to 16% QoQ; management hopes to return to 20%. An analyst estimated 400-500 bps of margin loss was attributable to raw material cost, which management endorsed as "very good analysis" for the raw material portion but clarified freight was not a 5% margin loss.
- Ocean freight normalizing: Freight impacted imports by 6-7% but is now declining and expected to normalize by December to levels of two years back. Export freight surcharges, introduced earlier, are being gradually reduced as costs fall.
- Operating leverage in domestic business: As domestic sales increase, margins will improve because expenses (capital cost, labor) do not rise proportionally; labor and employment remain largely the same while sales grew ~50% YoY.
- Export margin benefit: When export sales increase substantially, remainder expenses decline; the benefit from raw material cost reduction on exports will be around 4-5%.
- No price cuts taken: No price cuts have been made in any market (domestic or exports) in Q2 or the last 4 months; prices had not increased dramatically earlier so there was not much need for cuts.
Gupta: "Their raw material prices have increased so much... India is much economical for them. I do not think that our product will face any problem in Europe."
Acrylic Solid: The Next Growth Engine
- Q2 was the starting point: Acrylic Solid contributed ₹5-6 crore in revenue in Q2 FY23, with management stating the business is going in a "very good right direction" with exports to many countries and repeat orders, and USA orders expected very soon.
- Second line imminent: Korean personnel remain on-site for commissioning; the second line is expected to be operational by end of October or early November 2022, which will unlock the guided revenue ramp.
- Q3 revenue guided at ₹15-20 crore: Management expects a jump from ₹5-6 crore in Q2 to ₹15-20 crore per quarter from Q3 FY23 onwards. Q4 projection is 3,000 sheets/month, with export potential up to 10,000 sheets/month.
- US entry underway: A container has already reached the USA; sheets have arrived. USA orders are expected by end of October or early November. Export containers to the US take 2-2.5 months to reach.
- Margin profile improving: Currently utilizing only 10-15% of capacity; margins are expected to improve after 2-3 quarters as capacity utilization increases and costing reduces. Management expects solid acrylic margins to be above 15%.
- Asset turnover potential: On the ₹50-60 crore investment, potential turnover of ₹400-500 crore is possible, possibly in 2-3 years.
- Brand protection stance: Management is refusing OEM arrangements that would fill capacity but erode the brand: "many people want to take the whole company as an OEM. We are not interested to give the total plant because then our brand value will diminish." This stance is part of why they remain hopeful about export potential.
Gupta: "My container has already reached USA; sheets have already gone there. I have no idea, it may happen after 2 months or maybe after 4 months, but it will definitely happen, you can take my word."
Domestic Laminates: Distribution-Led Scale-Up
- Run-rate stepping up: H1 FY23 domestic revenue run rate improved from ₹66 crore to ₹82 crore quarterly; full-year domestic laminates revenue is expected at ₹325 crore to ₹350 crore.
- Market-driven, not pushed: Management stated "there is no push, everything is market driven share" and attributed growth to an established dealer/distributor network, 6 RDCs, and improved quality perception as more people visit the plant and see the products.
- Distribution depth: Approximately 5,000 quality distributors are developing faith in the Stylam brand; presence is building across India (South and North currently, with plans to expand to all India slowly).
- Domestic margin trajectory: Export margins are currently higher than domestic, but as domestic scale increases, expenses will reduce and domestic EBITDA will improve. Management declined to quantify the exact margin gap, stating "we have never calculated separately... we can do this calculation in the next meet."
- Brand investment planned: Management plans to give TV ads, having already done IPL branding two years ago; the goal is to build a total base in the India market.
- Working capital normalizing: Domestic credit market is 60-90 days for everyone; stretch occurs when entering new markets but eases as brand value increases, eventually to 45 or 30 days. No stress in exports where credit is limited to 30-40 days.
Gupta: "We are going on that direction too but our first target is this only, we will go slowly-slowly, the mistake that we had done earlier, we are not going to repeat that mistake."
Export Performance & Geographic Mix
- Broad-based export growth: Growth is happening across Far East, Europe, and the Middle East; the Americas (North and South) are described as "little weak." US sales are not that large for Stylam, limiting direct recession exposure.
- European advantage: Management argued that European manufacturers face much higher raw material prices, making India "much economical for them," and does not expect Stylam's product to face any problem in Europe.
