Key Takeaways
- Acrylic ramp-up hits stride: The new acrylic plant, India's first, crossed Rs.4 Crores in monthly turnover and management set a hard FY24 revenue target of Rs.50 Crores, staking the plant's future on it.
- Bold capex for a niche product: A Rs.150 Crores investment in a fully automated plant for a new value-added HPL product is targeted to start before March 2024, with a minimum Rs.500 Crores revenue potential in 2-3 years.
- Margins poised to recover: Management expects laminate margins to return to 20% in Q1 and sees 100-150 bps of full-year margin improvement, driven by better brand reach, lower freight costs, and operating leverage.
- Working capital tightens sharply: Receivable days improved to 48 from 66, the lowest in over a decade, as the company pushes toward cash payment terms domestically and reduces inventory.
- What to watch next quarter: Whether the acrylic business sustains its Rs.4 Crores+ monthly run-rate, the timeline for the new plant breaking ground, and the actual recovery in laminate margins to the 20% target.
The Acrylic Bet: From Teething to Scale
- Plant performance: After initial teething problems, the acrylic plant is now performing excellently, with monthly turnover exceeding Rs.4 Crores and domestic sales increasing day by day.
- Quality parity: Market feedback confirms the quality is now 100% comparable to Korean imports, positioning it as a direct import substitute.
- Export push: The company is entering multiple export markets, adding 1-2 new customers per month across the USA, Israel, Philippines, Singapore, and Taiwan, and exhibited at a trade fair in Germany.
- Anti-dumping shield: An application has been filed with the government for anti-dumping duty on subsidized Korean acrylic imports; management is "quite hopeful" the request will be accepted, which would structurally improve the domestic pricing environment.
- Margin trajectory: Acrylic margins are currently depressed at 5-6% utilization but are expected to match or exceed laminate margins as utilization scales toward the Rs.400 Crores total capacity potential.
Jagdish Gupta: "If we cannot get Rs.50 Crores then there is no use. We will close down the plant."
New Product Capex: The Rs.500 Crore Opportunity
- The investment: Rs.150 Crores for a fully automated, most-modern plant producing a new value-added HPL product in different sizes and thicknesses, primarily for export with some domestic sales.
- Location and structure: The plant will be on additional land already owned at the Panchkula site, housed under Stylam Pvt Limited, a separate entity already registered.
- Funding: No debt is required; the capex will most likely be funded entirely from internal accruals, with a loan only as a contingency.
- Tax-driven timeline: Management is "very frankly" targeting a start before March 2024 to avail a 15% income tax benefit under Section 1 startup provisions, implying 99% of the spend occurs within FY24.
- Revenue potential: The product carries a minimum Rs.500 Crores turnover target, achievable "easily in 2-3 years," with margins expected to be better than existing products due to differentiated sizing and less competition.
- Information gap: Volume guidance for the new product is unavailable until the next-to-next quarter; only the Rs.500 Crores value figure is confirmed, leaving unit economics unclear for now.
Jagdish Gupta: "I am telling you very frankly, we are targeting to start it before March. We have already covered, going to cover under 1 section startup there is a benefit of income tax 15%, so our target is to start within this year."
Margin Recovery & Cost Dynamics
- Laminate margin target: Management is hopeful that laminate margins will return to 20% in Q1 FY24, recovering from a period where raw material costs rose 40-50% but selling prices increased only 5-10%.
- Full-year expectation: 100 to 150 bps of margin improvement is expected for the full year, driven by better brand reach and acceptability, higher sales and production volumes reducing unit costs, and declining container and transportation expenses.
- Raw material asymmetry: There is some domestic market pressure to reduce prices now that input costs have eased, but not much, because customers recognize the company absorbed the bulk of the earlier raw material spike.
- Employee cost step-up done: Employee costs rose ~Rs.4.5 Crores YoY due to the build-out of a 150+ person domestic sales team; no further additions are planned, so this cost base should now leverage.
