Key Takeaways
- Fire disruption, swift restart: A March 25 fire halted the Nandesari plant, triggering a ₹28 Cr write-off; operations resumed May 12 after repairs and clearances.
- Parent shelves India capacity expansion: INEOS prioritizes China over India for now, so near-term capacity addition is off the table despite competitor builds.
- Margins healthy but off peak: Styrene rose ~$400 last quarter, product prices lagged, and margins remain decent though below the highs of a year ago.
- Demand bet on 10%+ ABS growth: Management expects plastics to grow at 1.5x GDP, implying ~10% ABS demand growth, driven by household electronics even without full auto recovery.
- What to watch next quarter: Whether the promised China demand rebound materializes in three to six months, the pace of auto recovery, and any signal from the parent on India investment timing.
Fire Incident & Financial Impact
- Incident timeline: A fire in a section of the Nandesari plant on March 25, 2022, forced a full shutdown. Operations resumed on May 12, 2022, after repairs and all statutory and regulatory clearances were obtained.
- Write-off taken: A ₹28 Crores write-off was booked last quarter because, per financial practices, the company needed to take the financial hit as there are no short-term plans to make that investment in India.
- No disclosed utilization hit: Management declined to disclose current capacity utilization levels when asked, so the operational impact of the shutdown on volumes cannot be quantified from the call.
Capacity & Parent Prioritization
- Expansion on hold: INEOS, as a global company, prioritizes where to invest first, and India is not the priority now. In the short term, INEOS has decided not to proceed with capacity expansion in India, though it may revisit the decision at an appropriate time.
- China first: The parent views India as a very key market, but China is the current priority. Management believes the parent will make a decision on India at an appropriate time, without offering a timeline.
- Sufficient headroom exists: The company has enough existing capacity, including the Moxi plant (~100KT) and an additional 35KT added about two years back. Lower COVID-era demand means there is still enough capacity to run for the next couple of years.
- Competitive response without new capacity: To protect its ABS competitive edge while competitors add capacity, the company can source from global INEOS plants, use unutilized capacity in the short-to-medium term, and focus on margins through new products and the right customer/product mix.
Sanjiv Vasudeva: "India is short of capacity, and we do know that competition is also adding capacity. INEOS is a global company, and as a business they prioritize where to make the investments first, and as of now the priority is not to invest in India that does not mean that at an appropriate time, INEOS may decide to make that investment, but in the short-term INEOS had made a decision not to go ahead with that capacity expansion."
Margin & Raw Material Dynamics
- Styrene-driven pricing: ABS and polystyrene prices are predominantly dependent on styrene prices. Styrene increased by about $400 in the last quarter, and product prices also rose, though not to the same extent.
- Margins decent, not peak: Current margins are healthy but not at the peak levels seen about a year back. Margins remain decent for both ABS and polystyrene. Management predicts healthy margins going forward but declined to give full guidance on margins or a sustainable number for FY2023.
- Capex range given, not fixed: Regular maintenance and upgradation capex for safety and new technologies is already planned in the operating plan for this year and next. When pressed for a quantum, management gave a range of ₹20 Cr to ₹70–80 Cr but did not provide a specific figure for the current or upcoming year.
Sanjiv Vasudeva: "We have good margins, let me put this way, I cannot give any number and make comparisons, but as you rightly guessed it is not the peak margin, but still very healthy margin here."
Demand Environment
- Two-year soft patch: The last two years saw demand on the lower side; a post-COVID surge was followed by flat demand.
- Household electronics the bright spot: Demand from household electronics is good and more sustainable year-on-year, and is expected to be a strong driver of ABS demand growth even without a full automotive recovery.
- Auto mixed: Car demand is good but constrained by semiconductor and supply-chain issues, plus OEMs absorbing higher commodity costs like steel. Two-wheelers continue to lag. January to March was on the lower side for automotive, but April and May have been good months.
- China supply-demand: China is adding a few million tons of ABS capacity over the next five to ten years, but management cautioned that not all announcements turn into actual capacity. Short-term demand is low because of COVID in China, with a rebound expected in three to six months. Supply-demand always balances itself out over a span of three to four years.
- Growth math: Management expects the economy to return to 6%–7% growth; plastics and ABS typically grow at 1.5x GDP, implying ~10% growth going forward. ABS demand is seen at a healthy 10%+ for the foreseeable future, strongly driven by household, electronics, and multiple other segments.
