Key Takeaways
- Scorching growth, margin mix drag: Revenue grew ~52% YoY in Q2, sustaining a 45-50%+ run-rate, but EBITDA margin slipped to 8% as lower-margin vanilla EMS consumer business swelled its share of the mix.
- The consumer pivot is a double-edged sword: A shift from higher-margin ODM to build-to-print OEM within consumer is the sole driver of margin softness; automotive and industrial margins are stable or improving.
- Export ramp is the margin catalyst, but it is a FY25 story: New multinational customers onboarded this year are in prototyping; their ~₹200 crores+ revenue contribution and the margin uplift it brings are expected only in FY24-25.
- IT PLI is the unguided wildcard: Management has not factored it into any guidance, but if secured, the laptop manufacturing opportunity could add revenue in the ₹1,000s of crores, albeit at low margins with a positive working capital profile.
- What to watch next quarter: Whether the ODM share stabilizes as promised, any firm purchase orders from the new export clients, and the IT PLI policy outcome, which could reshape the medium-term revenue base.
Growth & Revenue Mix
- Top-line momentum intact: Revenue grew ~52% YoY in Q2 and ~55% YoY for the half-year, continuing a 4-5 quarter streak of 45-50%+ growth. Management sees growth hovering upwards of 35% for at least the next 2-3 years.
- H1/H2 seasonality holds: The first half typically contributes ~45% of annual revenue, a pattern expected to continue, implying a full-year organic revenue around ₹2,850-₹3,100 crores.
- Consumer is the growth engine, for now: Consumer now accounts for a little more than one-third of revenue, driven by build-to-print vanilla EMS; automotive is ~1/4, industrial a little more than 1/4, and healthcare saw a slight revival in absolute terms but its percentage share declined as other segments grew faster.
- Exports growing in absolute terms, but share diluted: Exports grew 12% QoQ and 9% YoY to 26% of sales, but domestic demand surged 78%, pushing the export share below management's 1/3 wish list.
- New export customers are in the pipeline, not yet in P&L: Multinational clients onboarded in late CY23 are in prototyping and sampling; series production is expected to start in January or April of next year, with ~₹200 crores+ in revenue expected in FY24-25.
- JDHL acquisition consolidated, contribution small for now: The 51% stake was acquired on 5th September, contributing less than ₹10 crores in revenue during the partial quarter; full positive impact is expected in the next six months.
Gujral: "we are very confident that the pace of growth will continue, the momentum will continue into the future and at least for the next two to three years, we see growth hovering upwards of 35% on an overall basis."
Margin Walk & The Consumer Mix Shift
- The margin drag is a mix story, not a pricing one: EBITDA margin came in at 8% (7% operating EBITDA after a one-time JDHL acquisition charge); internal margins in every vertical are stable or improving, but the overall percentage fell because lower-margin vanilla EMS consumer business grew faster than higher-margin ODM and other segments.
- Consumer ODM share dropped sharply: ODM as a share of consumer revenue fell from 23% last year to 17% this year, as growth came overwhelmingly from build-to-print OEM contracts with very competitive margins. ODM margins themselves are maintained or increasing.
- Gross material margin stuck at ~24%: This will improve only when exports from newly onboarded clients kick in next year; current-year export growth is vanilla business from existing clients.
- Operating efficiency is a partial offset: Overhead costs improved ~5% in H1 FY24 vs H1 last year, and further improvement is expected, but it was not enough to fully offset the mix headwind.
- No similar mix risk in other segments: Management confirmed there is no significant change in the order book or product mix for industrial, automotive, or healthcare; the margin volatility is isolated to consumer.
- Long-term margin levers identified: Management's strategy to reach double-digit EBITDA margins rests on exporting ~1/3 of revenue and growing design-led manufacturing to 25% of revenue (currently 18%).
Gujral: "One quarter here, there, I'm sensitive to it. It hurts me, so I'm sort of alive to it. But I'm not hung up about it that I would sacrifice my long-term objectives and wages for achieving the short-term objectives."
Working Capital & Balance Sheet
- Working capital cycle stable at ~70 days: The cycle has been brought down from upwards of 90 days historically; quarter-on-quarter variations of 3 days are commercial plays, not structural deterioration. Management targets a further 4-6 day reduction.
- Inventory build is tied to the export ramp: Temporary working capital pressure came from securing minimum order quantities for new export customers (e.g., spool sizes of 5,000 components for 100-piece production runs), a necessary step ahead of series production.
- Working capital profile varies by business type: Low-margin, high-volume consumer business runs at 30-40 days; higher-margin, lower-volume industrial and automotive businesses run at 60-80 days. As consumer grows its share, the blended working capital cycle benefits, but the margin percentage suffers.
- OCF to EBITDA target is 50%+: H1 delivered only 20%, but management expects working capital efficiencies in H2 to close the gap toward the steady-state target.
- Capex on track: ~₹250 crores planned this year apart from acquisitions; ~₹110 crores spent so far, with another ~₹100-₹140 crores expected on the new Hosur greenfield in the next two quarters. All capex is targeted to yield revenue in FY24-25.
