Key Takeaways
- Turnaround quarter, production restarted: Net profit swung to ₹13.51 crores from a Q1 loss of ₹22.53 crores, driven by wagon production ramping to 477 units after prototype approval unlocked operations in August.
- Wagon ramp is the engine, but foundry is the bottleneck: Heavy Engineering revenue hit ~₹240 crores, with wagons contributing ~₹160–170 crores, yet management flagged that ramping wagon output is straining the in-house foundry, which must now gear up after a period of low suction.
- Rail EPC is pivoting hard to protect liquidity: Management is consciously exiting long-gestation track-laying projects that have blocked ~₹1,000 crores in unbilled revenue and other current assets, and will focus only on signaling, ballast-less track, electrification and auto fare collection where cash conversion is faster.
- The balance sheet carries a working-capital overhang: Debt of ₹660–670 crores is mostly working capital, not long-term leverage, but management expects it to stay at this level or rise as railway bulk orders execute, while ~₹200 crores of GST receivables may take 1–1.5 years to realize.
- What to watch next quarter: Whether wagon production hits the promised optimum run-rate by December, whether the foundry keeps pace without margin-diluting external purchases, and whether the Rail EPC strategy shift starts freeing up the ~₹1,000 crores blocked in unbilled revenue.
Wagon Production Ramp & Heavy Engineering
- Q1 was a near-standstill: Only ~120 wagons were produced because the company had no railway orders and Rail Wheel Factory prioritized railway customers over private orders, blocking wheel-set supply entirely.
- Proto approval unlocked Q2: Prototype approval came in end-July, production started in August, WIP build-up took 10–15 days, and full-saddle production ran from mid-August, delivering 477 wagons for the quarter.
- December target for optimum run-rate: Management expects to reach a maximized production position by next month (December 2022) and aims to go much higher than the current ~300 wagons/month, working toward that direction.
- FY23 and FY24 delivery targets restated: The FY23 target of 3,300 wagons remains on track barring untoward or critical political situations; FY24 target is set at 6,600 wagons, implying a doubling of output.
- Heavy Engineering revenue split: Of ~₹240 crores in Q2, ~₹160–170 crores came from wagons, ~₹50 crores from hydromechanical and bridges, and the rest from rolling stock, showing how concentrated the division is on the wagon cycle.
- Foundry is the constraint to watch: As wagon production ramps, it puts pressure on the foundry because most key components come in-house; foundry production is being geared up after a period of low suction, and the company is adding balancing equipment to meet wagon and committed export order requirements.
- Capacity utilization ambition: Wagon plant capacity is 8,000–9,000 wagons and foundry capacity is 42,000 tonnes per annum; management’s endeavor is to reach closer to those levels, with the foundry targeting 80% utilization (~32,000 tonnes) as a “very good” benchmark.
- CAPEX is cautious and staged: The approach is to invest only in balancing equipment first, test existing infrastructure at full utilization, then consider major expansion; roughly ₹100 crores of CAPEX is controlled under this philosophy.
Mookerjee: “There seems to be a worldwide shortage, but there seems to be also many challenges because in order to gear up to higher volume, it requires lots of other inputs like components and people, etc. which take time to gear up. So, while it's a good problem to have, it also has its own challenges.”
Rail EPC: Strategy Reset & Liquidity Overhang
- Track-laying is being consciously abandoned: Management has decided not to focus on the rail track segment because projects get delayed beyond limits due to land acquisition, bridge construction, litigation and claims settlement, leading to large claims, cash crunches and liquidity crises.
- Core strengths become the sole focus: The Rail EPC business will concentrate on signaling, ballast-less track, rail electric overhead and auto fare collection systems, areas where financials remain under control and projects are done expeditiously, avoiding delays from land, civil or governmental actions.
- ~₹1,000 crores blocked in current assets: This blockage is primarily in unbilled revenue from Rail EPC because milestones cannot be achieved due to third-party delays or railways not handing over encumbrance-free areas; an additional ~₹200 crores is GST receivable expected to be realized within 1–1.5 years.
- Kalindee Rail turned the corner: Kalindee turned profitable in Q2 after setbacks in previous quarters, while Bright Power, the other Rail EPC division, has always been positive and growing fast, suggesting the portfolio cleanup is already showing results.
- Maintenance is the next horizon: Management sees railway maintenance in signaling, electrification and metro track repair as a big future opportunity with better liquidity and faster turnover, positioning it as a natural complement to the core-strength strategy.
- Rail EPC is a multi-decade story: Management views the business as a 10–20 year opportunity given government focus on rail infrastructure, and noted this is the first time the government is visibly “walking the talk” on expediting the segment.
- Smaller, end-to-end contracts preferred: The shift is toward contracts with end-to-end tie-ups that avoid the working-capital traps of long-gestation projects, reflecting a deliberate liquidity-preservation mindset.
Vijay: “I don't want to get into a situation whereby my liquidity and cash flow is blocked for long. As you see in the Kalindee balance sheet today, we are heavily blocked on liquidity and cash flow because of these reasons.”
Steel Foundry: Turnover, Order Book & Capacity
- Q2 turnover of ~₹191 crores: The Steel Foundry division contributed meaningfully to consolidated revenue, with an order book of ₹260 crores that management expects to swell once wagon supply starts, since wagons include large foundry orders.
- Utilization is climbing from a low base: The foundry went through a period of low suction from the wagon plant during the prototype approval phase, and production is now being geared up to match the wagon division’s ramp.
- 80% utilization is the stated benchmark: Management’s endeavor is to achieve ~32,000 tonnes of output against 42,000 tonnes capacity, calling 80% utilization “very good” in normal standards, and possibly going beyond.