Sanjiv Vasudeva: "Announcements turning into reality, because it is something which has to be clearly thought through because not all announcements turn into actual capacity addition."
Promoter, Cash & Capital Allocation
- OFS executed: On April 18, 2022, the promoter (INEOS Styrolution APAC Pte Limited) proposed an Offer for Sale. On April 19, the promoter sold 24,28,040 equity shares, representing 13.81% of the total paid-up equity share capital. The green shoe option was not exercised.
- No comment on further stake sales: When asked whether promoters plan another OFS or have a target stake to dispose of, management declined to answer, stating it is a question for the promoters and they are not in a position to speak on their behalf.
- Dividend posture: An interim dividend was announced the day before the call. Management cited strong profitability and a very strong cash position, similar to last year. However, the company declined to provide a predictable dividend payout ratio, stating it is the board's discretion and not required to be communicated.
- Cash deployment tied to parent: INEOS is a global company with multiple investments and projects; the company decides based on what makes sense globally, not just for India. Cash will be utilized for investments in India at an appropriate time.
Abhijaat Sinha: "It is not required … like it is company's discretion whether (to pay dividend or not)… there does not need to be a payout ratio to be communicated at all. It depends on the cash availability. We have a policy already in place which says that the board has the right to decide the dividends at appropriate time."
Strategic Vision & Product Development
- Five-year vision: Management articulated a vision of a company with sustained profitability, differentiated and more specialized products, and one that is safe, well-run, and a great place for employees to work.
- R&D pipeline underway: The company is working with several OEMs on lightweight products and scratch-resistant products, as well as on lower odor and specific colors like black for automotive OEMs. Specific products cannot be disclosed.
- ABS competitive edge: The strategy to sustain profitability at fair numbers, though not at peak levels of a year back, rests on new products, the right customer/product mix, and the ability to source from global plants if needed.
Sanjiv Vasudeva: "The five-year vision would be a company which has sustained profitability number one, and number two a company which has differentiated products more specialized products, number three a company which is most importantly safe well-run and a great company for employees to work."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| China demand rebound | Short-term demand low due to COVID; rebound expected | Three to six months |
| ABS demand growth | Healthy 10%+ growth driven by household, electronics, other segments | Foreseeable future |
| Capacity sufficiency | Existing Moxi (~100KT) plus 35KT addition sufficient | Next couple of years |
| India capacity expansion | No expansion; parent may decide at an appropriate time | No timeline (short-term decision is no) |
| Maintenance capex | Planned in operating plan; range ₹20 Cr to ₹70–80 Cr | This year and next year |
| Next investor call | Likely to happen | Somewhere in August |
Key Metrics
| Metric | Q4 FY22 |
|---|---|
| Revenue (net of GST) | ₹623.9 crore, compared to ₹636.55 crore in Jan-Mar 2021 and ₹511.91 crore in Q3 FY22 |
| Profit before tax | ₹130.1 crore, compared to ₹216.45 crore in Jan-Mar 2021 and ₹73.43 crore in Q3 FY22 |
| Full-year FY22 revenue (net of GST) | ₹2,179.02 crore, compared to ₹1,631.48 crore in FY21 |
| Full-year FY22 profit before tax | ₹442.58 crore, compared to ₹376.07 crore in FY21 |
| Specialties segment PBIT | ₹91.95 crore, compared to ₹56.45 crore in Q3 FY22 |
| PS segment PBIT | ₹40.40 crore, compared to ₹18.43 crore in Q3 FY22 |
| Annual O&M capex range | ₹20 crore to ₹70–80 crore, depending on plant upgrade needs |
| ABS demand growth outlook | ~10% annually, plastics and ABS growing at 1.5x GDP |
| India ABS market size | ~250,000 tons total demand, implying ~25,000 tons extra demand per year |
| Automotive demand vs pre-COVID | 10%–15% below 2018/2019 levels |
| Car demand growth | 2% to 3% |
| Styrene price increase | ~$400 increase in the last quarter |
| Promoter stake sold via OFS | 13.81% (24,28,040 equity shares) on April 19, 2022 |
| Write-off taken in prior quarter | ₹28 crore, related to shelved expansion plans |
| Moxi plant capacity | ~100KT, sufficient capacity for the next couple of years |