- Export realization premium: Exports fetch substantially higher realization than domestic for the same quality sheet. Export margins are higher than domestic.
- Freight surcharge phase-out: Stylam had started charging an extra export freight surcharge earlier; this is now being gradually reduced as freight costs decline, with normalization hoped for by December-January.
- Currency volatility managed: The euro fluctuates up to Rs. 2 in a single day; management noted that under these circumstances, performance is good. Positive currency fluctuation contributed ₹4-5 crore in Q2 FY23.
Gupta: "Nothing will happen, recession will take place but building constructions will not stop due to recession. I do not feel any recession is there."
Capacity, Product Mix & New Launches
- Laminates utilization at 80-82%: Units are running at 80-82% capacity; management is undertaking modifications and balancing of equipment expected to take 6-8 months to increase capacity without adding new lines.
- 40% capacity increase underway: Being done slowly through balancing of equipment; need-based, with maximum spread over one year if CAPEX is required.
- Thickness mix drives volume, not capacity: Management pushed back on fixed capacity numbers, stating that higher thickness reduces total sheet volume while thinner sheets increase it: "1.4 crore, 1.5 crore does not matter. We will go for higher thickness, then maybe it will go to only 1 crore."
- MDF laminates launched: A new product, "laminates on MDF panels," has been introduced; the machine was installed two years ago (pre-Corona) and recently launched. The product is anti-fingerprint, high-gloss, used in expensive kitchens, and already in the European market.
- MDF revenue potential: An analyst's estimate of ₹25-30 crore per year was called "very conservative" by management, who said it is "definitely" achievable. Margins on MDF laminates are better than standard laminates.
- Non-laminate margin profile: Margins on non-laminate products are a little better than laminates.
Gupta: "Every call I get this question; 1.4 crore, 1.5 crore does not matter. We will go for higher thickness, then maybe it will go to only 1 crore, if you go for very thin, total volume then it can go even 1.8 crore."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Acrylic Solid quarterly revenue | ₹15-20 crore per quarter (vs ₹5-6 crore in Q2) | Q3 FY23 onwards |
| Full-year domestic laminates revenue | ₹325-350 crore | FY23 |
| Gross margin recovery | Return to 20% level | Not specified; "hopes to return" |
| Ocean freight normalization | Normalize to levels of two years back | By December |
| Freight surcharge phase-out | Reach almost same type as pre-surge levels | By December-January |
| Solid acrylic margins | Above 15% | After 2-3 quarters as utilization increases |
| Solid acrylic asset turnover | ₹400-500 crore on ₹50-60 crore investment | Possibly in 2-3 years |
| Laminates capacity increase | 40% increase through equipment balancing | 6-8 months for modifications; up to 1 year if CAPEX required |
| FY23 non-laminate revenue | ₹100 crore target (plus or minus 10%) | FY23 |
| FY25 revenue doubling vision | On track; no new aspiration shared | By 2025 |
Key Metrics
| Metric | Q2 FY23 |
|---|---|
| Revenue | ₹246 crore |
| H1 FY23 revenue | ₹480 crore |
| Gross margin | 16%, previously 20%, had decreased to 11% |
| Forex gain | ₹4-5 crore positive impact |
| Full-year domestic laminates revenue guidance | ₹325 crore to ₹350 crore |
| Full-year laminate revenue target | ₹900 crore |
| Full-year non-laminate revenue target | ₹100 crore, on track, may vary 10% plus or minus |
| Sheet volume | 0.32 crore sheets |
| Laminates capacity utilization | 80% to 82% |
| Domestic laminates volume | 13.5 lakh sheets in Q2, 23.5 lakh in H1 |
| Export laminates volume | 18.6 lakh sheets in Q2, 35.6 lakh in H1 |
| Acrylic Solid revenue | ₹5 crore to ₹6 crore |
| Acrylic Solid revenue guidance Q3 onwards | ₹15 crore to ₹20 crore per quarter |
| Domestic channel distribution network growth | 21% increase in H1 FY23 vs FY22 |
| Europe share of total sales | 20% to 22% |
| Europe share of total export sales | 35% to 40% |
| Ocean freight (Europe) | $3,000 per container, down from $9,000 |