- Balancing equipment being added: Rather than a large CAPEX cycle, the company is adding balancing equipment to meet wagon and committed export order requirements, consistent with the test-before-invest philosophy.
- Much improved performance expected: Management signaled confidence that foundry performance will improve materially in coming days as the wagon ramp pulls through orders and utilization rises.
Balance Sheet, Working Capital & Margins
- Debt is working-capital-driven, not structural: Total debt of ₹660–670 crores is mostly working capital; long-term debt is only ~₹200 crores, so the company is not highly leveraged on a long-term basis, and the promoter group remains supportive via preferential issues and rights issues as needed.
- Working capital debt will not decline soon: Management expects it to continue at the same level or move upward due to railway bulk order execution, and does not foresee a reduction in finance cost within the year given rising interest rates across the country.
- Other current assets are a management focus: Management is conscious of not allowing other current assets, debtors and inventory to rise beyond certain levels and expects them to start coming down, providing additional liquidity, though no timeline was given.
- Margin improvement is tied to volume, not price: Management affirmed that further margin improvement is possible across all three divisions because as production improves, overhead costs do not rise commensurately, automatically reflecting in the bottom line, but explicitly declined to provide forward margin guidance, calling it a policy matter.
- H1 FY23 profitability declined YoY: H1 EBITDA fell to ₹51.59 crores from ₹85.61 crores and the company posted a net loss of ₹8.99 crores vs a profit of ₹10.5 crores, entirely because Q1 suffered from no railway orders and the wheel-set bottleneck.
Vijay: “I will refrain from coming across on the margin levels and all this thing since this is a very forward-looking statement, the company as a policy don't want to make.”
Organization, Leadership & Strategic Positioning
- New Managing Director appointed: Rakesh Tripathi has been appointed as Managing Director to lead entire operations, profitability and governance; management described the organization as professionally run with promoters hands-off at the operating level, though the specific role of the new MD was not detailed when an analyst asked.
- Fresh blood being brought in: Management is constantly looking at gaps and trying to bring in fresh talent to modernize and renew the organization, framing this as an ongoing process rather than a one-time change.
- Export inquiries are rising: The company is getting a lot of export inquiries and is gearing up to meet all requirements, aiming to encash the opportunity in what management described as a booming rail segment.
- Strategic focus over sprawl: Management has done exercises to define where competencies and credentials lie, and does not want to spread itself “like wall-to-wall carpet,” preferring to be very strategic in business selection.
Mookerjee: “We don't want to go all over the business and spread ourselves like wall-to-wall carpet. We want to be very strategic. We have defined, we have done exercises to find out where our competencies lie, where we have credentials, which others don't have.”
Guidance & Commitments
| Commitment | Specifics | Timeline |
|---|---|---|
| Wagon production optimum run-rate | Reach maximized position on wagon production | By December 2022 |
| FY23 wagon delivery target | 3,300 wagons | FY23, barring untoward or critical political situations |
| FY24 wagon production target | 6,600 wagons | FY24 |
| Steel Foundry capacity utilization | Achieve 80% utilization (~32,000 tonnes), possibly beyond | No date; “coming days” |
| GST receivable realization | ~₹200 crores to be realized | Within 1–1.5 years |
| Other current assets reduction | Debtors, inventory and other current assets expected to start coming down | No date; management is “conscious” of the level |
| Rail EPC strategic focus | Focus only on signaling, ballast-less track, electrification, auto fare collection; exit track-laying | Effective immediately |
Key Metrics
| Metric | Q2 FY23 |
|---|---|
| Gross revenue | ₹497 cr, vs ₹379 cr in Q2 FY22 and ₹305 cr in Q1 FY23 |
| EBITDA | ₹55.21 cr, vs ₹44.04 cr in Q2 FY22 and negative ₹3.62 cr in Q1 FY23 |
| Net profit after tax | ₹13.51 cr, vs ₹5.85 cr in Q2 FY22 and net loss of ₹22.53 cr in Q1 FY23 |
| Gross revenue (H1 FY23) | ₹802 cr, vs ₹716 cr in H1 FY22 |
| EBITDA (H1 FY23) | ₹51.59 cr, vs ₹85.61 cr in H1 FY22 |
| Net loss after tax (H1 FY23) | ₹(-8.99) cr, vs net profit of ₹10.5 cr in H1 FY22 |
| Total order book | Close to ₹9,300 cr, comprising Heavy Engineering ₹7,500 cr, Steel Foundry ₹260 cr, Rail EPC ₹1,325 cr, others ~₹200 cr |
| Wagon production | 477 wagons, vs nearly 120 wagons in Q1 FY23; production started mid-August after prototype approval in July |
| Wagon production run rate | Close to 300 wagons a month |
| FY23 wagon delivery target | 3,300 wagons, no change from prior guidance |
| FY24 wagon production target | 6,600 wagons |
| Heavy Engineering Q2 revenue | ~₹240 cr, of which ~₹160–170 cr from wagons, ~₹50 cr from hydromechanical and bridges, remainder from rolling stock |
| Steel Foundry Q2 turnover | ~₹191 cr |
| Total debt | ~₹660–670 cr as of September, of which long-term debt ~₹200 cr and rest working capital debt |
| Other current assets blocked | ~₹1,000 cr, primarily unbilled revenue from Rail EPC; ~₹200 cr in GST receivable |
| CAPEX plan | Conservative, targeting ~₹100 cr for balancing equipment only; major expansion deferred until existing assets tested at full capacity |