- Volume vs. value mix: A sequential volume decline was not a demand signal but a product mix shift toward higher-value products, consistent with the stated strategy of focusing on value addition over volume.
Jagdish Gupta: "When the prices increase so much we have not increased the prices, we could not give customer same prices, so there is at the movement domestically of course people are forcing to reduce it, lot of market pressuring there, but not much pressure, because everybody knows it that we have increased 5% to 10% maximum where as raw material increased at that time for 40% to..."
Demand Environment: No Recession Here
- Export volumes growing: Despite a sequential decline in reported export revenue (Rs.170 to Rs.150 Crores), actual volumes are increasing; the revenue drop is entirely explained by ocean freight normalizing from 15-20% of revenue back to pre-COVID levels.
- European resilience: Management has "not seen any recession in our HPL" business in Europe, pushing back on macro concerns and noting that sales continue to increase there.
- Domestic drivers: New housing demand and replacement demand are both driving growth, with the Stylam brand gaining confidence in the domestic market, particularly in South India, followed by the north, west, and east.
- Export-domestic mix shift: The current 65:35 export-domestic mix is expected to shift toward 60:40 as domestic focus increases, supported by a 150+ person domestic sales structure now fully in place.
Balance Sheet & Working Capital
- Receivables transformation: Receivable days improved to 48 from 66, the lowest level in 10-12 years, with domestic receivables declining and 30-40% of Rs.15 Crores in old 2-3 year pending receivables already booked.
- Cash terms push: The company is moving toward cash payment terms domestically and reducing inventory, a structural shift that should further compress working capital even as the domestic revenue mix increases.
- Balance sheet outlook: Management expects the balance sheet to be "more better" next year, supported by the capex being funded through internal accruals without debt.
- Unresolved: The status of the remaining 60-70% of old receivables was not clarified, and management did not directly address whether domestic customers pay on different terms than export customers.
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Acrylic revenue | Rs.50 Crores turnover; plant closure if missed | FY24 |
| Laminate margins | Return to 20% | Q1 FY24 |
| Full-year margin improvement | 100 to 150 bps increase | FY24 |
| New product capex spend | 99% of Rs.150 Crores spent | FY24 (within the year) |
| New plant start | Operational before March to capture 15% tax benefit | Before March 2024 |
| New product revenue | Minimum Rs.500 Crores turnover | 2-3 years |
| Revenue growth | 20% to 30% increase as capacity rises | Coming year |
| Receivables | Further improvement expected | Next quarter |
Key Metrics
| Metric | Q4 FY23 |
|---|---|
| Revenue | ₹151 cr (laminates), up from ₹86 cr in Q3 |
| Acrylic revenue | ₹9 cr |
| Acrylic monthly turnover (April 2023) | >₹4 cr |
| Acrylic EBITDA breakeven | Achieved |
| Capacity utilization | 75% to 80% |
| Export-domestic mix | 65:35 |
| US export share | 4% to 5% of total |
| Laminates volume sold | 0.27 cr sheets (12 lakhs domestic, 15 lakhs export) |
| Southern region domestic growth | 40% to 45% YoY |
| Receivable days | 48 days, improved from 66 days |
| Operating cash flow | ₹95 cr (FY23) |
| Capex plan (new product) | ₹150 cr, 99% to be spent in FY24, targeting minimum ₹500 cr turnover |
| Brownfield capex | ₹40 cr, 50% already spent, increases capacity up to 40% |
| Existing HPL plant revenue potential | ₹1,200 cr to ₹1,300 cr (including brownfield) |
| Acrylic capacity revenue potential | Minimum ₹400 cr |
| Acrylic capacity utilization | 5% to 6% |
| Employee cost increase | ~₹4.5 cr YoY |
| Old receivables (2-3 years pending) | ₹15 cr, 30% to 40% already booked |
| FY24 revenue growth guidance | 20% to 30% increase expected |
| FY24 margin improvement guidance | 100 to 150 bps increase expected |