Strategic Bets & New Verticals
- IT PLI is the high-stakes, zero-guidance opportunity: The IT hardware PLI policy was expected imminently; if Syrma secures it and ties up with a large customer, laptop manufacturing revenue could reach ₹1,000s of crores. The product is low-margin but high-volume and positive on working capital. No PLI benefit is factored into any guidance.
- Design & engineering services as a margin engine: A separate design center was set up in April 2023, with marketing presence beefed up in the US and UK. A hypothetical ₹30 crores revenue stream would carry 45-50% EBITDA with zero material cost, dropping straight to the bottom line.
- IoT manufacturer win: Syrma signed up with one of the world's largest IoT manufacturers; sampling production passed tests, and the client's engineers are now working in Syrma's factories to stabilize processes.
- OSAT/ATMP evaluation is cautious and open-ended: Management sees no first-mover advantage, as any Indian entrant would tie up with a foreign partner and migrate an existing supply chain. The huge capex cycle demands caution; no final decision has been taken.
- PCB manufacturing explicitly ruled out: Management will not enter PCB manufacturing, calling it a chemical industry outside its core competency, and noting that no global EMS peer (Foxconn, Flex, Jabil, Sanmina) is in that business.
- Long-term diversification objective: Management wants no single industry segment to exceed 25% of revenue over the long term, with five growth verticals identified: automotive, industrial, aircon, IoT, and engineering services.
Gujral: "if the people, the companies who get the IT PLI and are able to tie-up with big customers, the revenue growth will not be in INR100 crores or INR200 crores, it will be in INR1,000 of crores."
Certifications & Competitive Moat
- IPC 610 Class 1, 2, 3 certification secured: This qualifies Syrma for international business across consumer, industrial, automotive, and aerospace. The only other Indian company with this certification was SFO Technologies (Nov '22); Siemens holds only Class 2, which excludes aerospace and automotive qualification.
- RDSO approval received: This enables participation in the railway business, though management cautioned that even 100% growth in railways would contribute only 3-3.5% of total revenue given the long gestation of industrial and railway contracts.
- Japanese aircon tie-up: Syrma has tied up with a leading Japanese manufacturer for the aircon business and is already generating reasonably good revenues from it.
Gujral: "The only other company which got this certification in November of '22 was SFO Technologies. Besides that Siemens is the only company which has a Class 2 certification, which means they're not qualified as for the certification for aerospace automotive."
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Revenue growth trajectory | Growth hovering upwards of 35% on an overall basis | At least next 2-3 years |
| Full-year organic revenue | ~₹2,850-₹3,100 crores (H1 ~45% of full year) | FY24 |
| Export revenue from new clients | ~₹200 crores+ from multinational customers onboarded in late CY23 | FY24-25 |
| Working capital days | Reduce by 4-6 days from current ~70 days | Next 2-3 quarters |
| ODM share in consumer | Expected to rise ~3-4%, reaching about 20% | Next year |
| Long-term EBITDA margin | Above double digits, driven by 1/3 export share and 25% design-led manufacturing | Medium term |
| Capex (Hosur greenfield) | ~₹100-₹140 crores spend | Next two quarters |
| Green energy sourcing | 50% of energy from green sources | No date given |
Key Metrics
| Metric | Q2 FY24 |
|---|---|
| Revenue | ~52% YoY growth; half-year growth ~55% YoY |
| EBITDA | ₹58 cr, ~28% higher YoY; H1 EBITDA ₹117 cr |
| Operating EBITDA margin | ~7%, after one-time charge of ~₹4-4.5 cr related to JDHL acquisition; ~8% excluding one-time charge |
| PAT (H1 FY24) | ~₹59 cr, ~28% growth YoY |
| Gross material margin | ~24% |
| Revenue mix: Consumer | A little more than a third of revenue |
| Revenue mix: Automotive | About a fourth of revenue |
| Revenue mix: Industrial | A little more than a fourth of revenue |
| Healthcare revenue | ₹35+ cr in Q2, achieved as projected |
| Exports as % of sales | ~26%, growth of ~12% QoQ and ~9% YoY |
| Domestic demand business growth | 78% |
| Total open order book | ~₹3,800 cr, of which ~₹3,000-3,200 cr expected to complete over next 12 months |
| Order book mix: Export | ~20% of order book |
| Order book mix: Consumer | ~45-50% of order book |
| Net working capital days | ~70 days, ~3 days higher QoQ due to higher inventory |
| Net cash position | ~₹125 cr as of September end; debt ~₹420 cr, treasury ~₹545 cr |
| Capex spent in H1 FY24 | ~₹110 cr, of which ~₹60 cr in Q2; full year target ₹200-250 cr |
| ODM share of revenue | 17% this quarter, down from 23% last year; design-led manufacturing currently 18% of revenue |
| PLI expected for FY24 | ~₹45-50 cr, not yet accounted for in financials |
| JDHL revenue consolidated in Q2 | Less than ₹10 cr, for less than one month post-acquisition |
| Tax rate (steady-state consolidated) | 25-26% expected going forward |
| OCF to EBITDA target | 50%+ on steady basis; H1 was about 20% |